Re: [PATCH 1/3] rcu: genericize RCU stall suppression functions

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




> On Dec 21, 2022, at 1:56 PM, Paul E. McKenney <paulmck@xxxxxxxxxx> wrote:
> 
> On Mon, Dec 19, 2022 at 02:29:08PM -0600, Robert Elliott wrote:
>> Convert the functions that temporarily suppress RCU CPU
>> stall reporting:
>>    rcu_sysrq_start()
>>    rcu_sysrq_end()
>> 
>> to more generic functions that may be called by functions
>> other than the SysRq handler:
>>    rcu_suppress_start()
>>    rcu_suppress_end()
>> 
>> Covert the underlying variable:
>>    rcu_cpu_stall_suppress
>> 
>> to an atomic variable so multiple threads can manipulate it at the
>> same time, incrementing it in start() and decrementing in end().
>> 
>> Expose that in sysfs in a read-only
>>    /sys/module/rcupdate/parameters/rcu_cpu_stall_suppress_dyn

Robert,

What is the use of exposing this read-only node?

I find it hard to believe anyone or any tool would be reading it during a scenario where stalls are required to be dynamically suppressed.

Or maybe I missed the point of this patch as I am late to the party.

Thanks,

 - J


>> 
>> Keep
>>    /sys/module/rcupdate/parameters/rcu_cpu_stall_suppress
>> as writeable by userspace, but OR that into the equations rather than
>> directly manipulate the atomic value.
>> 
>> Signed-off-by: Robert Elliott <elliott@xxxxxxx>
> 
> I really like the idea of making the suppressing and unsuppressing of
> RCU CPU stall warnings SMP-safe, thank you!  Yes, as far as I know,
> there have been no problems due to this, but accidents waiting to happen
> and all that.
> 
> Some comments and questions below.
> 
>> ---
>> .../RCU/Design/Requirements/Requirements.rst  |  6 +++---
>> Documentation/RCU/stallwarn.rst               | 19 +++++++++++++++----
>> arch/parisc/kernel/process.c                  |  2 +-
>> drivers/tty/sysrq.c                           |  4 ++--
>> include/linux/rcupdate.h                      |  8 ++++----
>> kernel/rcu/rcu.h                              | 11 ++++++-----
>> kernel/rcu/tree_stall.h                       | 18 ++++++++++--------
>> kernel/rcu/update.c                           | 11 ++++++++++-
>> 8 files changed, 51 insertions(+), 28 deletions(-)
>> 
>> diff --git a/Documentation/RCU/Design/Requirements/Requirements.rst b/Documentation/RCU/Design/Requirements/Requirements.rst
>> index 49387d823619..5083490bb6fc 100644
>> --- a/Documentation/RCU/Design/Requirements/Requirements.rst
>> +++ b/Documentation/RCU/Design/Requirements/Requirements.rst
>> @@ -1639,9 +1639,9 @@ against mishaps and misuse:
>>    ``rcupdate.rcu_cpu_stall_suppress`` to suppress the splats. This
>>    kernel parameter may also be set via ``sysfs``. Furthermore, RCU CPU
>>    stall warnings are counter-productive during sysrq dumps and during
>> -   panics. RCU therefore supplies the rcu_sysrq_start() and
>> -   rcu_sysrq_end() API members to be called before and after long
>> -   sysrq dumps. RCU also supplies the rcu_panic() notifier that is
>> +   panics. RCU therefore supplies the rcu_suppress_start() and
>> +   rcu_suppress_end() API members to be called before and after long
>> +   CPU usage. RCU also supplies the rcu_panic() notifier that is
