Re: [PATCH v6 3/6] soc: qcom: Make the Qualcomm UFS/SDCC ICE a dedicated driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Apr 07, 2023 at 01:50:26PM +0300, Abel Vesa wrote:
> This takes the already existing duplicated support in both ufs-qcom
> and sdhci-msm drivers and makes it a dedicated driver that can be used
> by both mentioned drivers.
> 
> The reason for this is because, staring with SM8550, the ICE IP block
> is shared between UFS and SDCC, which means we need to probe a dedicated
> device and share it between those two consumers.
> 
> So let's add the ICE dedicated driver as a soc driver.
> 
> Platforms that already have ICE supported, will use it as a library
> as the of_qcom_ice_get will return an ICE instance created for the
> consumer device. This allows the backwards compatibility with old-style
> devicetree approach.
> 
> Also, add support to HW version 4.x since it works out-of-the-box with
> the current driver. The 4.x HW version is found on SM8550 platform.
> 
> Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx>

Reviewed-by: Bjorn Andersson <andersson@xxxxxxxxxx>

Regards,
Bjorn

> ---
> 
> The v5 is here:
> https://lore.kernel.org/all/20230403200530.2103099-4-abel.vesa@xxxxxxxxxx/
> 
> Changes since v5:
>  * Reworded the commit message to split it into several paragraphs
>  * Added missing platform_device_put on device link creation failure
> 
> Changes since v4:
>  * mentioned the addition of the 4.x HW version in the commit message
>  * dropped np member from qcom_ice
>  * made the error message from qcom_ice_wait_bist_status a single line
>  * dropped clock enable call from qcom_ice_enable
>  * changed comment in qcom_ice_program_key above the byte swap according
>    to Bjorn's suggestion
>  * made the qcom_ice_create function prototype a two-liner
>  * changed the first argument of qcom_ice_create to simply device
>  * added support for the legacy DT clocks name
>  * changed the dev_info to dev_dbg in qcom_ice_create
>  * added kernel doc above of_qcom_ice_get
>  * made the comments in of_qcom_ice_get more explicit about how the
>    legacy and the qcom,ice approach are handled
>  * changed the error message on getting the ICE instance failure
>  * added devlink between the consumer and the ICE instance in order to
>    make sure the supplier doesn't get unbinded/removed from under the
>    consumer
>  * replace tab with space on the compatible line in the match table
> 
> Changes since v3:
>  * dropped the "QCOM ICE v2.X only" comment
>  * dropped question mark after "built-in self-test"
>  * dropped comment above qcom_ice_check_supported implementation
>  * allowed major version 4 as well, found on SM8550
>  * renamed "enable" argument of __qcom_ice_enable to "enable_optimizations"
>  * moved qcom_ice_enable implementation above qcom_ice_resume
>  * initialized dev in qcom_ice_program_key and dropped assignment below
>  * in ice.h, included types.h instead of err.h
>  * in ice.h, dropped the #if IS_ENABLED(CONFIG_QCOM_INLINE_CRYPTO_ENGINE)
>  * in ice.h, moved of_qcom_ice_get below qcom_ice_evict_key
> 
> Changes since v2:
>  * reorganized the probe and of_qcom_ice_get to allow support for dts
>    legacy approach
>  * added suspend API to allow disabling the core clock when not in use
>  * reworded the commit message to mention the way the legacy dts approach
>    is supported
>  * made the qcom_ice definition private to the driver
> 
> Changes since v1:
>  * renamed filename to simply ice.c
>  * kept all the copyrights from UFS and SDHC drivers
>  * Used GENMASK like Konrad suggested
>  * Fixed the comment about "ICE instance is supported currently",
>    like Konrad suggested
>  * Used FIELD_GET
>  * Dropped extra comment from qcom_ice_low_power_mode_enable
>  * Used lowercase in hex values
>  * Dropped double space from comment above the qcom_ice_program_key
>    function
>  * Changed the dev_info about engine being registered to dev_dbg
>  * Made the compatible entry in the match table a single line
>  * Made the qcom_ice_driver definition consistent with respect to
>    spaces/tabs
>  * Switched QCOM_INLINE_CRYPTO_ENGINE to tristate and made it built-in
>    if any of the UFS or the SDHC drivers are built-in. This is to allow
>    the API to be available even if the built-in driver doesn't have
>    crypto enabled.
