> Le 21/06/2022 à 08:37, Neal Liu a écrit :
> > Hash and Crypto Engine (HACE) is designed to accelerate the throughput
> > of hash data digest, encryption, and decryption.
> >
> > Basically, HACE can be divided into two independently engines
> > - Hash Engine and Crypto Engine. This patch aims to add HACE hash
> > engine driver for hash accelerator.
> >
> > Signed-off-by: Neal Liu
> > <neal_liu-SAlXDmAnmOAqDJ6do+/SaQ@xxxxxxxxxxxxxxxx>
> > Signed-off-by: Johnny Huang
> > <johnny_huang-SAlXDmAnmOAqDJ6do+/SaQ@xxxxxxxxxxxxxxxx>
> > ---
>
> [...]
>
> > +++ b/drivers/crypto/aspeed/Kconfig
> > @@ -0,0 +1,23 @@
> > +config CRYPTO_DEV_ASPEED
> > + tristate "Support for Aspeed cryptographic engine driver"
> > + depends on ARCH_ASPEED
> > + help
> > + Hash and Crypto Engine (HACE) is designed to accelerate the
> > + throughput of hash data digest, encryption and decryption.
> > +
> > + Select y here to have support for the cryptographic driver
> > + available on Aspeed SoC.
> > +
> > +config CRYPTO_DEV_ASPEED_HACE_HASH
> > + bool "Enable ASPEED Hash & Crypto Engine (HACE) hash"
>
> Nit: Sometimes you have ASPEED, sometimes you have Aspeed. (see a few lines
> above)
>
I'll align it for next patch.
> [...]
>
> > +static int aspeed_ahash_req_update(struct aspeed_hace_dev *hace_dev)
> > +{
> > + struct aspeed_engine_hash *hash_engine = &hace_dev->hash_engine;
> > + struct ahash_request *req = hash_engine->req;
> > + struct aspeed_sham_reqctx *rctx = ahash_request_ctx(req);
> > + aspeed_hace_fn_t resume;
> > +
> > + AHASH_DBG(hace_dev, "\n");
> > +
> > + if (hace_dev->version == AST2600_VERSION) {
> > + rctx->cmd |= HASH_CMD_HASH_SRC_SG_CTRL;
> > + resume = aspeed_ahash_update_resume_sg;
> > +
> > + } else {
> > + resume = aspeed_ahash_update_resume;
> > + }
> > +
> > + hash_engine->dma_prepare(hace_dev);
>
> Apparently dma_prepare() can fail. Should there be some error handling here?
Yes, it should. I'll add it for next patch.
>
> > +
> > + return aspeed_hace_ahash_trigger(hace_dev, resume); }
> > +
>
> [...]
>
> > +static int aspeed_hace_probe(struct platform_device *pdev) {
> > + const struct of_device_id *hace_dev_id;
> > + struct aspeed_engine_hash *hash_engine;
> > + struct aspeed_hace_dev *hace_dev;
> > + struct resource *res;
> > + int rc;
> > +
> > + hace_dev = devm_kzalloc(&pdev->dev, sizeof(struct aspeed_hace_dev),
> > + GFP_KERNEL);
> > + if (!hace_dev)
> > + return -ENOMEM;
> > +
> > + hace_dev_id = of_match_device(aspeed_hace_of_matches, &pdev->dev);
> > + if (!hace_dev_id) {
> > + dev_err(&pdev->dev, "Failed to match hace dev id\n");
> > + return -EINVAL;
> > + }
> > +
> > + hace_dev->dev = &pdev->dev;
> > + hace_dev->version = (unsigned long)hace_dev_id->data;
> > + hash_engine = &hace_dev->hash_engine;
> > +
> > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > +
> > + platform_set_drvdata(pdev, hace_dev);
> > +
> > + /* Initialize crypto hardware engine structure for hash */
> > + hace_dev->crypt_engine_hash = crypto_engine_alloc_init(hace_dev->dev,
> > + true);
>
> This returns NULL on error and crypto_engine_start() will crash in such a case.
I'll revise it also, thanks.
>
> > +
> > + rc = crypto_engine_start(hace_dev->crypt_engine_hash);
> > + if (rc)
> > + goto err_engine_hash_start;
> > +
> > + tasklet_init(&hash_engine->done_task, aspeed_hace_hash_done_task,
> > + (unsigned long)hace_dev);
> > +
> > + hace_dev->regs = devm_ioremap_resource(&pdev->dev, res);
> > + if (!hace_dev->regs) {
> > + dev_err(&pdev->dev, "Failed to map resources\n");
> > + return -ENOMEM;
>
> I think that all direct returns from here to the end of the function should be
> "goto err_engine_hash_start;".
I'll move crypto engine start stuffs to below, so all these returns can stay the same.
>
> > + }
> > +
> > + /* Get irq number and register it */
> > + hace_dev->irq = platform_get_irq(pdev, 0);
> > + if (!hace_dev->irq) {
> > + dev_err(&pdev->dev, "Failed to get interrupt\n");
> > + return -ENXIO;
> > + }
> > +
> > + rc = devm_request_irq(&pdev->dev, hace_dev->irq, aspeed_hace_irq, 0,
> > + dev_name(&pdev->dev), hace_dev);
> > + if (rc) {
> > + dev_err(&pdev->dev, "Failed to request interrupt\n");
> > + return rc;
> > + }
> > +
> > + /* Get clk and enable it */
> > + hace_dev->clk = devm_clk_get(&pdev->dev, NULL);
> > + if (IS_ERR(hace_dev->clk)) {
> > + dev_err(&pdev->dev, "Failed to get clk\n");
> > + return -ENODEV;
> > + }
> > +
> > + rc = clk_prepare_enable(hace_dev->clk);
> > + if (rc) {
> > + dev_err(&pdev->dev, "Failed to enable clock 0x%x\n", rc);
> > + return rc;
> > + }
> > +
> > + /* Allocate DMA buffer for hash engine input used */
> > + hash_engine->ahash_src_addr =
> > + dma_alloc_coherent(&pdev->dev,
> > + ASPEED_HASH_SRC_DMA_BUF_LEN,
> > + &hash_engine->ahash_src_dma_addr,
> > + GFP_KERNEL);
>
> Most of the resources are devm_'ed. Does it make sense to use
> dmam_alloc_coherent() here to simplify the .remove function?
Thanks for the suggestion. I'll use dmam_alloc_coherent() instead.
>
> > + if (!hash_engine->ahash_src_addr) {
> > + dev_err(&pdev->dev, "Failed to allocate dma buffer\n");
> > + rc = -ENOMEM;
> > + goto clk_exit;
> > + }
> > +
> > + aspeed_hace_register(hace_dev);
> > +
> > + dev_info(&pdev->dev, "ASPEED Crypto Accelerator successfully
> > +registered\n");
> > +
> Nit: Sometimes you have ASPEED, sometimes you have Aspeed.
>
Same here.
> > + return rc;
> > +
> > +clk_exit:
> > + clk_disable_unprepare(hace_dev->clk);
> > +err_engine_hash_start:
> > + crypto_engine_exit(hace_dev->crypt_engine_hash);
> > +
> > + return rc;
> > +}
> > +
>
> [...]
>
> > +MODULE_AUTHOR("Neal Liu
> > +<neal_liu-SAlXDmAnmOAqDJ6do+/SaQ@xxxxxxxxxxxxxxxx>");
> > +MODULE_DESCRIPTION("ASPEED HACE driver Crypto Accelerator");
>
> Nit: Sometimes you have ASPEED, sometimes you have Aspeed.
Same here.
