Re: [PATCH 1/6] crypto: starfive - Add StarFive crypto engine support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 30/11/2022 06:52, Jia Jie Ho wrote:
> Adding device probe and DMA init for StarFive
> hardware crypto engine.
> 
> Signed-off-by: Jia Jie Ho <jiajie.ho@xxxxxxxxxxxxxxxx>
> Signed-off-by: Huan Feng <huan.feng@xxxxxxxxxxxxxxxx>
> ---


> +
> +static const struct of_device_id starfive_dt_ids[] = {
> +	{ .compatible = "starfive,jh7110-crypto", .data = NULL},
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, starfive_dt_ids);

Keep your table close to its usage, just like in many other drivers.

> +
> +static int starfive_dma_init(struct starfive_sec_dev *sdev)
> +{
> +	dma_cap_mask_t mask;
> +	int err;
> +
> +	sdev->sec_xm_m = NULL;
> +	sdev->sec_xm_p = NULL;
> +
> +	dma_cap_zero(mask);
> +	dma_cap_set(DMA_SLAVE, mask);
> +
> +	sdev->sec_xm_m = dma_request_chan(sdev->dev, "sec_m");
> +	if (IS_ERR(sdev->sec_xm_m)) {
> +		dev_err(sdev->dev, "sec_m dma channel request failed.\n");

return dev_err_probe

> +		return PTR_ERR(sdev->sec_xm_m);
> +	}
> +
> +	sdev->sec_xm_p = dma_request_chan(sdev->dev, "sec_p");
> +	if (IS_ERR(sdev->sec_xm_p)) {
> +		dev_err(sdev->dev, "sec_p dma channel request failed.\n");

dev_err_probe

> +		goto err_dma_out;
> +	}
> +
> +	init_completion(&sdev->sec_comp_m);
> +	init_completion(&sdev->sec_comp_p);
> +
> +	return 0;
> +
> +err_dma_out:
> +	dma_release_channel(sdev->sec_xm_m);

I don't think you tested it. Not even built with proper tools liek
smatch, sparse, W=1. Where do you set err?

> +
> +	return err;
> +}
> +
> +static void starfive_dma_cleanup(struct starfive_sec_dev *sdev)
> +{
> +	dma_release_channel(sdev->sec_xm_p);
> +	dma_release_channel(sdev->sec_xm_m);
> +}
> +
> +static int starfive_cryp_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct starfive_sec_dev *sdev;
> +	struct resource *res;
> +	int pages = 0;
> +	int ret;
> +
> +	sdev = devm_kzalloc(dev, sizeof(*sdev), GFP_KERNEL);
> +	if (!sdev)
> +		return -ENOMEM;
> +
> +	sdev->dev = dev;
> +
> +	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "secreg");
> +	sdev->io_base = devm_ioremap_resource(dev, res);

I think there is a wrapper for both calls...

> +
> +	if (IS_ERR(sdev->io_base))
> +		return PTR_ERR(sdev->io_base);
> +
> +	sdev->use_side_channel_mitigation =
> +		device_property_read_bool(dev, "enable-side-channel-mitigation");
> +	sdev->use_dma = device_property_read_bool(dev, "enable-dma");
> +	sdev->dma_maxburst = 32;
> +
> +	sdev->sec_hclk = devm_clk_get(dev, "sec_hclk");
> +	if (IS_ERR(sdev->sec_hclk)) {
> +		dev_err(dev, "Failed to get sec_hclk.\n");
> +		return PTR_ERR(sdev->sec_hclk);

return dev_err_probe

> +	}
> +
> +	sdev->sec_ahb = devm_clk_get(dev, "sec_ahb");
> +	if (IS_ERR(sdev->sec_ahb)) {
> +		dev_err(dev, "Failed to get sec_ahb.\n");
> +		return PTR_ERR(sdev->sec_ahb);

return dev_err_probe

> +	}
> +
> +	sdev->rst_hresetn = devm_reset_control_get_shared(sdev->dev, "sec_hre");
> +	if (IS_ERR(sdev->rst_hresetn)) {
> +		dev_err(sdev->dev, "Failed to get sec_hre.\n");
> +		return PTR_ERR(sdev->rst_hresetn);