>  * Dropped the engine container state. The of_qcom_ice_get will look up
>    the ICE device based on the phandle and get the ICE data from dev
>    data.
>  * Dropped the supported field from qcom_ice definition.
>  * Marked all funtions that are local as static.
>  * Replaced qcom_ice_wait_bist_status function implementation with the
>    one dropped from sdhci-msm.c
>  * Added a separate function for key eviction
> 
> 
>  drivers/soc/qcom/Kconfig  |   4 +
>  drivers/soc/qcom/Makefile |   1 +
>  drivers/soc/qcom/ice.c    | 366 ++++++++++++++++++++++++++++++++++++++
>  include/soc/qcom/ice.h    |  37 ++++
>  4 files changed, 408 insertions(+)
>  create mode 100644 drivers/soc/qcom/ice.c
>  create mode 100644 include/soc/qcom/ice.h
> 
> diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
> index a25df9e3c70e..a491718f8064 100644
> --- a/drivers/soc/qcom/Kconfig
> +++ b/drivers/soc/qcom/Kconfig
> @@ -275,4 +275,8 @@ config QCOM_ICC_BWMON
>  	  the fixed bandwidth votes from cpufreq (CPU nodes) thus achieve high
>  	  memory throughput even with lower CPU frequencies.
>  
> +config QCOM_INLINE_CRYPTO_ENGINE
> +	tristate
> +	select QCOM_SCM
> +
>  endmenu
> diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
> index 6e88da899f60..0f43a88b4894 100644
> --- a/drivers/soc/qcom/Makefile
> +++ b/drivers/soc/qcom/Makefile
> @@ -32,3 +32,4 @@ obj-$(CONFIG_QCOM_RPMHPD) += rpmhpd.o
>  obj-$(CONFIG_QCOM_RPMPD) += rpmpd.o
>  obj-$(CONFIG_QCOM_KRYO_L2_ACCESSORS) +=	kryo-l2-accessors.o
>  obj-$(CONFIG_QCOM_ICC_BWMON)	+= icc-bwmon.o
> +obj-$(CONFIG_QCOM_INLINE_CRYPTO_ENGINE)	+= ice.o
> diff --git a/drivers/soc/qcom/ice.c b/drivers/soc/qcom/ice.c
> new file mode 100644
> index 000000000000..a6123ea96272
> --- /dev/null
> +++ b/drivers/soc/qcom/ice.c
> @@ -0,0 +1,366 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Qualcomm ICE (Inline Crypto Engine) support.
> + *
> + * Copyright (c) 2013-2019, The Linux Foundation. All rights reserved.
