On Fri, 2022-04-15 at 22:56 +0200, Ahmad Fatoum wrote:
> The NXP Cryptographic Acceleration and Assurance Module (CAAM)
> can be used to protect user-defined data across system reboot:
>
> - When the system is fused and boots into secure state, the master
> key is a unique never-disclosed device-specific key
> - random key is encrypted by key derived from master key
> - data is encrypted using the random key
> - encrypted data and its encrypted random key are stored alongside
> - This blob can now be safely stored in non-volatile memory
>
> On next power-on:
> - blob is loaded into CAAM
> - CAAM writes decrypted data either into memory or key register
>
> Add functions to realize encrypting and decrypting into memory alongside
> the CAAM driver.
>
> They will be used in a later commit as a source for the trusted key
> seal/unseal mechanism.
>
> Reviewed-by: David Gstir <david@xxxxxxxxxxxxx>
> Reviewed-by: Pankaj Gupta <pankaj.gupta@xxxxxxx>
> Tested-by: Tim Harvey <tharvey@xxxxxxxxxxxxx>
> Tested-by: Matthias Schiffer <matthias.schiffer@xxxxxxxxxxxxxxx>
> Signed-off-by: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
> Signed-off-by: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
> ---
> v6 -> v7:
> - Added more verbose comment on how CAAM_BLOB_DESC_BYTES_MAX adds up.
> - remove error message on kzalloc failure (checkpatch)
> - Replaced buffer arguments with structure containing them (Pankaj)
> v5 -> v6:
> - Dropped caam_blob_alloc_desc() in favor of kzalloc() with fixed size.
> This simplifies code and wastes at most 12 bytes which are freed
> at the end of the function anyway.
> - Factored out common code between caam_encap_blob and caam_decap_blob
> as both functions were largely identical
> - use append_seq_(in|out)_ptr_intlen for both encap/decap as a result
> - use reverse christmas tree order for caam_process_blob variable
> definitions.
> v4 -> v5:
> - Collected Reviewed-by's and Tested-by's
> - Note in CAAM patch what CAAM is (Jarkko)
> v3 -> v4:
> - Collected Acked-by's, Reviewed-by's and Tested-by
> - Fixed typo spotted by David
> v2 -> v3:
> - No change
> v1 -> v2:
> - Enforce maximum keymod size (Horia)
> - Use append_seq_(in|out)_ptr_intlen instead of append_seq_(in|out)_ptr
> (Horia)
> - Make blobifier handle private to CAAM glue code file (Horia)
>
> To: "Horia Geantă" <horia.geanta@xxxxxxx>
> To: Pankaj Gupta <pankaj.gupta@xxxxxxx>
> To: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
> To: "David S. Miller" <davem@xxxxxxxxxxxxx>
> Cc: James Bottomley <jejb@xxxxxxxxxxxxx>
> Cc: Jarkko Sakkinen <jarkko@xxxxxxxxxx>
> Cc: Mimi Zohar <zohar@xxxxxxxxxxxxx>
> Cc: David Howells <dhowells@xxxxxxxxxx>
> Cc: James Morris <jmorris@xxxxxxxxx>
> Cc: Eric Biggers <ebiggers@xxxxxxxxxx>
> Cc: "Serge E. Hallyn" <serge@xxxxxxxxxx>
> Cc: Jan Luebbe <j.luebbe@xxxxxxxxxxxxxx>
> Cc: David Gstir <david@xxxxxxxxxxxxx>
> Cc: Richard Weinberger <richard@xxxxxx>
> Cc: Franck LENORMAND <franck.lenormand@xxxxxxx>
> Cc: Matthias Schiffer <matthias.schiffer@xxxxxxxxxxxxxxx>
> Cc: Sumit Garg <sumit.garg@xxxxxxxxxx>
> Cc: linux-integrity@xxxxxxxxxxxxxxx
> Cc: keyrings@xxxxxxxxxxxxxxx
> Cc: linux-crypto@xxxxxxxxxxxxxxx
> Cc: linux-kernel@xxxxxxxxxxxxxxx
> Cc: linux-security-module@xxxxxxxxxxxxxxx
> ---
> drivers/crypto/caam/Kconfig | 3 +
> drivers/crypto/caam/Makefile | 1 +
> drivers/crypto/caam/blob_gen.c | 164 +++++++++++++++++++++++++++++++++
> include/soc/fsl/caam-blob.h | 102 ++++++++++++++++++++
> 4 files changed, 270 insertions(+)
> create mode 100644 drivers/crypto/caam/blob_gen.c
> create mode 100644 include/soc/fsl/caam-blob.h
>
> diff --git a/drivers/crypto/caam/Kconfig b/drivers/crypto/caam/Kconfig
> index 84ea7cba5ee5..ea9f8b1ae981 100644
> --- a/drivers/crypto/caam/Kconfig
> +++ b/drivers/crypto/caam/Kconfig
> @@ -151,6 +151,9 @@ config CRYPTO_DEV_FSL_CAAM_RNG_API
> Selecting this will register the SEC4 hardware rng to
> the hw_random API for supplying the kernel entropy pool.
