> > I got this issue, if I remember correctly, I fixed it by enabling > > CONFIG_ARM_AMBA and CONFIG_AMBA_PL08X. It improved things a bit, I still see the list_add corruption trace with CONFIG_ARM_AMBA and CONFIG_AMBA_PL08X set: [ 3.528140] ------------[ cut here ]------------ [ 3.528535] dwmmc_starfive 16020000.mmc: IDMAC supports 32-bit address mode. [ 3.532795] list_add corruption. next->prev should be prev (ffffffff816ec4d0), but was ffffffff80e33f38. (next=ffffffd8c0133c40). [ 3.539866] dwmmc_starfive 16020000.mmc: Using internal DMA controller. [ 3.551539] WARNING: CPU: 2 PID: 10 at lib/list_debug.c:27 __list_add_valid+0x8a/0xac [ 3.551564] Modules linked in: [ 3.551574] CPU: 2 PID: 10 Comm: kworker/u8:0 Not tainted 6.5.0zeha3-00072-g385eddf4e78f #6 [ 3.551586] Hardware name: StarFive VisionFive 2 v1.2A (DT) [ 3.551592] Workqueue: events_unbound deferred_probe_work_func [ 3.551607] epc : __list_add_valid+0x8a/0xac [ 3.551618] ra : __list_add_valid+0x8a/0xac [ 3.551628] epc : ffffffff804d21be ra : ffffffff804d21be sp : ffffffc80006bb50 [ 3.551636] gp : ffffffff81723980 tp : ffffffd8c0156780 t0 : 2000000000000000 [ 3.551644] t1 : 000000000000006c t2 : 206464615f747369 s0 : ffffffc80006bb60 [ 3.551652] s1 : ffffffd8c200ae40 a0 : 0000000000000075 a1 : 0000000000000018 [ 3.551659] a2 : 0000000000000010 a3 : 0000000000000000 a4 : 0000000000000000 [ 3.551665] a5 : 0000000000000000 a6 : ffffffd8c0242640 a7 : 0000000000000038 [ 3.551672] s2 : ffffffd8c0133c40 s3 : ffffffff816ec400 s4 : ffffffd8c00f7410 [ 3.551680] s5 : ffffffd8c200af30 s6 : ffffffff816ec4d0 s7 : ffffffd8c004c038 [ 3.551687] s8 : 0000000000000402 s9 : ffffffff80024be4 s10: 0000000000001000 [ 3.551694] s11: ffffffd8c008fc00 t3 : ffffffff81736f17 t4 : ffffffff81736f17 [ 3.551701] t5 : ffffffff81736f18 t6 : ffffffff81736f17 [ 3.551707] status: 0000000200000120 badaddr: 0000000000000000 cause: 0000000000000003 [ 3.551715] [<ffffffff804d21be>] __list_add_valid+0x8a/0xac [ 3.551727] [<ffffffff808672a8>] starfive_cryp_probe+0x184/0x3fa [ 3.551745] [<ffffffff8061fcfa>] platform_probe+0x4e/0x92 [ 3.551759] [<ffffffff8061d96a>] really_probe+0x82/0x210 [ 3.551770] [<ffffffff8061db54>] __driver_probe_device+0x5c/0xd0 [ 3.551782] [<ffffffff8061dbf4>] driver_probe_device+0x2c/0xb0 [ 3.551793] [<ffffffff8061dce6>] __device_attach_driver+0x6e/0x8e [ 3.551805] [<ffffffff8061bc66>] bus_for_each_drv+0x5c/0xb0 [ 3.551816] [<ffffffff8061dfa4>] __device_attach+0x82/0x144 [ 3.551827] [<ffffffff8061e1dc>] device_initial_probe+0xe/0x16 [ 3.551839] [<ffffffff8061cb76>] bus_probe_device+0x86/0x88 [ 3.551849] [<ffffffff8061d73c>] deferred_probe_work_func+0x86/0xbe [ 3.551861] [<ffffffff80024a0c>] process_one_work+0x162/0x284 [ 3.551876] [<ffffffff80024cd2>] worker_thread+0x1a4/0x348 [ 3.551889] [<ffffffff8002bde6>] kthread+0xc2/0xd6 [ 3.551900] [<ffffffff8000336a>] ret_from_fork+0xa/0x1c [ 3.551913] ---[ end trace 0000000000000000 ]--- > > name: StarFive VisionFive 2 v1.2A (DT) epc : crypto_wait_for_test+0x8e/0x92 [..] > I'll investigate this error. I also see this panic: [ 3.558296] jh7110-crypto 16000000.crypto: will run requests pump with realtime