> + * Copyright (c) 2019, Google LLC
> + * Copyright (c) 2023, Linaro Limited
> + */
> +
> +#include <linux/bitfield.h>
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/iopoll.h>
> +#include <linux/of_platform.h>
> +
> +#include <linux/firmware/qcom/qcom_scm.h>
> +
> +#include <soc/qcom/ice.h>
> +
> +#define AES_256_XTS_KEY_SIZE			64
> +
> +/* QCOM ICE registers */
> +#define QCOM_ICE_REG_VERSION			0x0008
> +#define QCOM_ICE_REG_FUSE_SETTING		0x0010
> +#define QCOM_ICE_REG_BIST_STATUS		0x0070
> +#define QCOM_ICE_REG_ADVANCED_CONTROL		0x1000
> +
> +/* BIST ("built-in self-test") status flags */
> +#define QCOM_ICE_BIST_STATUS_MASK		GENMASK(31, 28)
> +
> +#define QCOM_ICE_FUSE_SETTING_MASK		0x1
> +#define QCOM_ICE_FORCE_HW_KEY0_SETTING_MASK	0x2
> +#define QCOM_ICE_FORCE_HW_KEY1_SETTING_MASK	0x4
> +
> +#define qcom_ice_writel(engine, val, reg)	\
> +	writel((val), (engine)->base + (reg))
> +
> +#define qcom_ice_readl(engine, reg)	\
> +	readl((engine)->base + (reg))
> +
> +struct qcom_ice {
> +	struct device *dev;
> +	void __iomem *base;
> +	struct device_link *link;
> +
> +	struct clk *core_clk;
> +};
> +
> +static bool qcom_ice_check_supported(struct qcom_ice *ice)
> +{
> +	u32 regval = qcom_ice_readl(ice, QCOM_ICE_REG_VERSION);
> +	struct device *dev = ice->dev;
> +	int major = FIELD_GET(GENMASK(31, 24), regval);
> +	int minor = FIELD_GET(GENMASK(23, 16), regval);
> +	int step = FIELD_GET(GENMASK(15, 0), regval);
> +
> +	/* For now this driver only supports ICE version 3 and 4. */
> +	if (major != 3 && major != 4) {
> +		dev_warn(dev, "Unsupported ICE version: v%d.%d.%d\n",
> +			 major, minor, step);
> +		return false;
> +	}
> +
> +	dev_info(dev, "Found QC Inline Crypto Engine (ICE) v%d.%d.%d\n",
> +		 major, minor, step);
> +
> +	/* If fuses are blown, ICE might not work in the standard way. */
> +	regval = qcom_ice_readl(ice, QCOM_ICE_REG_FUSE_SETTING);
> +	if (regval & (QCOM_ICE_FUSE_SETTING_MASK |
> +		      QCOM_ICE_FORCE_HW_KEY0_SETTING_MASK |
> +		      QCOM_ICE_FORCE_HW_KEY1_SETTING_MASK)) {
> +		dev_warn(dev, "Fuses are blown; ICE is unusable!\n");
> +		return false;
> +	}
> +
> +	return true;
> +}
> +
> +static void qcom_ice_low_power_mode_enable(struct qcom_ice *ice)
> +{
> +	u32 regval;
> +
> +	regval = qcom_ice_readl(ice, QCOM_ICE_REG_ADVANCED_CONTROL);
> +
> +	/* Enable low power mode sequence */
> +	regval |= 0x7000;
> +	qcom_ice_writel(ice, regval, QCOM_ICE_REG_ADVANCED_CONTROL);
> +}
> +
> +static void qcom_ice_optimization_enable(struct qcom_ice *ice)
> +{
> +	u32 regval;
> +
> +	/* ICE Optimizations Enable Sequence */
> +	regval = qcom_ice_readl(ice, QCOM_ICE_REG_ADVANCED_CONTROL);
> +	regval |= 0xd807100;
> +	/* ICE HPG requires delay before writing */
> +	udelay(5);
> +	qcom_ice_writel(ice, regval, QCOM_ICE_REG_ADVANCED_CONTROL);
> +	udelay(5);
> +}
> +
> +/*
> + * Wait until the ICE BIST (built-in self-test) has completed.
> + *
> + * This may be necessary before ICE can be used.
> + * Note that we don't really care whether the BIST passed or failed;
> + * we really just want to make sure that it isn't still running. This is
> + * because (a) the BIST is a FIPS compliance thing that never fails in
> + * practice, (b) ICE is documented to reject crypto requests if the BIST
> + * fails, so we needn't do it in software too, and (c) properly testing
> + * storage encryption requires testing the full storage stack anyway,
> + * and not relying on hardware-level self-tests.