>>    automatically invoked at the beginning of a panic to suppress further
>>    RCU CPU stall warnings.
>> 
>> diff --git a/Documentation/RCU/stallwarn.rst b/Documentation/RCU/stallwarn.rst
>> index e38c587067fc..9e6fba72f56d 100644
>> --- a/Documentation/RCU/stallwarn.rst
>> +++ b/Documentation/RCU/stallwarn.rst
>> @@ -135,13 +135,24 @@ see include/trace/events/rcu.h.
>> Fine-Tuning the RCU CPU Stall Detector
>> ======================================
>> 
>> -The rcuupdate.rcu_cpu_stall_suppress module parameter disables RCU's
>> -CPU stall detector, which detects conditions that unduly delay RCU grace
>> -periods.  This module parameter enables CPU stall detection by default,
>> -but may be overridden via boot-time parameter or at runtime via sysfs.
>> +RCU's CPU stall detector detects conditions that unduly delay RCU grace
>> +periods.  CPU stall detection is enabled by default, but may be overridden
>> +via boot-time parameter or at runtime via sysfs (accessible via
>> +/sys/module/rcupdate/parameters).
>> +
>> +The rcupdate.rcu_cpu_stall_suppress module parameter disables RCU's
>> +CPU stall detector.
>> +
>> +/sys/module/rcu_cpu_stall_suppress_dyn reports an internal semaphore
> 
> Actually an atomically updated variable as opposed to a semaphore,
> correct?  Replacing "an internal semaphore" with something like "a
> variable" would be fine from my viewpoint.
> 
>> +used by the RCU's CPU stall detector. Functions holding a CPU for a
>> +long time (e.g., sysrq printouts) increment this value before use
>> +and decrement it when done, so the value reports the number of
>> +functions currently disabling stalls.
>> +
>> The stall detector's idea of what constitutes "unduly delayed" is
>> controlled by a set of kernel configuration variables and cpp macros:
>> 
>> +
>> CONFIG_RCU_CPU_STALL_TIMEOUT
>> ----------------------------
> 
> And thank you for updating the documentation!
> 
>> diff --git a/arch/parisc/kernel/process.c b/arch/parisc/kernel/process.c
>> index c4f8374c7018..038378fe7bfa 100644
>> --- a/arch/parisc/kernel/process.c
>> +++ b/arch/parisc/kernel/process.c
>> @@ -126,7 +126,7 @@ void machine_power_off(void)
>>           "Please power this system off now.");
>> 
>>    /* prevent soft lockup/stalled CPU messages for endless loop. */
>> -    rcu_sysrq_start();
>> +    rcu_suppress_start();
>>    lockup_detector_soft_poweroff();
>>    for (;;);
>> }
>> diff --git a/drivers/tty/sysrq.c b/drivers/tty/sysrq.c
>> index d2b2720db6ca..81ab63a473a7 100644
>> --- a/drivers/tty/sysrq.c
>> +++ b/drivers/tty/sysrq.c
>> @@ -579,7 +579,7 @@ void __handle_sysrq(int key, bool check_mask)
>>    orig_suppress_printk = suppress_printk;
>>    suppress_printk = 0;
>> 
>> -    rcu_sysrq_start();
>> +    rcu_suppress_start();
>>    rcu_read_lock();
>>    /*
>>     * Raise the apparent loglevel to maximum so that the sysrq header
>> @@ -623,7 +623,7 @@ void __handle_sysrq(int key, bool check_mask)
>>        console_loglevel = orig_log_level;
>>    }
>>    rcu_read_unlock();
>> -    rcu_sysrq_end();
>> +    rcu_suppress_end();
>> 
>>    suppress_printk = orig_suppress_printk;
>> }
>> diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h
>> index 03abf883a281..c0d8a4aae7ff 100644
>> --- a/include/linux/rcupdate.h
>> +++ b/include/linux/rcupdate.h
