On Wed, Sep 21, 2022 at 12:22:03PM +0530, Bhupesh Sharma wrote:
> On 9/21/22 11:57 AM, Krzysztof Kozlowski wrote:
> > On 21/09/2022 08:16, Bhupesh Sharma wrote:
> > >
> > >
> > > On 9/20/22 8:42 PM, Krzysztof Kozlowski wrote:
> > > > On 20/09/2022 13:40, Bhupesh Sharma wrote:
> > > > > Since we decided to use soc specific compatibles for describing
> > > > > the qce crypto IP nodes in the device-trees, adapt the driver
> > > > > now to handle the same.
> > > > >
> > > > > Keep the old deprecated compatible strings still in the driver,
> > > > > to ensure backward compatibility.
> > > > >
> > > > > Cc: Bjorn Andersson <andersson@xxxxxxxxxx>
> > > > > Cc: Rob Herring <robh@xxxxxxxxxx>
> > > > > Cc: herbert@xxxxxxxxxxxxxxxxxxx
> > > > > Tested-by: Jordan Crouse <jorcrous@xxxxxxxxxx>
> > > > > Signed-off-by: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
> > > > > ---
> > > > > drivers/crypto/qce/core.c | 9 +++++++++
> > > > > 1 file changed, 9 insertions(+)
> > > > >
> > > > > diff --git a/drivers/crypto/qce/core.c b/drivers/crypto/qce/core.c
> > > > > index 63be06df5519..99ed540611ab 100644
> > > > > --- a/drivers/crypto/qce/core.c
> > > > > +++ b/drivers/crypto/qce/core.c
> > > > > @@ -291,8 +291,17 @@ static int qce_crypto_remove(struct platform_device *pdev)
> > > > > }
> > > > > static const struct of_device_id qce_crypto_of_match[] = {
> > > > > + /* Following two entries are deprecated (kept only for backward compatibility) */
> > > > > { .compatible = "qcom,crypto-v5.1", },
> > > > > { .compatible = "qcom,crypto-v5.4", },
> > > >
> > > > This is okay, so there is no ABI break.
> > >
> > > Great. Thanks for the confirmation.
> > >
> > > > > + /* Add compatible strings as per updated dt-bindings, here: */
> > > > > + { .compatible = "qcom,ipq4019-qce", },
> > > > > + { .compatible = "qcom,ipq6018-qce", },
> > > > > + { .compatible = "qcom,ipq8074-qce", },
> > > > > + { .compatible = "qcom,msm8996-qce", },
> > > > > + { .compatible = "qcom,sdm845-qce", },
> > > > > + { .compatible = "qcom,sm8150-qce", },
> > > > > + { .compatible = "qcom,sm8250-qce", },
> > > >
> > > > This is a bit odd... you have 7 devices which are simply compatible or
> > > > even the same. This should be instead one compatible.
> > > >
> > > > I don't really get why do you want to deprecate "qcom,crypto-v5.1".
> > > > Commit msg only says "we decided" but I do not know who is "we" and "why
> > > > we decided like this". If you want to deprecate it, perfectly fine by
> > > > me, but please say in commit msg why you are doing it.
> > >
> > > I understand. This patchset has been in flight for some time and hence I
> > > might have missed sharing some detailed information about the review
> > > comments and rework done along the way (in the cover letter for this
> > > series).
> > >
> > > Coming back to your concern, here is the relevant background:
> > > - Please see:
> > > https://lore.kernel.org/linux-arm-msm/20210316222825.GA3792517@xxxxxxxxxxxxxxxxxx/
> > >
> > > - Rob shared some comments on the v1 series regarding the soc-specific
> > > compatibles. He mentioned in the above thread that 'you should stick
> > > with SoC specific compatibles as *everyone* else does (including most
> > > QCom bindings).'
> > >
> > > - So, while I had proposed "qcom,crypto-v5.1" (for ipq6018) and
> > > "qcom,crypto-v5.4" (for sdm845, sm8150) etc. as the compatible(s) in the
> > > v1 series, I shifted to using the soc-specific compatibles from the v2
> > > series, onwards.
> >
> > Then the reason could be - Reviewers preferred SoC-based compatible
> > instead of IP-block-version-based.
> >
> > What is confusing is the difference between that link and here. That
> > link wanted to introduce 4 different compatibles... and here you have
> > even 7 compatibles being the same.
>
> The link points to v1 version and we are on v7 currently. So there have been
> other comments and reworks along the way :)
>
> All of these have been referred to in the cover letter logs.
>
> Again please refer to Vladimir's comments on v5 version here, where he
> suggested adding soc compatibles for 'ipq8074' and 'msm8996' as well.
>
> -
> https://lore.kernel.org/lkml/7328ae17-1dc7-eaa1-5993-411b986e5e02@xxxxxxxxxx/
> -
> https://lore.kernel.org/lkml/f5b7c89c-3bdd-1e1e-772e-721aa5e95bbf@xxxxxxxxxx/
> -
> https://lore.kernel.org/lkml/7328ae17-1dc7-eaa1-5993-411b986e5e02@xxxxxxxxxx/
>
> Also the 7 SoC compatibles do not point to the same crypto IP version. We
> have two IP versions currently supported upstream, "qcom,crypto-v5.1" and
> "qcom,crypto-v5.4" (with patches for support for newer versions under work
> and can be expected to land upstream in near future).
>
> However, if you suggest, we can add some comments in the dt-binding doc
> to reflect which SoC supports which version.
>
> > > - Basically, since we are going to have newer qce IP versions available
> > > in near future, e.g. "qcom,crypto-v5.5" etc, and we will have 2 or more
> > > SoCs also sharing 1 version, these compatibles would grow and become
> > > more confusing. IMO, having a soc-specific compatible in such cases is
> > > probably a much cleaner approach.
> > >
> > > Hope this helps answer some of your concerns and provides some relevant
> > > background information.
> >
> > Sure, but I still think you should have only one compatible in the
> > driver in such case. You don't have differences between them from the
> > driver point of view, so the devices seem to be compatible.
> >
> > If not, what are the differences?
>
> There can always be requirements for compatible specific handling done in
> the driver. See Bjorn's comment here for example:
> https://lore.kernel.org/lkml/YZKhqJuFlRVeQkCc@xxxxxxxxxxx/ , as an example
> of 'clk_get' calls conditional based on the compatible instead.
>
How about providing a generic compatible without the version number
(i.e. qcom,crypto) and then in the DT binding require this and
qcom,<platform>-crypto, and if we have such quirky integration behavior
for a particular platform we can add the special handling in the driver
for the platform compatible.
(And we obviously keep the two existing version-based compatibles in the
driver, for backwards compatibility)
Regards,
Bjorn
> This series is to get some early comments and might need some further rework
> / rearrangement.
>
> However, I would request Rob to share his views as well on the soc specific
> compatibles, since it was originally his suggestion. I can rework the
> patchset accordingly.
>
> Thanks,
> Bhupesh
