On Tue Sep 12, 2023 at 2:11 PM EEST, David Gstir wrote:
> DCP is capable to performing AES with hardware-bound keys.
> These keys are not stored in main memory and are therefore not directly
> accessible by the operating system.
>
> So instead of feeding the key into DCP, we need to place a
> reference to such a key before initiating the crypto operation.
> Keys are referenced by a one byte identifiers.
>
> DCP supports 6 different keys: 4 slots in the secure memory area,
> a one time programmable key which can be burnt via on-chip fuses
> and an unique device key.
>
> Using these keys is restricted to in-kernel users that use them as building
> block for other crypto tools such as trusted keys. Allowing userspace
> (e.g. via AF_ALG) to use these keys to crypt or decrypt data is a security
> risk, because there is no access control mechanism.
>
> Co-developed-by: Richard Weinberger <richard@xxxxxx>
> Signed-off-by: Richard Weinberger <richard@xxxxxx>
> Co-developed-by: David Oberhollenzer <david.oberhollenzer@xxxxxxxxxxxxx>
> Signed-off-by: David Oberhollenzer <david.oberhollenzer@xxxxxxxxxxxxx>
> Signed-off-by: David Gstir <david@xxxxxxxxxxxxx>
> ---
> drivers/crypto/mxs-dcp.c | 107 +++++++++++++++++++++++++++++++++++----
> include/soc/fsl/dcp.h | 19 +++++++
> 2 files changed, 115 insertions(+), 11 deletions(-)
> create mode 100644 include/soc/fsl/dcp.h
>
> diff --git a/drivers/crypto/mxs-dcp.c b/drivers/crypto/mxs-dcp.c
> index f6b7bce0e656..d525cb41f2ca 100644
> --- a/drivers/crypto/mxs-dcp.c
> +++ b/drivers/crypto/mxs-dcp.c
> @@ -15,6 +15,7 @@
> #include <linux/platform_device.h>
> #include <linux/stmp_device.h>
> #include <linux/clk.h>
> +#include <soc/fsl/dcp.h>
>
> #include <crypto/aes.h>
> #include <crypto/sha1.h>
> @@ -101,6 +102,7 @@ struct dcp_async_ctx {
> struct crypto_skcipher *fallback;
> unsigned int key_len;
> uint8_t key[AES_KEYSIZE_128];
> + bool refkey;
> };
>
> struct dcp_aes_req_ctx {
> @@ -155,6 +157,7 @@ static struct dcp *global_sdcp;
> #define MXS_DCP_CONTROL0_HASH_TERM (1 << 13)
> #define MXS_DCP_CONTROL0_HASH_INIT (1 << 12)
> #define MXS_DCP_CONTROL0_PAYLOAD_KEY (1 << 11)
> +#define MXS_DCP_CONTROL0_OTP_KEY (1 << 10)
> #define MXS_DCP_CONTROL0_CIPHER_ENCRYPT (1 << 8)
> #define MXS_DCP_CONTROL0_CIPHER_INIT (1 << 9)
> #define MXS_DCP_CONTROL0_ENABLE_HASH (1 << 6)
> @@ -168,6 +171,8 @@ static struct dcp *global_sdcp;
> #define MXS_DCP_CONTROL1_CIPHER_MODE_ECB (0 << 4)
> #define MXS_DCP_CONTROL1_CIPHER_SELECT_AES128 (0 << 0)
>
> +#define MXS_DCP_CONTROL1_KEY_SELECT_SHIFT 8
> +
> static int mxs_dcp_start_dma(struct dcp_async_ctx *actx)
> {
> int dma_err;
> @@ -224,13 +229,16 @@ static int mxs_dcp_run_aes(struct dcp_async_ctx *actx,
> struct dcp *sdcp = global_sdcp;
> struct dcp_dma_desc *desc = &sdcp->coh->desc[actx->chan];
> struct dcp_aes_req_ctx *rctx = skcipher_request_ctx(req);
> + bool key_referenced = actx->refkey;
> int ret;
>
> - key_phys = dma_map_single(sdcp->dev, sdcp->coh->aes_key,
> - 2 * AES_KEYSIZE_128, DMA_TO_DEVICE);
> - ret = dma_mapping_error(sdcp->dev, key_phys);
> - if (ret)
> - return ret;
> + if (!key_referenced) {
> + key_phys = dma_map_single(sdcp->dev, sdcp->coh->aes_key,
> + 2 * AES_KEYSIZE_128, DMA_TO_DEVICE);
> + ret = dma_mapping_error(sdcp->dev, key_phys);
> + if (ret)
> + return ret;
> + }
>
> src_phys = dma_map_single(sdcp->dev, sdcp->coh->aes_in_buf,
> DCP_BUF_SZ, DMA_TO_DEVICE);
> @@ -255,8 +263,13 @@ static int mxs_dcp_run_aes(struct dcp_async_ctx *actx,
> MXS_DCP_CONTROL0_INTERRUPT |
> MXS_DCP_CONTROL0_ENABLE_CIPHER;
>
> - /* Payload contains the key. */
> - desc->control0 |= MXS_DCP_CONTROL0_PAYLOAD_KEY;
> + if (key_referenced) {
> + /* Set OTP key bit to select the key via KEY_SELECT. */
> + desc->control0 |= MXS_DCP_CONTROL0_OTP_KEY;
> + } else {
> + /* Payload contains the key. */
> + desc->control0 |= MXS_DCP_CONTROL0_PAYLOAD_KEY;
> + }
Remove curly braces (coding style).
