Thanks for the review and sorry it took me a while to respond. >> +config CRYPTO_LEA_AVX2 >> + tristate "Ciphers: LEA with modes: ECB, CBC, CTR, XTS >> (SSE2/MOVBE/AVX2)" >> + select CRYPTO_LEA >> + imply CRYPTO_XTS >> + imply CRYPTO_CTR >> + help >> + LEA cipher algorithm (KS X 3246, ISO/IEC 29192-2:2019) >> + >> + LEA is one of the standard cryptographic alorithms of >> + the Republic of Korea. It consists of four 32bit word. > The "four 32bit word" thing is probably not a detail end users care about enough to see in Kconfig text. I am in the process of re-implementing it for LEA cipher and will try to improve the description. >> + See: >> + https://seed.kisa.or.kr/kisa/algorithm/EgovLeaInfo.do >> + >> + Architecture: x86_64 using: >> + - SSE2 (Streaming SIMD Extensions 2) >> + - MOVBE (Move Data After Swapping Bytes) >> + - AVX2 (Advanced Vector Extensions) > >What about i386? If this is truly 64-bit-only for some reason, it's not reflected anywhere that I can see, like having a: > > depends on X86_64 > >I'm also a _bit_ confused why this has one config option called "_AVX2" >but that also includes the SSE2 implementation. As you mentioned, the SIMD optimizations used in this implementation are also applicable on i386. The initial support target was for x86_64 environments where AVX2 instructions are available, so we ended up with an awkward support target, which may need to be changed. Internally, there is an implementation for i386, and I'll include it in the submission. The LEA 4-way SIMD implementation can be done purely using SSE2 commands, but it can also be done a bit faster using `vpunpckldq` (AVX), `vpbroadcast` (AVX2), `vpxor` (AVX), etc. In this implementation, 4-way encryption is not possible without AVX2. If a future SSE2 implementation were to be added, it would be possible to include both a 4-way implementation with SSE2 and a 4-way implementation with AVX2. >> +struct lea_xts_ctx { >> + u8 raw_crypt_ctx[sizeof(struct crypto_lea_ctx)] SIMD_ALIGN_ATTR; >> + u8 raw_tweak_ctx[sizeof(struct crypto_lea_ctx)] SIMD_ALIGN_ATTR; }; > >The typing here is a bit goofy. What's wrong with: > >struct lea_xts_ctx { > struct crypto_lea_ctx crypt_ctx SIMD_ALIGN_ATTR; > struct crypto_lea_ctx lea_ctx SIMD_ALIGN_ATTR; >}; > >? You end up with the same sized structure but you don't have to cast it as much. This is a mistake I made by just bringing in other code without much thought. I'll fix it. >> +struct _lea_u128 { >> + u64 v0, v1; >> +}; >> + >> +static inline void xor_1blk(u8 *out, const u8 *in1, const u8 *in2) { >> + const struct _lea_u128 *_in1 = (const struct _lea_u128 *)in1; >> + const struct _lea_u128 *_in2 = (const struct _lea_u128 *)in2; >> + struct _lea_u128 *_out = (struct _lea_u128 *)out; >> + >> + _out->v0 = _in1->v0 ^ _in2->v0; >> + _out->v1 = _in1->v1 ^ _in2->v1; >> +} >> + >> +static inline void xts_next_tweak(u8 *out, const u8 *in) { >> + const u64 *_in = (const u64 *)in; >> + u64 *_out = (u64 *)out; >> + u64 v0 = _in[0]; >> + u64 v1 = _in[1]; >> + u64 carry = (u64)(((s64)v1) >> 63); >> + >> + v1 = (v1 << 1) ^ (v0 >> 63); >> + v0 = (v0 << 1) ^ ((u64)carry & 0x87); >> + >> + _out[0] = v0; >> + _out[1] = v1; >> +} > >I