Hi, On Thu, May 19, 2022 at 04:14:11PM -0500, Rob Herring wrote: > Now that the schema tools can extract type information for all > properties (in order to decode dtb files), finding properties missing > any type definition is fairly trivial though not yet automated. > > Fix the various property schemas which are missing a type. Most of these > tend to be device specific properties which don't have a vendor prefix. > A vendor prefix is how we normally ensure a type is defined. > > Signed-off-by: Rob Herring <robh@xxxxxxxxxx> > --- > .../arm/hisilicon/controller/hip04-bootwrapper.yaml | 5 +++-- > .../bindings/display/bridge/toshiba,tc358768.yaml | 1 + > .../devicetree/bindings/display/panel/panel-timing.yaml | 5 +++++ > .../bindings/display/panel/raydium,rm67191.yaml | 1 + > .../bindings/display/panel/samsung,s6e8aa0.yaml | 1 + > .../devicetree/bindings/gpio/fairchild,74hc595.yaml | 1 + > .../devicetree/bindings/input/google,cros-ec-keyb.yaml | 1 + > .../devicetree/bindings/input/matrix-keymap.yaml | 4 ++++ > Documentation/devicetree/bindings/media/i2c/adv7604.yaml | 3 ++- > Documentation/devicetree/bindings/mux/reg-mux.yaml | 8 ++++++-- > Documentation/devicetree/bindings/net/cdns,macb.yaml | 1 + > Documentation/devicetree/bindings/net/ingenic,mac.yaml | 1 + > .../devicetree/bindings/net/ti,davinci-mdio.yaml | 1 + > .../devicetree/bindings/net/wireless/ti,wlcore.yaml | 2 ++ > .../devicetree/bindings/pci/snps,dw-pcie-ep.yaml | 6 ++++-- > Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml | 2 ++ > .../devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml | 2 ++ > Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml | 1 + > .../devicetree/bindings/power/supply/battery.yaml | 7 ++++++- > .../devicetree/bindings/power/supply/charger-manager.yaml | 1 + > Documentation/devicetree/bindings/rng/st,stm32-rng.yaml | 1 + > Documentation/devicetree/bindings/serial/8250.yaml | 1 + > .../devicetree/bindings/sound/audio-graph-card2.yaml | 3 +++ > .../devicetree/bindings/sound/imx-audio-hdmi.yaml | 3 +++ > Documentation/devicetree/bindings/usb/smsc,usb3503.yaml | 1 + > 25 files changed, 55 insertions(+), 8 deletions(-) For power-supply: Acked-by: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx> -- Sebastian > > diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/hip04-bootwrapper.yaml b/Documentation/devicetree/bindings/arm/hisilicon/controller/hip04-bootwrapper.yaml > index 7378159e61df..483caf0ce25b 100644 > --- a/Documentation/devicetree/bindings/arm/hisilicon/controller/hip04-bootwrapper.yaml > +++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/hip04-bootwrapper.yaml > @@ -17,14 +17,15 @@ properties: > - const: hisilicon,hip04-bootwrapper > > boot-method: > + $ref: /schemas/types.yaml#/definitions/uint32-array > description: | > Address and size of boot method. > [0]: bootwrapper physical address > [1]: bootwrapper size > [2]: relocation physical address > [3]: relocation size > - minItems: 1 > - maxItems: 2 > + minItems: 2 > + maxItems: 4 > > required: > - compatible > diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml > index 3bd670b8e5cd..0b6f5bef120f 100644 > --- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml > +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml > @@ -58,6 +58,7 @@ properties: > > properties: > data-lines: > + $ref: /schemas/types.yaml#/definitions/uint32 > enum: [ 16, 18, 24 ] > > port@1: > diff --git a/Documentation/devicetree/bindings/display/panel/panel-timing.yaml b/Documentation/devicetree/bindings/display/panel/panel-timing.yaml > index 7749de95ee40..229e3b36ee29 100644 > --- a/Documentation/devicetree/bindings/display/panel/panel-timing.yaml > +++ b/Documentation/devicetree/bindings/display/panel/panel-timing.yaml > @@ -146,6 +146,7 @@ properties: > Horizontal sync pulse. > 0 selects active low, 1 selects active high. > If omitted then it is not used by the hardware > + $ref: /schemas/types.yaml#/definitions/uint32 > enum: [0, 1] > > vsync-active: > @@ -153,6 +154,7 @@ properties: > Vertical sync pulse. > 0 selects active low, 1 selects active high. > If omitted then it is not used by the hardware > + $ref: /schemas/types.yaml#/definitions/uint32 > enum: [0, 1] > > de-active: > @@ -160,6 +162,7 @@ properties: > Data enable. > 0 selects active low, 1 selects active high. > If omitted then it is not used by the hardware > + $ref: /schemas/types.yaml#/definitions/uint32 > enum: [0, 