>
> if (rctx->enc)
> desc->control0 |= MXS_DCP_CONTROL0_CIPHER_ENCRYPT;
> @@ -270,6 +283,9 @@ static int mxs_dcp_run_aes(struct dcp_async_ctx *actx,
> else
> desc->control1 |= MXS_DCP_CONTROL1_CIPHER_MODE_CBC;
>
> + if (key_referenced)
> + desc->control1 |= sdcp->coh->aes_key[0] << MXS_DCP_CONTROL1_KEY_SELECT_SHIFT;
> +
> desc->next_cmd_addr = 0;
> desc->source = src_phys;
> desc->destination = dst_phys;
> @@ -284,9 +300,10 @@ static int mxs_dcp_run_aes(struct dcp_async_ctx *actx,
> err_dst:
> dma_unmap_single(sdcp->dev, src_phys, DCP_BUF_SZ, DMA_TO_DEVICE);
> err_src:
> - dma_unmap_single(sdcp->dev, key_phys, 2 * AES_KEYSIZE_128,
> - DMA_TO_DEVICE);
> -
> + if (!key_referenced) {
> + dma_unmap_single(sdcp->dev, key_phys, 2 * AES_KEYSIZE_128,
> + DMA_TO_DEVICE);
> + }
Ditto.
> return ret;
> }
>
> @@ -453,7 +470,7 @@ static int mxs_dcp_aes_enqueue(struct skcipher_request *req, int enc, int ecb)
> struct dcp_aes_req_ctx *rctx = skcipher_request_ctx(req);
> int ret;
>
> - if (unlikely(actx->key_len != AES_KEYSIZE_128))
> + if (unlikely(actx->key_len != AES_KEYSIZE_128 && !actx->refkey))
> return mxs_dcp_block_fallback(req, enc);
>
> rctx->enc = enc;
> @@ -500,6 +517,7 @@ static int mxs_dcp_aes_setkey(struct crypto_skcipher *tfm, const u8 *key,
> * there can still be an operation in progress.
> */
> actx->key_len = len;
> + actx->refkey = false;
> if (len == AES_KEYSIZE_128) {
> memcpy(actx->key, key, len);
> return 0;
> @@ -516,6 +534,33 @@ static int mxs_dcp_aes_setkey(struct crypto_skcipher *tfm, const u8 *key,
> return crypto_skcipher_setkey(actx->fallback, key, len);
> }
>
> +static int mxs_dcp_aes_setrefkey(struct crypto_skcipher *tfm, const u8 *key,
> + unsigned int len)
> +{
> + struct dcp_async_ctx *actx = crypto_skcipher_ctx(tfm);
> +
> + if (len != DCP_PAES_KEYSIZE)
> + return -EINVAL;
> +
> + switch (key[0]) {
> + case DCP_PAES_KEY_SLOT0:
> + case DCP_PAES_KEY_SLOT1:
> + case DCP_PAES_KEY_SLOT2:
> + case DCP_PAES_KEY_SLOT3:
> + case DCP_PAES_KEY_UNIQUE:
> + case DCP_PAES_KEY_OTP:
> + memcpy(actx->key, key, len);
> + break;
I don't understand why the "commit" is split into two parts
(memcpy and assignments in different code blocks). You should
probably rather:
switch (key[0]) {
case DCP_PAES_KEY_SLOT0:
case DCP_PAES_KEY_SLOT1:
case DCP_PAES_KEY_SLOT2:
case DCP_PAES_KEY_SLOT3:
case DCP_PAES_KEY_UNIQUE:
case DCP_PAES_KEY_OTP:
memcpy(actx->key, key, len);
actx->key_len = len;
actx->refkey = true;
return 0;
default:
return -EINVAL;
}
}
Or alternatively you can move all operations after the switch-case
statement. IMHO, any state change is better to put into a singular
location.