priority [ 3.565961] dwmmc_starfive 16020000.mmc: Version ID is 290a [ 3.566016] dwmmc_starfive 16020000.mmc: DW MMC controller at irq 70,32 bit host data width,32 deep fifo [ 3.574329] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 3.577585] mmc_host mmc1: card is polling. [ 3.606327] Unable to handle kernel paging request at virtual address ffffffff800fab24 [ 3.820748] Oops [#1] [ 3.823027] Modules linked in: [ 3.826090] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 6.5.0zeha3-00072-g385eddf4e78f #6 [ 3.832229] mmc_host mmc1: Bus speed (slot 0) = 49500000Hz (slot req 400000Hz, actual 399193HZ div = 62) [ 3.835566] Hardware name: StarFive VisionFive 2 v1.2A (DT) [ 3.850595] epc : starfive_rsa_enc_core+0x30/0x116 [ 3.855402] ra : starfive_rsa_enc+0x5e/0xbc [ 3.859679] epc : ffffffff8086937a ra : ffffffff808694be sp : ffffffc800023910 [ 3.866898] gp : ffffffff81723980 tp : ffffffd8c0150000 t0 : ffffffd8c22380c8 [ 3.874117] t1 : 0000000000000000 t2 : 472f9351d07df710 s0 : ffffffc800023960 [ 3.881335] s1 : ffffffd8c013ea80 a0 : ffffffd8c013ea80 a1 : 0000000000000001 [ 3.888553] a2 : 0000010000000000 a3 : ffffffd8c0133c40 a4 : 0000000000000002 [ 3.895770] a5 : ffffffff800fab24 a6 : ffffffd8ff1d6d90 a7 : 0000000000000000 [ 3.902988] s2 : ffffffd8c013ea40 s3 : ffffffd8c2238180 s4 : 0000000000000001 [ 3.910206] s5 : ffffffd8c22380b0 s6 : ffffffd8c0133c40 s7 : 00000000000002a8 [ 3.917425] s8 : ffffffff8114c240 s9 : 000000001f030000 s10: 0000000000000001 [ 3.924642] s11: ffffffd8c0048300 t3 : 0a1255840a4b7df8 t4 : 28fc2f2b1f3b4e7d [ 3.931861] t5 : e2bb8080e13469b3 t6 : ffffffd8c2238440 [ 3.937170] status: 0000000200000120 badaddr: ffffffff800fab24 cause: 000000000000000f [ 3.945083] [<ffffffff8086937a>] starfive_rsa_enc_core+0x30/0x116 [ 3.951183] [<ffffffff808694be>] starfive_rsa_enc+0x5e/0xbc [ 3.956762] [<ffffffff8045edc4>] pkcs1pad_verify+0xb2/0xea [ 3.962256] [<ffffffff8045e21a>] crypto_sig_verify+0xa2/0xd0 [ 3.967919] [<ffffffff8047e8c0>] public_key_verify_signature+0x168/0x1d2 [ 3.974625] [<ffffffff80480018>] x509_check_for_self_signed+0x58/0xa0 [ 3.981071] [<ffffffff8047f486>] x509_cert_parse+0x148/0x19e [ 3.986735] [<ffffffff8047fd08>] x509_key_preparse+0x20/0x18c [ 3.992485] [<ffffffff8047d8b4>] asymmetric_key_preparse+0x52/0x86 [ 3.998668] [<ffffffff8044fcb8>] __key_create_or_update+0x16c/0x372 [ 4.004941] [<ffffffff8044fecc>] key_create_or_update+0xe/0x16 [ 4.010780] [<ffffffff8047fc78>] x509_load_certificate_list+0x86/0xf6 [ 4.017226] [<ffffffff80c3a59a>] regulatory_init_db+0x92/0x124 [ 4.023068] [<ffffffff800020f0>] do_one_initcall+0x38/0x17c [ 4.028646] [<ffffffff80c00f1c>] kernel_init_freeable+0x1a2/0x204 [ 4.034749] [<ffffffff80bb4b56>] kernel_init+0x1e/0x10a [ 4.039979] [<ffffffff8000336a>] ret_from_fork+0xa/0x1c [ 4.045218] Code: 0205 84aa 8a2e 000f 0140 3783 030b 4709 8793 4007 (c398) 2783 [ 4.052715] ---[ end trace 0000000000000000 ]--- [ 4.057339] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 4.064990] SMP: stopping secondary CPUs [ 4.068927] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]--- Maybe this can also be investigated. Thanks, Chris