> + */
> +static int qcom_ice_wait_bist_status(struct qcom_ice *ice)
> +{
> +	u32 regval;
> +	int err;
> +
> +	err = readl_poll_timeout(ice->base + QCOM_ICE_REG_BIST_STATUS,
> +				 regval, !(regval & QCOM_ICE_BIST_STATUS_MASK),
> +				 50, 5000);
> +	if (err)
> +		dev_err(ice->dev, "Timed out waiting for ICE self-test to complete\n");
> +
> +	return err;
> +}
> +
> +int qcom_ice_enable(struct qcom_ice *ice)
> +{
> +	qcom_ice_low_power_mode_enable(ice);
> +	qcom_ice_optimization_enable(ice);
> +
> +	return qcom_ice_wait_bist_status(ice);
> +}
> +EXPORT_SYMBOL_GPL(qcom_ice_enable);
> +
> +int qcom_ice_resume(struct qcom_ice *ice)
> +{
> +	struct device *dev = ice->dev;
> +	int err;
> +
> +	err = clk_prepare_enable(ice->core_clk);
> +	if (err) {
> +		dev_err(dev, "failed to enable core clock (%d)\n",
> +			err);
> +		return err;
> +	}
> +
> +	return qcom_ice_wait_bist_status(ice);
> +}
> +EXPORT_SYMBOL_GPL(qcom_ice_resume);
> +
> +int qcom_ice_suspend(struct qcom_ice *ice)
> +{
> +	clk_disable_unprepare(ice->core_clk);
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL_GPL(qcom_ice_suspend);
> +
> +int qcom_ice_program_key(struct qcom_ice *ice,
> +			 u8 algorithm_id, u8 key_size,
> +			 const u8 crypto_key[], u8 data_unit_size,
> +			 int slot)
> +{
> +	struct device *dev = ice->dev;
> +	union {
> +		u8 bytes[AES_256_XTS_KEY_SIZE];
> +		u32 words[AES_256_XTS_KEY_SIZE / sizeof(u32)];
> +	} key;
> +	int i;
> +	int err;
> +
> +	/* Only AES-256-XTS has been tested so far. */
> +	if (algorithm_id != QCOM_ICE_CRYPTO_ALG_AES_XTS ||
> +	    key_size != QCOM_ICE_CRYPTO_KEY_SIZE_256) {
> +		dev_err_ratelimited(dev,
> +				    "Unhandled crypto capability; algorithm_id=%d, key_size=%d\n",
> +				    algorithm_id, key_size);
> +		return -EINVAL;
> +	}
> +
> +	memcpy(key.bytes, crypto_key, AES_256_XTS_KEY_SIZE);
> +
> +	/* The SCM call requires that the key words are encoded in big endian */
> +	for (i = 0; i < ARRAY_SIZE(key.words); i++)
> +		__cpu_to_be32s(&key.words[i]);
> +
> +	err = qcom_scm_ice_set_key(slot, key.bytes, AES_256_XTS_KEY_SIZE,
> +				   QCOM_SCM_ICE_CIPHER_AES_256_XTS,
> +				   data_unit_size);
> +
> +	memzero_explicit(&key, sizeof(key));
> +
> +	return err;
> +}
> +EXPORT_SYMBOL_GPL(qcom_ice_program_key);
> +
> +int qcom_ice_evict_key(struct qcom_ice *ice, int slot)
> +{
> +	return qcom_scm_ice_invalidate_key(slot);
> +}
> +EXPORT_SYMBOL_GPL(qcom_ice_evict_key);
> +
> +static struct qcom_ice *qcom_ice_create(struct device *dev,
> +					void __iomem *base)
> +{
> +	struct qcom_ice *engine;
> +
> +	if (!qcom_scm_is_available())
> +		return ERR_PTR(-EPROBE_DEFER);
> +
> +	if (!qcom_scm_ice_available()) {
> +		dev_warn(dev, "ICE SCM interface not found\n");
> +		return NULL;
> +	}
> +
> +	engine = devm_kzalloc(dev, sizeof(*engine), GFP_KERNEL);
> +	if (!engine)
> +		return ERR_PTR(-ENOMEM);
> +
> +	engine->dev = dev;
> +	engine->base = base;
> +
> +	/*
> +	 * Legacy DT binding uses different clk names for each consumer,
> +	 * so lets try those first. If none of those are a match, it means
> +	 * the we only have one clock and it is part of the dedicated DT node.
