Re: [PATCH v7 07/11] arm64: dts: qcom: sm6115: Add Crypto Engine support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, May 20, 2023 at 03:18:09AM +0530, Bhupesh Sharma wrote:
> Add crypto engine (CE) and CE BAM related nodes and definitions to
> 'sm6115.dtsi'.
> 
> Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
> Tested-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
> Tested-by: Anders Roxell <anders.roxell@xxxxxxxxxx>
> Tested-by: Linux Kernel Functional Testing <lkft@xxxxxxxxxx>
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/sm6115.dtsi | 25 +++++++++++++++++++++++++
>  1 file changed, 25 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> index 631ca327e064..27ff42cf6066 100644
> --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> @@ -661,6 +661,31 @@ usb_hsphy: phy@1613000 {
>  			status = "disabled";
>  		};
>  
> +		cryptobam: dma-controller@1b04000 {
> +			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
> +			reg = <0x0 0x01b04000 0x0 0x24000>;
> +			interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
> +			#dma-cells = <1>;
> +			qcom,ee = <0>;
> +			qcom,controlled-remotely;
> +			num-channels = <8>;
> +			qcom,num-ees = <2>;

I would also add the RPM_SMD_CE1_CLK clock here and then omit
"num-channels" and "qcom,num-ees" (with [1]). It's not strictly
necessary but will guarantee that the clock is running whenever the BAM
is accessed (potentially avoiding crashes). And it seems to be the
typical approach so far, see e.g. sdm845. RPMH_CE_CLK is used on both
&cryptobam and &crypto there.

[1]: https://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine.git/commit/?id=8975dd41a9dbca3b47f7b8dac5bc4dfb23011000

Thanks,
Stephan



[Index of Archives]     [Kernel]     [Gnu Classpath]     [Gnu Crypto]     [DM Crypt]     [Netfilter]     [Bugtraq]
  Powered by Linux