Le Wed, Nov 16, 2022 at 09:04:07PM +0300, Mikhail Rudenko a écrit : > > On 2022-09-29 at 09:45 +02, LABBE Corentin <clabbe@xxxxxxxxxxxx> wrote: > > Le Tue, Sep 27, 2022 at 11:39:17PM +0200, Aurelien Jarno a écrit : > >> On 2022-09-27 21:46, LABBE Corentin wrote: > >> > Le Tue, Sep 27, 2022 at 06:37:53PM +0200, Aurelien Jarno a écrit : > >> > > On 2022-09-20 10:35, Robin Murphy wrote: > >> > > > On 2022-09-19 22:00, Jason A. Donenfeld wrote: > >> > > > > The Rockchip driver has long existed out of tree, but not upstream. > >> > > > > There is support for it upstream in u-boot, but not in Linux proper. > >> > > > > This commit imports the GPLv2 driver written by Lin Jinhan, together > >> > > > > with the DTS and config blobs from Wevsty. > >> > > > > >> > > > Note that Corentin has a series enabling the full crypto driver for > >> > > > RK3328 and RK3399[1], so it would seem more sensible to add TRNG support > >> > > > to that. Having confliciting compatibles for the same hardware that > >> > > > force the user to change their DT to choose one functionality or the > >> > > > other isn't good (plus there's also no binding for this one). > >> > > > >> > > It might make sense for the cryptov1-rng driver (I haven't checked). For > >> > > the cryptov2-rng driver, I looked at the RK3568 TRM (I can't find the > >> > > RK3588 one), and from what I understand crypto and TRNG are two > >> > > different devices, using different address spaces, clock, reset and > >> > > interrupts. The vendor kernel uses two different drivers. > >> > > > >> > > >> > I confirm that TRNG is not on the same IP on rk3568, something I didnt remark when doing my V2 driver. (I need to remove rng clock from rk3568 dt). > >> > But the rk3588 crypto IP and the TRNG are in the same device. > >> > >> Ok, thanks for confirming about the rk3568. It seems the only one in the > >> family with separate devices for TRNG and crypto. Does it means we need > >> a separate TRNG driver only for it? Or could we handle it the same way > >> than for instance rk3588 anyway? > > > > I just got now the part 1 of rk3588 TRM which I has missing and it show some conflicting information. > > rk3588 seems to have both a dedicated TRNG (TRNG_NS/TRNG_S) with dedicated address space and a TRNG inside the crypto IP. > > But for the moment, the TRNG inside crypto IP seems defective. > > So what's the ultimate decision? Does anyone work on merging this into > the existing crypto driver? I have a use case with an rk3399-based board, > where having hardware rng enhances boot times dramatically (at least for > some userspaces; see also [1]). > > [1] https://bugzilla.kernel.org/show_bug.cgi?id=216502 > Hello I started to work on adding RNG to rk3288_crypto. I need to publish the work on my github and take time to send it for review. Regards