return dev_err_probe

> +	}
> +
> +	clk_prepare_enable(sdev->sec_hclk);
> +	clk_prepare_enable(sdev->sec_ahb);
> +	reset_control_deassert(sdev->rst_hresetn);
> +
> +	platform_set_drvdata(pdev, sdev);
> +
> +	spin_lock(&dev_list.lock);
> +	list_add(&sdev->list, &dev_list.dev_list);
> +	spin_unlock(&dev_list.lock);
> +
> +	if (sdev->use_dma) {
> +		ret = starfive_dma_init(sdev);
> +		if (ret) {
> +			dev_err(dev, "Failed to initialize DMA channel.\n");
> +			goto err_dma_init;
> +		}
> +	}
> +
> +	pages = get_order(STARFIVE_MSG_BUFFER_SIZE);
> +
> +	sdev->pages_count = pages >> 1;
> +	sdev->data_buf_len = STARFIVE_MSG_BUFFER_SIZE >> 1;
> +
> +	/* Initialize crypto engine */
> +	sdev->engine = crypto_engine_alloc_init(dev, 1);
> +	if (!sdev->engine) {
> +		ret = -ENOMEM;
> +		goto err_engine;
> +	}
> +
> +	ret = crypto_engine_start(sdev->engine);
> +	if (ret)
> +		goto err_engine_start;
> +
> +	dev_info(dev, "Crypto engine started\n");

Drop silly probe success messages.