> + default:
> + return -EINVAL;
> + }
> +
> + actx->key_len = len;
> + actx->refkey = true;
> +
> + return 0;
> +}
> +
> static int mxs_dcp_aes_fallback_init_tfm(struct crypto_skcipher *tfm)
> {
> const char *name = crypto_tfm_alg_name(crypto_skcipher_tfm(tfm));
> @@ -539,6 +584,13 @@ static void mxs_dcp_aes_fallback_exit_tfm(struct crypto_skcipher *tfm)
> crypto_free_skcipher(actx->fallback);
> }
>
> +static int mxs_dcp_paes_init_tfm(struct crypto_skcipher *tfm)
> +{
> + crypto_skcipher_set_reqsize(tfm, sizeof(struct dcp_aes_req_ctx));
> +
> + return 0;
> +}
> +
> /*
> * Hashing (SHA1/SHA256)
> */
> @@ -889,6 +941,39 @@ static struct skcipher_alg dcp_aes_algs[] = {
> .ivsize = AES_BLOCK_SIZE,
> .init = mxs_dcp_aes_fallback_init_tfm,
> .exit = mxs_dcp_aes_fallback_exit_tfm,
> + }, {
> + .base.cra_name = "ecb(paes)",
> + .base.cra_driver_name = "ecb-paes-dcp",
> + .base.cra_priority = 401,
> + .base.cra_alignmask = 15,
> + .base.cra_flags = CRYPTO_ALG_ASYNC | CRYPTO_ALG_INTERNAL,
> + .base.cra_blocksize = AES_BLOCK_SIZE,
> + .base.cra_ctxsize = sizeof(struct dcp_async_ctx),
> + .base.cra_module = THIS_MODULE,
> +
> + .min_keysize = DCP_PAES_KEYSIZE,
> + .max_keysize = DCP_PAES_KEYSIZE,
> + .setkey = mxs_dcp_aes_setrefkey,
> + .encrypt = mxs_dcp_aes_ecb_encrypt,
> + .decrypt = mxs_dcp_aes_ecb_decrypt,
> + .init = mxs_dcp_paes_init_tfm,
> + }, {
> + .base.cra_name = "cbc(paes)",
> + .base.cra_driver_name = "cbc-paes-dcp",
> + .base.cra_priority = 401,
> + .base.cra_alignmask = 15,
> + .base.cra_flags = CRYPTO_ALG_ASYNC | CRYPTO_ALG_INTERNAL,
> + .base.cra_blocksize = AES_BLOCK_SIZE,
> + .base.cra_ctxsize = sizeof(struct dcp_async_ctx),
> + .base.cra_module = THIS_MODULE,
> +
> + .min_keysize = DCP_PAES_KEYSIZE,
> + .max_keysize = DCP_PAES_KEYSIZE,
> + .setkey = mxs_dcp_aes_setrefkey,
> + .encrypt = mxs_dcp_aes_cbc_encrypt,
> + .decrypt = mxs_dcp_aes_cbc_decrypt,
> + .ivsize = AES_BLOCK_SIZE,
> + .init = mxs_dcp_paes_init_tfm,
> },
> };
>
> diff --git a/include/soc/fsl/dcp.h b/include/soc/fsl/dcp.h
> new file mode 100644
> index 000000000000..df6678ee10a1
> --- /dev/null
> +++ b/include/soc/fsl/dcp.h
> @@ -0,0 +1,19 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (C) 2021 sigma star gmbh
> + * Authors: David Gstir <david@xxxxxxxxxxxxx>
> + * Richard Weinberger <richard@xxxxxxxxxxxxx>
Git already has author-field and commit can have co-developed-by so
this is totally obsolete.
> + */
> +
> +#ifndef MXS_DCP_H
> +#define MXS_DCP_H
> +
> +#define DCP_PAES_KEYSIZE 1
> +#define DCP_PAES_KEY_SLOT0 0x00
> +#define DCP_PAES_KEY_SLOT1 0x01
> +#define DCP_PAES_KEY_SLOT2 0x02
> +#define DCP_PAES_KEY_SLOT3 0x03
> +#define DCP_PAES_KEY_UNIQUE 0xfe
> +#define DCP_PAES_KEY_OTP 0xff
> +
> +#endif /* MXS_DCP_H */
> --
> 2.35.3
BR, Jarkko
