This adds device tree bindings for the Ux500 HASH block as a compatible in the STM32 HASH bindings. The Ux500 HASH binding has been used for ages in the kernel device tree for Ux500 but was never documented, so fill in the gap by making it a sibling of the STM32 HASH block, which is what it is. The relationship to the existing STM32 HASH block is pretty obvious when looking at the register map, and I have written patches to reuse the STM32 HASH driver on the Ux500. The main difference from the outside is that the Ux500 HASH lacks the interrupt line, so some special if-clauses are needed to accomodate this in the binding. Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx> --- ChangeLog v1->v2: - Use an else construction instead of if/if not. --- .../devicetree/bindings/crypto/st,stm32-hash.yaml | 23 +++++++++++++++++++++- 1 file changed, 22 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml b/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml index 4ccb335e8063..b767ec72a999 100644 --- a/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml +++ b/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml @@ -6,12 +6,18 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: STMicroelectronics STM32 HASH +description: The STM32 HASH block is built on the HASH block found in + the STn8820 SoC introduced in 2007, and subsequently used in the U8500 + SoC in 2010. + maintainers: - Lionel Debieve <lionel.debieve@xxxxxxxxxxx> properties: compatible: enum: + - st,stn8820-hash + - stericsson,ux500-hash - st,stm32f456-hash - st,stm32f756-hash @@ -41,11 +47,26 @@ properties: maximum: 2 default: 0 + power-domains: + maxItems: 1 + required: - compatible - reg - clocks - - interrupts + +allOf: + - if: + properties: + compatible: + items: + const: stericsson,ux500-hash + then: + properties: + interrupts: false + else: + required: + - interrupts additionalProperties: false -- 2.39.0