> +	 * Also, enable the clock before we check what HW version the driver
> +	 * supports.
> +	 */
> +	engine->core_clk = devm_clk_get_optional_enabled(dev, "ice_core_clk");
> +	if (!engine->core_clk)
> +		engine->core_clk = devm_clk_get_optional_enabled(dev, "ice");
> +	if (!engine->core_clk)
> +		engine->core_clk = devm_clk_get_enabled(dev, NULL);
> +	if (IS_ERR(engine->core_clk))
> +		return ERR_CAST(engine->core_clk);
> +
> +	if (!qcom_ice_check_supported(engine))
> +		return ERR_PTR(-EOPNOTSUPP);
> +
> +	dev_dbg(dev, "Registered Qualcomm Inline Crypto Engine\n");
> +
> +	return engine;
> +}
> +
> +/**
> + * of_qcom_ice_get() - get an ICE instance from a DT node
> + * @dev: device pointer for the consumer device
> + *
> + * This function will provide an ICE instance either by creating one for the
> + * consumer device if its DT node provides the 'ice' reg range and the 'ice'
> + * clock (for legacy DT style). On the other hand, if consumer provides a
> + * phandle via 'qcom,ice' property to an ICE DT, the ICE instance will already
> + * be created and so this function will return that instead.
> + *
> + * Return: ICE pointer on success, NULL if there is no ICE data provided by the
> + * consumer or ERR_PTR() on error.
> + */
> +struct qcom_ice *of_qcom_ice_get(struct device *dev)
> +{
> +	struct platform_device *pdev = to_platform_device(dev);
> +	struct qcom_ice *ice;
> +	struct device_node *node;
> +	struct resource *res;
> +	void __iomem *base;
> +
> +	if (!dev || !dev->of_node)
> +		return ERR_PTR(-ENODEV);
> +
> +	/*
> +	 * In order to support legacy style devicetree bindings, we need
> +	 * to create the ICE instance using the consumer device and the reg
> +	 * range called 'ice' it provides.
> +	 */
> +	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ice");
> +	if (res) {
> +		base = devm_ioremap_resource(&pdev->dev, res);
> +		if (IS_ERR(base))
> +			return ERR_CAST(base);
> +
> +		/* create ICE instance using consumer dev */
> +		return qcom_ice_create(&pdev->dev, base);
> +	}
> +
> +	/*
> +	 * If the consumer node does not provider an 'ice' reg range
> +	 * (legacy DT binding), then it must at least provide a phandle
> +	 * to the ICE devicetree node, otherwise ICE is not supported.
