Re: [PATCH V3 4/4] arm64: dts: qcom: ipq9574: Enable crypto nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 5/22/2023 2:23 PM, bhupesh.sharma@xxxxxxxxxx wrote:
On 5/18/23 7:41 PM, Anusha Rao <quic_anusha@xxxxxxxxxxx> wrote:
Enable crypto support for ipq9574.

Signed-off-by: Anusha Rao <quic_anusha@xxxxxxxxxxx>
---
  Changes in V3:
    - No change.

  arch/arm64/boot/dts/qcom/ipq9574.dtsi | 20 ++++++++++++++++++++
  1 file changed, 20 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
index fea15f3cf910..6e52d35a6a15 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
@@ -123,6 +123,26 @@
              clock-names = "core";
          };
  +        cryptobam: dma-controller@704000 {
+            compatible = "qcom,bam-v1.7.0";

Please confirm if this is "qcom,bam-v1.7.4" or "qcom,bam-v1.7.0". If "qcom,bam-v1.7.4" please use the newer compatible format.
Sure, will update.

Thanks,
Anusha

Thanks,
Bhupesh

+            reg = <0x00704000 0x20000>;
+            interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
+            #dma-cells = <1>;
+            qcom,ee = <1>;
+            qcom,controlled-remotely;
+        };
+
+        crypto: crypto@73a000 {
+            compatible = "qcom,ipq9574-qce", "qcom,ipq4019-qce", "qcom,qce";
+            reg = <0x0073a000 0x6000>;
+            clocks = <&gcc GCC_CRYPTO_AHB_CLK>,
+                 <&gcc GCC_CRYPTO_AXI_CLK>,
+                 <&gcc GCC_CRYPTO_CLK>;
+            clock-names = "iface", "bus", "core";
+            dmas = <&cryptobam 2>, <&cryptobam 3>;
+            dma-names = "rx", "tx";
+        };
+
          tlmm: pinctrl@1000000 {
              compatible = "qcom,ipq9574-tlmm";
              reg = <0x01000000 0x300000>;





[Index of Archives]     [Kernel]     [Gnu Classpath]     [Gnu Crypto]     [DM Crypt]     [Netfilter]     [Bugtraq]
  Powered by Linux