>> @@ -131,11 +131,11 @@ static inline void rcu_init_tasks_generic(void) { }
>> #endif
>> 
>> #ifdef CONFIG_RCU_STALL_COMMON
>> -void rcu_sysrq_start(void);
>> -void rcu_sysrq_end(void);
>> +void rcu_suppress_start(void);
>> +void rcu_suppress_end(void);
>> #else /* #ifdef CONFIG_RCU_STALL_COMMON */
>> -static inline void rcu_sysrq_start(void) { }
>> -static inline void rcu_sysrq_end(void) { }
>> +static inline void rcu_suppress_start(void) { }
>> +static inline void rcu_suppress_end(void) { }
>> #endif /* #else #ifdef CONFIG_RCU_STALL_COMMON */
>> 
>> #if defined(CONFIG_NO_HZ_FULL) && (!defined(CONFIG_GENERIC_ENTRY) || !defined(CONFIG_KVM_XFER_TO_GUEST_WORK))
>> diff --git a/kernel/rcu/rcu.h b/kernel/rcu/rcu.h
>> index c5aa934de59b..a658955a1174 100644
>> --- a/kernel/rcu/rcu.h
>> +++ b/kernel/rcu/rcu.h
>> @@ -224,24 +224,25 @@ extern int rcu_cpu_stall_ftrace_dump;
>> extern int rcu_cpu_stall_suppress;
>> extern int rcu_cpu_stall_timeout;
>> extern int rcu_exp_cpu_stall_timeout;
>> +extern atomic_t rcu_cpu_stall_suppress_dyn;
>> int rcu_jiffies_till_stall_check(void);
>> int rcu_exp_jiffies_till_stall_check(void);
>> 
>> static inline bool rcu_stall_is_suppressed(void)
>> {
>> -    return rcu_stall_is_suppressed_at_boot() || rcu_cpu_stall_suppress;
>> +    return rcu_stall_is_suppressed_at_boot() ||
>> +           rcu_cpu_stall_suppress ||
>> +           atomic_read(&rcu_cpu_stall_suppress_dyn);
>> }
>> 
>> #define rcu_ftrace_dump_stall_suppress() \
>> do { \
>> -    if (!rcu_cpu_stall_suppress) \
>> -        rcu_cpu_stall_suppress = 3; \
> 
> One thing we are losing here is the ability to see what is suppressing
> the current stall, for example, from a crash dump.  Maybe that is OK,
> as I haven't needed to debug that sort of thing.
> 
> Thoughts from those who have had this debugging experience?
> 
>> +    atomic_inc(&rcu_cpu_stall_suppress_dyn); \
>> } while (0)
>> 
>> #define rcu_ftrace_dump_stall_unsuppress() \
>> do { \
>> -    if (rcu_cpu_stall_suppress == 3) \
>> -        rcu_cpu_stall_suppress = 0; \
>> +    atomic_dec(&rcu_cpu_stall_suppress_dyn); \
>> } while (0)
>> 
>> #else /* #endif #ifdef CONFIG_RCU_STALL_COMMON */
>> diff --git a/kernel/rcu/tree_stall.h b/kernel/rcu/tree_stall.h
>> index 5653560573e2..260748bc5bc8 100644
>> --- a/kernel/rcu/tree_stall.h
>> +++ b/kernel/rcu/tree_stall.h
>> @@ -103,23 +103,25 @@ bool rcu_gp_might_be_stalled(void)
>>    return !time_before(j, READ_ONCE(rcu_state.gp_start) + d);
>> }
>> 
>> -/* Don't do RCU CPU stall warnings during long sysrq printouts. */
>> -void rcu_sysrq_start(void)
>> +/* Don't do RCU CPU stall warnings during functions holding the CPU
>> + * for a long period of time such as long sysrq printouts.
>> + */
>> +void rcu_suppress_start(void)
>> {
>> -    if (!rcu_cpu_stall_suppress)
>> -        rcu_cpu_stall_suppress = 2;
> 
> And the same point here.
> 
>> +    atomic_inc(&rcu_cpu_stall_suppress_dyn);
>> }
>> +EXPORT_SYMBOL_GPL(rcu_suppress_start);
> 
> If this is being exported to modules, the question of who suppressed
> the CPU stalls might at some point become more urgent.
> 
> If the problem was reproducible, I would simply attach a BPF program to
> rcu_suppress_start() and rcu_suppress_end() counting the stack traces of
