Set a more reasonable timeout for the rngc selftest. According to the reference manual, "The self test takes approximately 29,000 cycles to complete." With the rngc peripheral clock running at 66.5 MHz, this would be 436us. Let's use 1.5ms insteaf of 3sec for the timeout. Signed-off-by: Martin Kaiser <martin@xxxxxxxxx> --- v2: - adjust timeouts before we switch to polling drivers/char/hw_random/imx-rngc.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/char/hw_random/imx-rngc.c b/drivers/char/hw_random/imx-rngc.c index e4b385b01b11..6024c923b67d 100644 --- a/drivers/char/hw_random/imx-rngc.c +++ b/drivers/char/hw_random/imx-rngc.c @@ -53,6 +53,7 @@ #define RNGC_TIMEOUT 3000 /* 3 sec */ +#define RNGC_SELFTEST_TIMEOUT 1500 /* us */ static bool self_test = true; module_param(self_test, bool, 0); @@ -110,7 +111,8 @@ static int imx_rngc_self_test(struct imx_rngc *rngc) cmd = readl(rngc->base + RNGC_COMMAND); writel(cmd | RNGC_CMD_SELF_TEST, rngc->base + RNGC_COMMAND); - ret = wait_for_completion_timeout(&rngc->rng_op_done, msecs_to_jiffies(RNGC_TIMEOUT)); + ret = wait_for_completion_timeout(&rngc->rng_op_done, + usecs_to_jiffies(RNGC_SELFTEST_TIMEOUT)); imx_rngc_irq_mask_clear(rngc); if (!ret) return -ETIMEDOUT; -- 2.39.2