The request context is exactly for that: context state related
to the request. The code was (ab)using the state used to store
the hardware state for this. Move out the three variables from
the hardware state to the request context and clean up the
mess left behind.
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
ChangeLog v2->v3:
- Rebased on v6.0-rc1
ChangeLog v1->v2:
- No changes
---
drivers/crypto/ux500/hash/hash_alg.h | 21 +++++++--------
drivers/crypto/ux500/hash/hash_core.c | 38 +++++++++++----------------
2 files changed, 26 insertions(+), 33 deletions(-)
diff --git a/drivers/crypto/ux500/hash/hash_alg.h b/drivers/crypto/ux500/hash/hash_alg.h
index d9d59dba6e6e..5aa86c4855f5 100644
--- a/drivers/crypto/ux500/hash/hash_alg.h
+++ b/drivers/crypto/ux500/hash/hash_alg.h
@@ -214,17 +214,10 @@ struct hash_register {
* @csr[52]: HASH Context Swap Registers 0-39.
* @csfull: HASH Context Swap Registers 40 ie Status flags.
* @csdatain: HASH Context Swap Registers 41 ie Input data.
- * @buffer: Working buffer for messages going to the hardware.
- * @length: Length of the part of message hashed so far (floor(N/64) * 64).
- * @index: Valid number of bytes in buffer (N % 64).
*
* This structure is used between context switches, i.e. when ongoing jobs are
* interupted with new jobs. When this happens we need to store intermediate
* results in software.
- *
- * WARNING: "index" is the member of the structure, to be sure that "buffer"
- * is aligned on a 4-bytes boundary. This is highly implementation dependent
- * and MUST be checked whenever this code is ported on new platforms.
*/
struct hash_state {
u32 temp_cr;
@@ -233,9 +226,6 @@ struct hash_state {
u32 csr[52];
u32 csfull;
u32 csdatain;
- u32 buffer[HASH_BLOCK_SIZE / sizeof(u32)];
- struct uint64 length;
- u8 index;
};
/**
@@ -333,13 +323,22 @@ struct hash_ctx {
/**
* struct hash_ctx - The request context used for hash calculations.
+ * @buffer: Working buffer for messages going to the hardware.
+ * @length: Length of the part of message hashed so far (floor(N/64) * 64).
+ * @index: Valid number of bytes in buffer (N % 64).
* @state: The state of the current calculations.
* @dma_mode: Used in special cases (workaround), e.g. need to change to
* cpu mode, if not supported/working in dma mode.
* @hw_initialized: Indicates if hardware is initialized for new operations.
+ *
+ * WARNING: "index" is the member of the structure, to be sure that "buffer"
+ * is aligned on a 4-bytes boundary. This is highly implementation dependent
+ * and MUST be checked whenever this code is ported on new platforms.
*/
struct hash_req_ctx {
- struct hash_state state;
+ u32 buffer[HASH_BLOCK_SIZE / sizeof(u32)];
+ struct uint64 length;
+ u8 index;
bool dma_mode;
bool hw_initialized;
};
diff --git a/drivers/crypto/ux500/hash/hash_core.c b/drivers/crypto/ux500/hash/hash_core.c
index 844ef70301d5..c55f35b366be 100644
--- a/drivers/crypto/ux500/hash/hash_core.c
+++ b/drivers/crypto/ux500/hash/hash_core.c
@@ -448,7 +448,9 @@ static int ux500_hash_init(struct ahash_request *req)
if (!ctx->key)
ctx->keylen = 0;
- memset(&req_ctx->state, 0, sizeof(struct hash_state));
+ req_ctx->index = 0;
+ req_ctx->length.low_word = 0;
+ req_ctx->length.high_word = 0;
req_ctx->hw_initialized = false;
if (hash_mode == HASH_MODE_DMA) {
if (req->nbytes < HASH_DMA_ALIGN_SIZE) {
@@ -553,11 +555,11 @@ static void hash_messagepad(struct hash_device_data *device_data,
*/
static void hash_incrementlength(struct hash_req_ctx *ctx, u32 incr)
{
- ctx->state.length.low_word += incr;
+ ctx->length.low_word += incr;
/* Check for wrap-around */
- if (ctx->state.length.low_word < incr)
- ctx->state.length.high_word++;
+ if (ctx->length.low_word < incr)
+ ctx->length.high_word++;
}
/**
@@ -872,9 +874,9 @@ static int hash_hw_final(struct ahash_request *req)
}
}
- if (req_ctx->state.index) {
- hash_messagepad(device_data, req_ctx->state.buffer,
- req_ctx->state.index);
+ if (req_ctx->index) {
+ hash_messagepad(device_data, req_ctx->buffer,
+ req_ctx->index);
} else {
HASH_SET_DCAL;
while (readl(&device_data->base->str) & HASH_STR_DCAL_MASK)
@@ -922,8 +924,8 @@ int hash_hw_update(struct ahash_request *req)
struct crypto_hash_walk walk;
int msg_length;
- index = req_ctx->state.index;
- buffer = (u8 *)req_ctx->state.buffer;
+ index = req_ctx->index;
+ buffer = (u8 *)req_ctx->buffer;
msg_length = crypto_hash_walk_first(req, &walk);
@@ -931,10 +933,10 @@ int hash_hw_update(struct ahash_request *req)
if (msg_length == 0)
return 0;
- /* Check if ctx->state.length + msg_length
+ /* Check if ctx->length + msg_length
overflows */
- if (msg_length > (req_ctx->state.length.low_word + msg_length) &&
- HASH_HIGH_WORD_MAX_VAL == req_ctx->state.length.high_word) {
+ if (msg_length > (req_ctx->length.low_word + msg_length) &&
+ req_ctx->length.high_word == HASH_HIGH_WORD_VAL_MAX) {
pr_err("%s: HASH_MSG_LENGTH_OVERFLOW!\n", __func__);
return crypto_hash_walk_done(&walk, -EPERM);
}
@@ -955,9 +957,9 @@ int hash_hw_update(struct ahash_request *req)
msg_length = crypto_hash_walk_done(&walk, 0);
}
- req_ctx->state.index = index;
+ req_ctx->index = index;
dev_dbg(device_data->dev, "%s: indata length=%d\n",
- __func__, req_ctx->state.index);
+ __func__, req_ctx->index);
return 0;
}
@@ -980,14 +982,6 @@ int hash_resume_state(struct hash_device_data *device_data,
return -EPERM;
}
- /* Check correctness of index and length members */
- if (device_state->index > HASH_BLOCK_SIZE ||
- (device_state->length.low_word % HASH_BLOCK_SIZE) != 0) {
- dev_err(device_data->dev, "%s: HASH_INVALID_PARAMETER!\n",
- __func__);
- return -EPERM;
- }
-
/*
* INIT bit. Set this bit to 0b1 to reset the HASH processor core and
* prepare the initialize the HASH accelerator to compute the message
--
2.37.2