> all callers to these functions.  This might or might not make everyone
> happy, though.
> 
>> -void rcu_sysrq_end(void)
>> +void rcu_suppress_end(void)
>> {
>> -    if (rcu_cpu_stall_suppress == 2)
>> -        rcu_cpu_stall_suppress = 0;
>> +    atomic_dec(&rcu_cpu_stall_suppress_dyn);
>> }
>> +EXPORT_SYMBOL_GPL(rcu_suppress_end);
>> 
>> /* Don't print RCU CPU stall warnings during a kernel panic. */
>> static int rcu_panic(struct notifier_block *this, unsigned long ev, void *ptr)
>> {
>> -    rcu_cpu_stall_suppress = 1;
>> +    atomic_inc(&rcu_cpu_stall_suppress_dyn);
>>    return NOTIFY_DONE;
>> }
>> 
>> diff --git a/kernel/rcu/update.c b/kernel/rcu/update.c
>> index f5e6a2f95a2a..ceee9d777384 100644
>> --- a/kernel/rcu/update.c
>> +++ b/kernel/rcu/update.c
>> @@ -501,11 +501,18 @@ EXPORT_SYMBOL_GPL(rcutorture_sched_setaffinity);
>> #ifdef CONFIG_RCU_STALL_COMMON
>> int rcu_cpu_stall_ftrace_dump __read_mostly;
>> module_param(rcu_cpu_stall_ftrace_dump, int, 0644);
>> -int rcu_cpu_stall_suppress __read_mostly; // !0 = suppress stall warnings.
>> +
>> +int rcu_cpu_stall_suppress __read_mostly; // !0 = suppress stall warnings from sysfs
>> EXPORT_SYMBOL_GPL(rcu_cpu_stall_suppress);
>> module_param(rcu_cpu_stall_suppress, int, 0644);
>> +
>> +atomic_t rcu_cpu_stall_suppress_dyn __read_mostly; // !0 = suppress stall warnings from functions
>> +EXPORT_SYMBOL_GPL(rcu_cpu_stall_suppress_dyn);
>> +module_param_named(rcu_cpu_stall_suppress_dyn, rcu_cpu_stall_suppress_dyn.counter, int, 0444);
> 
> I am not seeing a valid use case for specifying an initial
> value on the kernel command line.  Or does this somehow prevent
> rcupdate.rcu_cpu_stall_suppress_dyn from being specified on the kernel
> command line?
> 
> If something like rcupdate.rcu_cpu_stall_suppress_dyn=3 can be specified
> (incorrectly, in my current view) on the kernel command line, maybe
> something as shown below would help?
> 
>> +
>> int rcu_cpu_stall_timeout __read_mostly = CONFIG_RCU_CPU_STALL_TIMEOUT;
>> module_param(rcu_cpu_stall_timeout, int, 0644);
>> +
>> int rcu_exp_cpu_stall_timeout __read_mostly = CONFIG_RCU_EXP_CPU_STALL_TIMEOUT;
>> module_param(rcu_exp_cpu_stall_timeout, int, 0644);
>> #endif /* #ifdef CONFIG_RCU_STALL_COMMON */
>> @@ -616,6 +623,8 @@ void __init rcupdate_announce_bootup_oddness(void)
>>        pr_info("\tAll grace periods are expedited (rcu_expedited).\n");
>>    if (rcu_cpu_stall_suppress)
>>        pr_info("\tRCU CPU stall warnings suppressed (rcu_cpu_stall_suppress).\n");
>> +    if (atomic_read(&rcu_cpu_stall_suppress_dyn))
>> +        pr_info("\tDynamic RCU CPU stall warnings suppressed (rcu_cpu_stall_suppress_dyn).\n");
> 
> Should this instead be a WARN_ON() placed somewhere so that it won't
> mess up the printing of the other parameters?
> 
> Or maybe have this code set it to back to zero, with the message
> indicating that this is being done?
> 
>>    if (rcu_cpu_stall_timeout != CONFIG_RCU_CPU_STALL_TIMEOUT)
>>        pr_info("\tRCU CPU stall warnings timeout set to %d (rcu_cpu_stall_timeout).\n", rcu_cpu_stall_timeout);
>>    rcu_tasks_bootup_oddness();
>> -- 
>> 2.38.1
>> 




[Index of Archives]     [Kernel]     [Gnu Classpath]     [Gnu Crypto]     [DM Crypt]     [Netfilter]     [Bugtraq]
  Powered by Linux