>
> +config CRYPTO_DEV_FSL_CAAM_BLOB_GEN
> + bool
> +
> endif # CRYPTO_DEV_FSL_CAAM_JR
>
> endif # CRYPTO_DEV_FSL_CAAM
> diff --git a/drivers/crypto/caam/Makefile b/drivers/crypto/caam/Makefile
> index 3570286eb9ce..25f7ae5a4642 100644
> --- a/drivers/crypto/caam/Makefile
> +++ b/drivers/crypto/caam/Makefile
> @@ -21,6 +21,7 @@ caam_jr-$(CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_QI) += caamalg_qi.o
> caam_jr-$(CONFIG_CRYPTO_DEV_FSL_CAAM_AHASH_API) += caamhash.o
> caam_jr-$(CONFIG_CRYPTO_DEV_FSL_CAAM_RNG_API) += caamrng.o
> caam_jr-$(CONFIG_CRYPTO_DEV_FSL_CAAM_PKC_API) += caampkc.o pkc_desc.o
> +caam_jr-$(CONFIG_CRYPTO_DEV_FSL_CAAM_BLOB_GEN) += blob_gen.o
>
> caam-$(CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_QI) += qi.o
> ifneq ($(CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_QI),)
> diff --git a/drivers/crypto/caam/blob_gen.c b/drivers/crypto/caam/blob_gen.c
> new file mode 100644
> index 000000000000..f166937fcfeb
> --- /dev/null
> +++ b/drivers/crypto/caam/blob_gen.c
> @@ -0,0 +1,164 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2015 Pengutronix, Steffen Trumtrar <kernel@xxxxxxxxxxxxxx>
> + * Copyright (C) 2021 Pengutronix, Ahmad Fatoum <kernel@xxxxxxxxxxxxxx>
> + */
> +
> +#include <linux/device.h>
> +#include <soc/fsl/caam-blob.h>
> +
> +#include "compat.h"
> +#include "desc_constr.h"
> +#include "desc.h"
> +#include "error.h"
> +#include "intern.h"
> +#include "jr.h"
> +#include "regs.h"
> +
> +#define CAAM_BLOB_DESC_BYTES_MAX \
> + /* Command to initialize & stating length of descriptor */ \
> + (CAAM_CMD_SZ + \
> + /* Command to append the key-modifier + key-modifier data */ \
> + CAAM_CMD_SZ + CAAM_BLOB_KEYMOD_LENGTH + \
> + /* Command to include input key + pointer to the input key */ \
> + CAAM_CMD_SZ + CAAM_PTR_SZ_MAX + \
> + /* Command to include output key + pointer to the output key */ \
> + CAAM_CMD_SZ + CAAM_PTR_SZ_MAX + \
> + /* Command describing the Operation to perform */ \
> + CAAM_CMD_SZ)
> +
> +struct caam_blob_priv {
> + struct device jrdev;
> +};
> +
> +struct caam_blob_job_result {
> + int err;
> + struct completion completion;
> +};
> +
> +static void caam_blob_job_done(struct device *dev, u32 *desc, u32 err, void *context)
> +{
> + struct caam_blob_job_result *res = context;
> + int ecode = 0;
> +
> + dev_dbg(dev, "%s %d: err 0x%x\n", __func__, __LINE__, err);
> +
> + if (err)
> + ecode = caam_jr_strstatus(dev, err);
> +
> + res->err = ecode;
> +
> + /*
> + * Upon completion, desc points to a buffer containing a CAAM job
> + * descriptor which encapsulates data into an externally-storable
> + * blob.
> + */
> + complete(&res->completion);
> +}
> +
> +int caam_process_blob(struct caam_blob_priv *priv,
> + struct caam_blob_info *info, bool encap)
Documentation missing (it's exported).
> +{
> + struct caam_blob_job_result testres;
> + struct device *jrdev = &priv->jrdev;
> + dma_addr_t dma_in, dma_out;
> + int op = OP_PCLID_BLOB;
> + size_t output_len;
> + u32 *desc;
> + int ret;
> +
> + if (info->key_mod_len > CAAM_BLOB_KEYMOD_LENGTH)
> + return -EINVAL;
> +
> + if (encap) {
> + op |= OP_TYPE_ENCAP_PROTOCOL;
> + output_len = info->input_len + CAAM_BLOB_OVERHEAD;
> + } else {
> + op |= OP_TYPE_DECAP_PROTOCOL;
> + output_len = info->input_len - CAAM_BLOB_OVERHEAD;
> + }
> +
> + desc = kzalloc(CAAM_BLOB_DESC_BYTES_MAX, GFP_KERNEL | GFP_DMA);
> + if (!desc)
> + return -ENOMEM;
> +
> + dma_in = dma_map_single(jrdev, info->input, info->input_len,
> + DMA_TO_DEVICE);
> + if (dma_mapping_error(jrdev, dma_in)) {
> + dev_err(jrdev, "unable to map input DMA buffer\n");
> + ret = -ENOMEM;
> + goto out_free;
> + }
> +
> + dma_out = dma_map_single(jrdev, info->output, output_len,
> + DMA_FROM_DEVICE);
> + if (dma_mapping_error(jrdev, dma_out)) {
> + dev_err(jrdev, "unable to map output DMA buffer\n");
> + ret = -ENOMEM;
> + goto out_unmap_in;
> + }
> +
> + /*
> + * A data blob is encrypted using a blob key (BK); a random number.