don't really care either way, but it's interesting that in two adjacent functions this deals with two adjacent 64-bit values. In one it defines a structure with two u64's and in the next it treats it as an array. I'll unify them in one way. >> +static int xts_encrypt_8way(struct skcipher_request *req) { >... > >It's kinda a shame that there isn't more code shared here between, for instance the 4way and 8way functions. But I guess this crypto code tends to be merged and then very rarely fixed up after. This is a mistake in implementation: as I mentioned, the code I submitted also requires AVX2 for the 4-way implementation, so this is unnecessary duplication. I will add a proper SSE2 4-way implementation by sharing the code with the 8-way. >> +static int xts_lea_set_key(struct crypto_skcipher *tfm, const u8 *key, >> + u32 keylen) >> +{ >> + struct crypto_tfm *tfm_ctx = crypto_skcipher_ctx(tfm); >> + struct lea_xts_ctx *ctx = crypto_tfm_ctx(tfm_ctx); >> + >> + struct crypto_lea_ctx *crypt_key = >> + (struct crypto_lea_ctx *)(ctx->raw_crypt_ctx); >> + struct crypto_lea_ctx *tweak_key = >> + (struct crypto_lea_ctx *)(ctx->raw_tweak_ctx); > >These were those goofy casts that can go away if the typing is a bit more careful I'll fix it by redefining `struct lea_xts_ctx`. >> +static struct simd_skcipher_alg >> *lea_simd_algs[ARRAY_SIZE(lea_simd_avx2_algs)]; >> + >> +static int __init crypto_lea_avx2_init(void) { >> + const char *feature_name; >> + >> + if (!boot_cpu_has(X86_FEATURE_XMM2)) { >> + pr_info("SSE2 instructions are not detected.\n"); >> + return -ENODEV; >> + } >> + >> + if (!boot_cpu_has(X86_FEATURE_MOVBE)) { >> + pr_info("MOVBE instructions are not detected.\n"); >> + return -ENODEV; >> + } >> + >> + if (!boot_cpu_has(X86_FEATURE_AVX2) || >> +!boot_cpu_has(X86_FEATURE_AVX)) >> { >> + pr_info("AVX2 instructions are not detected.\n"); >> + return -ENODEV; >> + } >> + >> + if (!cpu_has_xfeatures(XFEATURE_MASK_SSE | XFEATURE_MASK_YMM, >> + &feature_name)) { >> + pr_info("CPU feature '%s' is not supported.\n", feature_name); >> + return -ENODEV; >> + } > >This looks suspect. > >It requires that *ALL* of XMM2, MOVBE, AVX, AVX2 and XSAVE support for >*ANY* of these to be used. In other cipher code that I've seen, it separates out the AVX/YMM acceleration from the pure SSE2/XMM acceleration functions so that CPUs with only SSE2 can still benefit. > >Either this is wrong, or there is something subtle going on that I'm missing. This is a mistake, as the initial support was implemented for x86_64 environments with AVX2 instructions. Since there are already implementations that support i386 and x86_64, SSE2, SSE2 and MOVBE, and AVX2 each independently, I will change it to support the various environments in the next version. Thank you. -----Original Message----- From: Dave Hansen <dave.hansen@xxxxxxxxx> Sent: Saturday, April 29, 2023 12:55 AM To: Dongsoo Lee <letrhee@xxxxxxxxx>; linux-crypto@xxxxxxxxxxxxxxx Cc: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>; David S. Miller <davem@xxxxxxxxxxxxx>; Thomas Gleixner <tglx@xxxxxxxxxxxxx>; Ingo Molnar <mingo@xxxxxxxxxx>; Borislav Petkov <bp@xxxxxxxxx>; Dave