> +	 */
> +	node = of_parse_phandle(dev->of_node, "qcom,ice", 0);
> +	if (!node)
> +		return NULL;
> +
> +	pdev = of_find_device_by_node(node);
> +	if (!pdev) {
> +		dev_err(dev, "Cannot find device node %s\n", node->name);
> +		ice = ERR_PTR(-EPROBE_DEFER);
> +		goto out;
> +	}
> +
> +	ice = platform_get_drvdata(pdev);
> +	if (!ice) {
> +		dev_err(dev, "Cannot get ice instance from %s\n",
> +			dev_name(&pdev->dev));
> +		platform_device_put(pdev);
> +		ice = ERR_PTR(-EPROBE_DEFER);
> +		goto out;
> +	}
> +
> +	ice->link = device_link_add(dev, &pdev->dev, DL_FLAG_AUTOREMOVE_SUPPLIER);
> +	if (!ice->link) {
> +		dev_err(&pdev->dev,
> +			"Failed to create device link to consumer %s\n",
> +			dev_name(dev));
> +		platform_device_put(pdev);
> +		ice = ERR_PTR(-EINVAL);
> +	}
> +
> +out:
> +	of_node_put(node);
> +
> +	return ice;
> +}
> +EXPORT_SYMBOL_GPL(of_qcom_ice_get);
> +
> +static int qcom_ice_probe(struct platform_device *pdev)
> +{
> +	struct qcom_ice *engine;
> +	void __iomem *base;
> +
> +	base = devm_platform_ioremap_resource(pdev, 0);
> +	if (IS_ERR(base)) {
> +		dev_warn(&pdev->dev, "ICE registers not found\n");
> +		return PTR_ERR(base);
> +	}
> +
> +	engine = qcom_ice_create(&pdev->dev, base);
> +	if (IS_ERR(engine))
> +		return PTR_ERR(engine);
> +
> +	platform_set_drvdata(pdev, engine);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id qcom_ice_of_match_table[] = {
> +	{ .compatible = "qcom,inline-crypto-engine" },
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(of, qcom_ice_of_match_table);
> +
> +static struct platform_driver qcom_ice_driver = {
> +	.probe	= qcom_ice_probe,
> +	.driver = {
> +		.name = "qcom-ice",
> +		.of_match_table = qcom_ice_of_match_table,
> +	},
> +};
> +
> +module_platform_driver(qcom_ice_driver);
> +
> +MODULE_DESCRIPTION("Qualcomm Inline Crypto Engine driver");
> +MODULE_LICENSE("GPL");
> diff --git a/include/soc/qcom/ice.h b/include/soc/qcom/ice.h
> new file mode 100644
> index 000000000000..5870a94599a2
> --- /dev/null
> +++ b/include/soc/qcom/ice.h
> @@ -0,0 +1,37 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (c) 2023, Linaro Limited
> + */
> +
> +#ifndef __QCOM_ICE_H__
> +#define __QCOM_ICE_H__
> +
> +#include <linux/types.h>
> +
> +struct qcom_ice;
> +
> +enum qcom_ice_crypto_key_size {
> +	QCOM_ICE_CRYPTO_KEY_SIZE_INVALID	= 0x0,
> +	QCOM_ICE_CRYPTO_KEY_SIZE_128		= 0x1,
> +	QCOM_ICE_CRYPTO_KEY_SIZE_192		= 0x2,
> +	QCOM_ICE_CRYPTO_KEY_SIZE_256		= 0x3,
> +	QCOM_ICE_CRYPTO_KEY_SIZE_512		= 0x4,
> +};
> +
> +enum qcom_ice_crypto_alg {
> +	QCOM_ICE_CRYPTO_ALG_AES_XTS		= 0x0,
> +	QCOM_ICE_CRYPTO_ALG_BITLOCKER_AES_CBC	= 0x1,
> +	QCOM_ICE_CRYPTO_ALG_AES_ECB		= 0x2,
> +	QCOM_ICE_CRYPTO_ALG_ESSIV_AES_CBC	= 0x3,
> +};
> +
> +int qcom_ice_enable(struct qcom_ice *ice);
> +int qcom_ice_resume(struct qcom_ice *ice);
> +int qcom_ice_suspend(struct qcom_ice *ice);
> +int qcom_ice_program_key(struct qcom_ice *ice,
> +			 u8 algorithm_id, u8 key_size,
> +			 const u8 crypto_key[], u8 data_unit_size,
> +			 int slot);
> +int qcom_ice_evict_key(struct qcom_ice *ice, int slot);
> +struct qcom_ice *of_qcom_ice_get(struct device *dev);
> +#endif /* __QCOM_ICE_H__ */
> -- 
> 2.34.1
> 



[Index of Archives]     [Kernel]     [Gnu Classpath]     [Gnu Crypto]     [DM Crypt]     [Netfilter]     [Bugtraq]
  Powered by Linux