1] > > pixelclk-active: > @@ -169,6 +172,7 @@ properties: > sample data on rising edge. > Use 1 to drive pixel data on rising edge and > sample data on falling edge > + $ref: /schemas/types.yaml#/definitions/uint32 > enum: [0, 1] > > syncclk-active: > @@ -179,6 +183,7 @@ properties: > sample sync on rising edge of pixel clock. > Use 1 to drive sync on rising edge and > sample sync on falling edge of pixel clock > + $ref: /schemas/types.yaml#/definitions/uint32 > enum: [0, 1] > > interlaced: > diff --git a/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml b/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml > index 745dd247c409..617aa8c8c03a 100644 > --- a/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml > +++ b/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml > @@ -24,6 +24,7 @@ properties: > > dsi-lanes: > description: Number of DSI lanes to be used must be <3> or <4> > + $ref: /schemas/types.yaml#/definitions/uint32 > enum: [3, 4] > > v3p3-supply: > diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml > index ca959451557e..1cdc91b3439f 100644 > --- a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml > +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml > @@ -36,6 +36,7 @@ properties: > > init-delay: > description: delay after initialization sequence [ms] > + $ref: /schemas/types.yaml#/definitions/uint32 > > panel-width-mm: > description: physical panel width [mm] > diff --git a/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml b/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml > index 5fe19fa5f67c..a99e7842ca17 100644 > --- a/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml > +++ b/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml > @@ -26,6 +26,7 @@ properties: > const: 2 > > registers-number: > + $ref: /schemas/types.yaml#/definitions/uint32 > description: Number of daisy-chained shift registers > > enable-gpios: > diff --git a/Documentation/devicetree/bindings/input/google,cros-ec-keyb.yaml b/Documentation/devicetree/bindings/input/google,cros-ec-keyb.yaml > index e8f137abb03c..aa61fe64be63 100644 > --- a/Documentation/devicetree/bindings/input/google,cros-ec-keyb.yaml > +++ b/Documentation/devicetree/bindings/input/google,cros-ec-keyb.yaml > @@ -31,6 +31,7 @@ properties: > type: boolean > > function-row-physmap: > + $ref: /schemas/types.yaml#/definitions/uint32-array > minItems: 1 > maxItems: 15 > description: | > diff --git a/Documentation/devicetree/bindings/input/matrix-keymap.yaml b/Documentation/devicetree/bindings/input/matrix-keymap.yaml > index 6699d5e32dca..9f703bb51e12 100644 > --- a/Documentation/devicetree/bindings/input/matrix-keymap.yaml > +++ b/Documentation/devicetree/bindings/input/matrix-keymap.yaml > @@ -27,6 +27,10 @@ properties: > column and linux key-code. The 32-bit big endian cell is packed as: > row << 24 | column << 16 | key-code > > + linux,no-autorepeat: > + type: boolean > + description: Disable keyrepeat > + > keypad,num-rows: > $ref: /schemas/types.yaml#/definitions/uint32 > description: Number of row lines connected to the keypad controller. > diff --git a/Documentation/devicetree/bindings/media/i2c/adv7604.yaml b/Documentation/devicetree/bindings/media/i2c/adv7604.yaml > index c19d8391e2d5..7589d377c686 100644 > --- a/Documentation/devicetree/bindings/media/i2c/adv7604.yaml > +++ b/Documentation/devicetree/bindings/media/i2c/adv7604.yaml > @@ -60,7 +60,8 @@ properties: > enables hot-plug detection. > > default-input: > - maxItems: 1 > + $ref: /schemas/types.yaml#/definitions/uint32 > + enum: [ 0, 1 ] > description: > Select which input is selected after reset. > > diff --git a/Documentation/devicetree/bindings/mux/reg-mux.yaml b/Documentation/devicetree/bindings/mux/reg-mux.yaml > index 60d5746eb39d..e2f6b11f1254 100644 > --- a/Documentation/devicetree/bindings/mux/reg-mux.yaml > +++ b/Documentation/devicetree/bindings/mux/reg-mux.yaml > @@ -25,8 +25,12 @@ properties: > const: 1 > > mux-reg-masks: > - description: an array of register offset and pre-shifted bitfield mask > - pairs, each describing a single mux control. > + $ref: /schemas/types.yaml#/definitions/uint32-matrix > + items: > + items: > + - description: register offset > + - description: pre-shifted bitfield mask > + description: Each entry describes a single mux control. > > idle-states: true > > diff --git a/Documentation/devicetree/bindings/net/cdns,macb.yaml b/Documentation/devicetree/bindings/net/cdns,macb.yaml > index 6cd3d853dcba..59fe2789fa44 100644 > --- a/Documentation/devicetree/bindings/net/cdns,macb.yaml > +++ b/Documentation/devicetree/bindings/net/cdns,macb.yaml > @@ -129,6 +129,7 @@ patternProperties: > reset-gpios: true > > magic-packet: > + type: boolean > description: > Indicates that the hardware supports waking up via magic packet. > > diff --git a/Documentation/devicetree/bindings/net/ingenic,mac.yaml b/Documentation/devicetree/bindings/net/ingenic,mac.yaml > index 8e52b2e683b8..93b3e991d209 100644 > --- a/Documentation/devicetree/bindings/net/ingenic,mac.yaml > +++ b/Documentation/devicetree/bindings/net/ingenic,mac.yaml > @@ -37,6 +37,7 @@ properties: > const: stmmaceth > > mode-reg: > + $ref: /schemas/types.yaml#/definitions/phandle > description: An extra syscon register that control ethernet interface and timing delay > > rx-clk-delay-ps: > diff --git a/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml b/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml > index 6f44f9516c36..a339202c5e8e 100644 > --- a/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml > +++ b/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml > @@ -34,6 +34,7 @@ properties: > maxItems: 1 > > bus_freq: > + $ref: /schemas/types.yaml#/definitions/uint32 > maximum: 2500000 > description: MDIO Bus frequency > > diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml > index 8dd164d10290..d68bb2ec1f7e 100644 > --- a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml > +++ b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml > @@ -54,9 +54,11 @@ properties: > > > ref-clock-frequency: > + $ref: /schemas/types.yaml#/definitions/uint32 > description: Reference clock frequency. > > tcxo-clock-frequency: > + $ref: /schemas/types.yaml#/definitions/uint32 > description: TCXO clock frequency. > > clock-xtal: > diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml > index e59059ab5be0..b78535040f04 100644 > --- a/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml > +++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml > @@ -55,13 +55,15 @@ properties: > Translation Unit) registers. > > num-ib-windows: > + $ref: /schemas/types.yaml#/definitions/uint32 > + maximum: 256 > description: number of inbound address translation windows > - maxItems: 1 > deprecated: true > > num-ob-windows: > + $ref: /schemas/types.yaml#/definitions/uint32 > + maximum: 256 > description: number of outbound address translation windows > - maxItems: 1 > deprecated: true > > required: > diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml > index a5345c494744..c90e5e2d25f6 100644 > --- a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml > +++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml > @@ -68,6 +68,8 @@ properties: > Translation Unit) registers. > > num-viewport: > + $ref: /schemas/types.yaml#/definitions/uint32 > + maximum: 256 > description: | > number of view ports configured in hardware. If a platform > does not specify it, the driver autodetects it. > diff --git a/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml b/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml > index 53e963e090f2..533b4cfe33d2 100644 > --- a/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml > @@ -120,6 +120,7 @@ patternProperties: > input-schmitt-disable: true > > input-polarity-invert: > + type: boolean > description: > Enable or disable pin input polarity inversion. > > @@ -132,6 +133,7 @@ patternProperties: > output-low: true > > output-polarity-invert: > + type: boolean > description: > Enable or disable pin output polarity inversion. > > diff --git a/Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml b/Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml > index 3301fa0c2653..301db7daf870 100644 > --- a/Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml > +++ b/Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml > @@ -51,6 +51,7 @@ properties: > supported by the CPR power domain. > > acc-syscon: > + $ref: /schemas/types.yaml#/definitions/phandle > description: A phandle to the syscon used for writing ACC settings. > > nvmem-cells: > diff --git a/Documentation/devicetree/bindings/power/supply/battery.yaml b/Documentation/devicetree/bindings/power/supply/battery.yaml > index d56ac484fec5..491488e7b970 100644 > --- a/Documentation/devicetree/bindings/power/supply/battery.yaml > +++ b/Documentation/devicetree/bindings/power/supply/battery.yaml > @@ -85,8 +85,13 @@ properties: > description: battery factory internal resistance > > resistance-temp-table: > + $ref: /schemas/types.yaml#/definitions/uint32-matrix > + items: > + items: > + - description: the temperature in degree Celsius > + - description: battery internal resistance percent > description: | > - An array providing the temperature in degree Celsius > + A table providing the temperature in degree Celsius > and corresponding battery internal resistance percent, which is used to > look up the resistance percent according to current temperature to get an > accurate batterty internal resistance in different temperatures. > diff --git a/Documentation/devicetree/bindings/power/supply/charger-manager.yaml b/Documentation/devicetree/bindings/power/supply/charger-manager.yaml > index c863cfa67865..fbb2204769aa 100644 > --- a/Documentation/devicetree/bindings/power/supply/charger-manager.yaml > +++ b/Documentation/devicetree/bindings/power/supply/charger-manager.yaml > @@ -36,6 +36,7 @@ properties: > > cm-poll-mode: > description: polling mode > + $ref: /schemas/types.yaml#/definitions/uint32 > default: 0 > enum: > - 0 # disabled > diff --git a/Documentation/devicetree/bindings/rng/st,stm32-rng.yaml b/Documentation/devicetree/bindings/rng/st,stm32-rng.yaml > index 9a6e4eaf4d3c..fcd86f822a9c 100644 > --- a/Documentation/devicetree/bindings/rng/st,stm32-rng.yaml > +++ b/Documentation/devicetree/bindings/rng/st,stm32-rng.yaml > @@ -27,6 +27,7 @@ properties: > maxItems: 1 > > clock-error-detect: > + type: boolean > description: If set enable the clock detection management > > required: > diff --git a/Documentation/devicetree/bindings/serial/8250.yaml b/Documentation/devicetree/bindings/serial/8250.yaml > index 3bab2f27b970..5f6b113d378f 100644 > --- a/Documentation/devicetree/bindings/serial/8250.yaml > +++ b/Documentation/devicetree/bindings/serial/8250.yaml > @@ -138,6 +138,7 @@ properties: > description: The current active speed of the UART. > > reg-offset: > + $ref: /schemas/types.yaml#/definitions/uint32 > description: | > Offset to apply to the mapbase from the start of the registers. > > diff --git a/Documentation/devicetree/bindings/sound/audio-graph-card2.yaml b/Documentation/devicetree/bindings/sound/audio-graph-card2.yaml > index f7e94b1e0e4b..7416067c945e 100644 > --- a/Documentation/devicetree/bindings/sound/audio-graph-card2.yaml > +++ b/Documentation/devicetree/bindings/sound/audio-graph-card2.yaml > @@ -24,10 +24,13 @@ properties: > connection's sink, the second being the connection's source. > $ref: /schemas/types.yaml#/definitions/non-unique-string-array > multi: > + type: object > description: Multi-CPU/Codec node > dpcm: > + type: object > description: DPCM node > codec2codec: > + type: object > description: Codec to Codec node > > required: > diff --git a/Documentation/devicetree/bindings/sound/imx-audio-hdmi.yaml b/Documentation/devicetree/bindings/sound/imx-audio-hdmi.yaml > index d5474f83ac2c..e7e7bb65c366 100644 > --- a/Documentation/devicetree/bindings/sound/imx-audio-hdmi.yaml > +++ b/Documentation/devicetree/bindings/sound/imx-audio-hdmi.yaml > @@ -20,9 +20,11 @@ properties: > description: User specified audio sound card name > > audio-cpu: > + $ref: /schemas/types.yaml#/definitions/phandle > description: The phandle of an CPU DAI controller > > hdmi-out: > + type: boolean > description: | > This is a boolean property. If present, the transmitting function > of HDMI will be enabled, indicating there's a physical HDMI out > @@ -30,6 +32,7 @@ properties: > block, such as an HDMI encoder or display-controller. > > hdmi-in: > + type: boolean > description: | > This is a boolean property. If present, the receiving function of > HDMI will be enabled, indicating there is a physical HDMI in > diff --git a/Documentation/devicetree/bindings/usb/smsc,usb3503.yaml b/Documentation/devicetree/bindings/usb/smsc,usb3503.yaml > index b9e219829801..321b6f166197 100644 > --- a/Documentation/devicetree/bindings/usb/smsc,usb3503.yaml > +++ b/Documentation/devicetree/bindings/usb/smsc,usb3503.yaml > @@ -45,6 +45,7 @@ properties: > property if all ports have to be enabled. > > initial-mode: > + $ref: /schemas/types.yaml#/definitions/uint32 > enum: [1, 2] > description: > > Specifies initial mode. 1 for Hub mode, 2 for standby mode. > -- > 2.34.1 >
Attachment:
signature.asc
Description: PGP signature