Hansen <dave.hansen@xxxxxxxxxxxxxxx>; x86@xxxxxxxxxx; H. Peter Anvin <hpa@xxxxxxxxx>; linux-kernel@xxxxxxxxxxxxxxx; David S. Miller <abc@xxxxxxxxxxxxxx>; Dongsoo Lee <letrhee@xxxxxxxxx> Subject: Re: [PATCH 3/3] crypto: LEA block cipher AVX2 optimization > +config CRYPTO_LEA_AVX2 > + tristate "Ciphers: LEA with modes: ECB, CBC, CTR, XTS > (SSE2/MOVBE/AVX2)" > + select CRYPTO_LEA > + imply CRYPTO_XTS > + imply CRYPTO_CTR > + help > + LEA cipher algorithm (KS X 3246, ISO/IEC 29192-2:2019) > + > + LEA is one of the standard cryptographic alorithms of > + the Republic of Korea. It consists of four 32bit word. The "four 32bit word" thing is probably not a detail end users care about enough to see in Kconfig text. > + See: > + https://seed.kisa.or.kr/kisa/algorithm/EgovLeaInfo.do > + > + Architecture: x86_64 using: > + - SSE2 (Streaming SIMD Extensions 2) > + - MOVBE (Move Data After Swapping Bytes) > + - AVX2 (Advanced Vector Extensions) What about i386? If this is truly 64-bit-only for some reason, it's not reflected anywhere that I can see, like having a: depends on X86_64 I'm also a _bit_ confused why this has one config option called "_AVX2" but that also includes the SSE2 implementation. > + Processes 4(SSE2), 8(AVX2) blocks in parallel. > + In CTR mode, the MOVBE instruction is utilized for improved > performance. > + > config CRYPTO_CHACHA20_X86_64 > tristate "Ciphers: ChaCha20, XChaCha20, XChaCha12 > (SSSE3/AVX2/AVX-512VL)" > depends on X86 && 64BIT > diff --git a/arch/x86/crypto/Makefile b/arch/x86/crypto/Makefile index > 9aa46093c91b..de23293b88df 100644 > --- a/arch/x86/crypto/Makefile > +++ b/arch/x86/crypto/Makefile > @@ -109,6 +109,9 @@ aria-aesni-avx2-x86_64-y := > aria-aesni-avx2-asm_64.o aria_aesni_avx2_glue.o > obj-$(CONFIG_CRYPTO_ARIA_GFNI_AVX512_X86_64) += > aria-gfni-avx512-x86_64.o aria-gfni-avx512-x86_64-y := > aria-gfni-avx512-asm_64.o aria_gfni_avx512_glue.o > > +obj-$(CONFIG_CRYPTO_LEA_AVX2) += lea-avx2-x86_64.o lea-avx2-x86_64-y > +:= lea_avx2_x86_64-asm.o lea_avx2_glue.o > + > quiet_cmd_perlasm = PERLASM $@ > cmd_perlasm = $(PERL) $< > $@ > $(obj)/%.S: $(src)/%.pl FORCE > diff --git a/arch/x86/crypto/lea_avx2_glue.c > b/arch/x86/crypto/lea_avx2_glue.c new file mode 100644 index > 000000000000..532958d3caa5 > --- /dev/null > +++ b/arch/x86/crypto/lea_avx2_glue.c > @@ -0,0 +1,1112 @@ > +// SPDX-License-Identifier: GPL-2.0-or-later > +/* > + * Glue Code for the SSE2/MOVBE/AVX2 assembler instructions for the > +LEA > Cipher > + * > + * Copyright (c) 2023 National Security Research. > + * Author: Dongsoo Lee <letrhee@xxxxxxxxx> */ > + > +#include <asm/simd.h> > +#include <asm/unaligned.h> > +#include <crypto/algapi.h> > +#include <crypto/ctr.h> > +#include <crypto/internal/simd.h> > +#include <crypto/scatterwalk.h> > +#include <crypto/skcipher.h> > +#include <crypto/internal/skcipher.h> #include <linux/err.h> #include > +<linux/module.h> #include <linux/types.h> > + > +#include <crypto/lea.h> > +#include <crypto/xts.h> > +#include "ecb_cbc_helpers.h" > + > +#define SIMD_KEY_ALIGN 16 > +#define SIMD_ALIGN_ATTR __aligned(SIMD_KEY_ALIGN) > + > +struct lea_xts_ctx { > + u8 raw_crypt_ctx[sizeof(struct