> +
> +	return 0;
> +
> +err_engine_start:
> +	crypto_engine_exit(sdev->engine);
> +err_engine:
> +	starfive_dma_cleanup(sdev);
> +err_dma_init:
> +	spin_lock(&dev_list.lock);
> +	list_del(&sdev->list);
> +	spin_unlock(&dev_list.lock);
> +
> +	return ret;
> +}
> +
> +static int starfive_cryp_remove(struct platform_device *pdev)
> +{
> +	struct starfive_sec_dev *sdev = platform_get_drvdata(pdev);
> +
> +	if (!sdev)
> +		return -ENODEV;
> +
> +	crypto_engine_stop(sdev->engine);
> +	crypto_engine_exit(sdev->engine);
> +
> +	starfive_dma_cleanup(sdev);
> +
> +	spin_lock(&dev_list.lock);
> +	list_del(&sdev->list);
> +	spin_unlock(&dev_list.lock);
> +
> +	clk_disable_unprepare(sdev->sec_hclk);
> +	clk_disable_unprepare(sdev->sec_ahb);
> +	reset_control_assert(sdev->rst_hresetn);
> +
> +	return 0;
> +}
> +
> +#ifdef CONFIG_PM
> +static int starfive_cryp_runtime_suspend(struct device *dev)
> +{
> +	struct starfive_sec_dev *sdev = dev_get_drvdata(dev);
> +
> +	clk_disable_unprepare(sdev->sec_ahb);
> +	clk_disable_unprepare(sdev->sec_hclk);
> +
> +	return 0;
> +}
> +
> +static int starfive_cryp_runtime_resume(struct device *dev)
> +{
> +	struct starfive_sec_dev *sdev = dev_get_drvdata(dev);
> +	int ret;
> +
> +	ret = clk_prepare_enable(sdev->sec_ahb);
> +	if (ret) {
> +		dev_err(sdev->dev, "Failed to prepare_enable sec_ahb clock\n");
> +		return ret;
> +	}
> +
> +	ret = clk_prepare_enable(sdev->sec_hclk);
> +	if (ret) {
> +		dev_err(sdev->dev, "Failed to prepare_enable sec_hclk clock\n");
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +#endif
> +
> +static const struct dev_pm_ops starfive_cryp_pm_ops = {
> +	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
> +				pm_runtime_force_resume)
> +	SET_RUNTIME_PM_OPS(starfive_cryp_runtime_suspend,
> +			   starfive_cryp_runtime_resume, NULL)
> +};
> +
> +static struct platform_driver starfive_cryp_driver = {
> +	.probe  = starfive_cryp_probe,
> +	.remove = starfive_cryp_remove,
> +	.driver = {
> +		.name           = DRIVER_NAME,
> +		.pm		= &starfive_cryp_pm_ops,
> +		.of_match_table = starfive_dt_ids,
> +	},
> +};
> +
> +module_platform_driver(starfive_cryp_driver);
> +
> +MODULE_LICENSE("GPL");
> +MODULE_DESCRIPTION("StarFive hardware crypto acceleration");
> diff --git a/drivers/crypto/starfive/starfive-regs.h b/drivers/crypto/starfive/starfive-regs.h
> new file mode 100644
> index 000000000000..0d680cb1f502
> --- /dev/null
> +++ b/drivers/crypto/starfive/starfive-regs.h
> @@ -0,0 +1,26 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +#ifndef __STARFIVE_REGS_H__
> +#define __STARFIVE_REGS_H__
> +
> +#define STARFIVE_ALG_CR_OFFSET			0x0
> +#define STARFIVE_ALG_FIFO_OFFSET		0x4
> +#define STARFIVE_IE_MASK_OFFSET			0x8
> +#define STARFIVE_IE_FLAG_OFFSET			0xc
> +#define STARFIVE_DMA_IN_LEN_OFFSET		0x10
> +#define STARFIVE_DMA_OUT_LEN_OFFSET		0x14
> +
> +union starfive_alg_cr {
> +	u32 v;
> +	struct {
> +		u32 start			:1;
> +		u32 aes_dma_en			:1;
> +		u32 rsvd_0			:1;
> +		u32 hash_dma_en			:1;
> +		u32 alg_done			:1;
> +		u32 rsvd_1			:3;
> +		u32 clear			:1;
> +		u32 rsvd_2			:23;
> +	};
> +};
> +
> +#endif
> diff --git a/drivers/crypto/starfive/starfive-str.h b/drivers/crypto/starfive/starfive-str.h
> new file mode 100644
> index 000000000000..4ba3c56f0573
> --- /dev/null
> +++ b/drivers/crypto/starfive/starfive-str.h
> @@ -0,0 +1,74 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +#ifndef __STARFIVE_STR_H__
> +#define __STARFIVE_STR_H__
> +
> +#include <linux/delay.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/dmaengine.h>
> +
> +#include <crypto/engine.h>
> +
> +#include "starfive-regs.h"
> +
> +#define STARFIVE_MSG_BUFFER_SIZE		SZ_16K
> +
> +struct starfive_sec_ctx {
> +	struct crypto_engine_ctx		enginectx;
> +	struct starfive_sec_dev			*sdev;
> +
> +	u8					*buffer;
> +};
> +
> +struct starfive_sec_dev {
> +	struct list_head			list;
> +	struct device				*dev;
> +
> +	struct clk				*sec_hclk;
> +	struct clk				*sec_ahb;
> +	struct reset_control			*rst_hresetn;
> +
> +	void __iomem				*io_base;
> +	phys_addr_t				io_phys_base;
> +
> +	size_t					data_buf_len;
> +	int					pages_count;
> +	u32					use_side_channel_mitigation;
> +	u32					use_dma;
> +	u32					dma_maxburst;
> +	struct dma_chan				*sec_xm_m;
> +	struct dma_chan				*sec_xm_p;
> +	struct dma_slave_config			cfg_in;
> +	struct dma_slave_config			cfg_out;
> +	struct completion			sec_comp_m;
> +	struct completion			sec_comp_p;
> +
> +	struct crypto_engine			*engine;
> +
> +	union starfive_alg_cr			alg_cr;
> +};
> +
> +static inline u32 starfive_sec_read(struct starfive_sec_dev *sdev, u32 offset)
> +{
> +	return __raw_readl(sdev->io_base + offset);

I don't think these read/write wrappers help anyhow...


Best regards,
Krzysztof




[Index of Archives]     [Kernel]     [Gnu Classpath]     [Gnu Crypto]     [DM Crypt]     [Netfilter]     [Bugtraq]
  Powered by Linux