crypto_lea_ctx)] SIMD_ALIGN_ATTR; > + u8 raw_tweak_ctx[sizeof(struct crypto_lea_ctx)] SIMD_ALIGN_ATTR; }; The typing here is a bit goofy. What's wrong with: struct lea_xts_ctx { struct crypto_lea_ctx crypt_ctx SIMD_ALIGN_ATTR; struct crypto_lea_ctx lea_ctx SIMD_ALIGN_ATTR; }; ? You end up with the same sized structure but you don't have to cast it as much. > +struct _lea_u128 { > + u64 v0, v1; > +}; > + > +static inline void xor_1blk(u8 *out, const u8 *in1, const u8 *in2) { > + const struct _lea_u128 *_in1 = (const struct _lea_u128 *)in1; > + const struct _lea_u128 *_in2 = (const struct _lea_u128 *)in2; > + struct _lea_u128 *_out = (struct _lea_u128 *)out; > + > + _out->v0 = _in1->v0 ^ _in2->v0; > + _out->v1 = _in1->v1 ^ _in2->v1; > +} > + > +static inline void xts_next_tweak(u8 *out, const u8 *in) { > + const u64 *_in = (const u64 *)in; > + u64 *_out = (u64 *)out; > + u64 v0 = _in[0]; > + u64 v1 = _in[1]; > + u64 carry = (u64)(((s64)v1) >> 63); > + > + v1 = (v1 << 1) ^ (v0 >> 63); > + v0 = (v0 << 1) ^ ((u64)carry & 0x87); > + > + _out[0] = v0; > + _out[1] = v1; > +} I don't really care either way, but it's interesting that in two adjacent functions this deals with two adjacent 64-bit values. In one it defines a structure with two u64's and in the next it treats it as an array. > +static int xts_encrypt_8way(struct skcipher_request *req) { ... It's kinda a shame that there isn't more code shared here between, for instance the 4way and 8way functions. But I guess this crypto code tends to be merged and then very rarely fixed up after. > +static int xts_lea_set_key(struct crypto_skcipher *tfm, const u8 *key, > + u32 keylen) > +{ > + struct crypto_tfm *tfm_ctx = crypto_skcipher_ctx(tfm); > + struct lea_xts_ctx *ctx = crypto_tfm_ctx(tfm_ctx); > + > + struct crypto_lea_ctx *crypt_key = > + (struct crypto_lea_ctx *)(ctx->raw_crypt_ctx); > + struct crypto_lea_ctx *tweak_key = > + (struct crypto_lea_ctx *)(ctx->raw_tweak_ctx); These were those goofy casts that can go away if the typing is a bit more careful ... > +static struct simd_skcipher_alg > *lea_simd_algs[ARRAY_SIZE(lea_simd_avx2_algs)]; > + > +static int __init crypto_lea_avx2_init(void) { > + const char *feature_name; > + > + if (!boot_cpu_has(X86_FEATURE_XMM2)) { > + pr_info("SSE2 instructions are not detected.\n"); > + return -ENODEV; > + } > + > + if (!boot_cpu_has(X86_FEATURE_MOVBE)) { > + pr_info("MOVBE instructions are not detected.\n"); > + return -ENODEV; > + } > + > + if (!boot_cpu_has(X86_FEATURE_AVX2) || > +!boot_cpu_has(X86_FEATURE_AVX)) > { > + pr_info("AVX2 instructions are not detected.\n"); > + return -ENODEV; > + } > + > + if (!cpu_has_xfeatures(XFEATURE_MASK_SSE | XFEATURE_MASK_YMM, > + &feature_name)) { > + pr_info("CPU feature '%s' is not supported.\n", feature_name); > + return -ENODEV; > + } This looks suspect. It requires that *ALL* of XMM2, MOVBE, AVX, AVX2 and XSAVE support for *ANY* of these to be used. In other cipher code that I've seen, it separates out the AVX/YMM acceleration from the pure SSE2/XMM acceleration functions so that CPUs with only SSE2 can still benefit. Either this is wrong, or there is something subtle going on that I'm missing.