> + * The BK is used as an AES-CCM key. The initial block (B0) and the
> + * initial counter (Ctr0) are generated automatically and stored in
> + * Class 1 Context DWords 0+1+2+3. The random BK is stored in the
> + * Class 1 Key Register. Operation Mode is set to AES-CCM.
> + */
> +
> + init_job_desc(desc, 0);
> + append_key_as_imm(desc, info->key_mod, info->key_mod_len,
> + info->key_mod_len, CLASS_2 | KEY_DEST_CLASS_REG);
> + append_seq_in_ptr_intlen(desc, dma_in, info->input_len, 0);
> + append_seq_out_ptr_intlen(desc, dma_out, output_len, 0);
> + append_operation(desc, op);
> +
> + print_hex_dump_debug("data@"__stringify(__LINE__)": ",
> + DUMP_PREFIX_ADDRESS, 16, 1, info->input,
> + info->input_len, false);
> + print_hex_dump_debug("jobdesc@"__stringify(__LINE__)": ",
> + DUMP_PREFIX_ADDRESS, 16, 1, desc,
> + desc_bytes(desc), false);
> +
> + testres.err = 0;
> + init_completion(&testres.completion);
> +
> + ret = caam_jr_enqueue(jrdev, desc, caam_blob_job_done, &testres);
> + if (ret == -EINPROGRESS) {
> + wait_for_completion(&testres.completion);
> + ret = testres.err;
> + print_hex_dump_debug("output@"__stringify(__LINE__)": ",
> + DUMP_PREFIX_ADDRESS, 16, 1, info->output,
> + output_len, false);
> + }
> +
> + if (ret == 0)
> + info->output_len = output_len;
> +
> + dma_unmap_single(jrdev, dma_out, output_len, DMA_FROM_DEVICE);
> +out_unmap_in:
> + dma_unmap_single(jrdev, dma_in, info->input_len, DMA_TO_DEVICE);
> +out_free:
> + kfree(desc);
> +
> + return ret;
> +}
> +EXPORT_SYMBOL(caam_process_blob);
> +
> +struct caam_blob_priv *caam_blob_gen_init(void)
> +{
> + struct device *jrdev;
> +
> + jrdev = caam_jr_alloc();
> + if (IS_ERR(jrdev))
> + return ERR_CAST(jrdev);
> +
> + return container_of(jrdev, struct caam_blob_priv, jrdev);
> +}
> +EXPORT_SYMBOL(caam_blob_gen_init);
> +
> +void caam_blob_gen_exit(struct caam_blob_priv *priv)
> +{
> + caam_jr_free(&priv->jrdev);
> +}
> +EXPORT_SYMBOL(caam_blob_gen_exit);
> diff --git a/include/soc/fsl/caam-blob.h b/include/soc/fsl/caam-blob.h
> new file mode 100644
> index 000000000000..0be0ab2da5c7
> --- /dev/null
> +++ b/include/soc/fsl/caam-blob.h
> @@ -0,0 +1,102 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (C) 2020 Pengutronix, Ahmad Fatoum <kernel@xxxxxxxxxxxxxx>
> + */
> +
> +#ifndef __CAAM_BLOB_GEN
> +#define __CAAM_BLOB_GEN
> +
> +#include <linux/types.h>
> +#include <linux/errno.h>
> +
> +#define CAAM_BLOB_KEYMOD_LENGTH 16
> +#define CAAM_BLOB_OVERHEAD (32 + 16)
> +#define CAAM_BLOB_MAX_LEN 4096
> +
> +struct caam_blob_priv;
> +
> +/** struct caam_blob_info - information for CAAM blobbing
> + *
You can remove this extra line, applies to some functions in the patch
too.
> + * @input: pointer to input buffer (must be DMAable)
> + * @input_len: length of @input buffer in bytes.
> + * @output: pointer to output buffer (must be DMAable)
> + * @output_len: length of @output buffer in bytes.
> + * @key_mod: key modifier
> + * @key_mod_len: length of @key_mod in bytes.
> + * May not exceed CAAM_BLOB_KEYMOD_LENGTH
> + */
> +struct caam_blob_info {
> + void *input;
> + size_t input_len;
> +
> + void *output;
> + size_t output_len;
> +
> + const void *key_mod;
> + size_t key_mod_len;
> +};
> +
> +/** caam_blob_gen_init - initialize blob generation
> + *
> + * returns either pointer to new caam_blob_priv instance
> + * or error pointer
> + */
> +struct caam_blob_priv *caam_blob_gen_init(void);
> +
> +/** caam_blob_gen_exit - free blob generation resources
> + *
> + * @priv: instance returned by caam_blob_gen_init
> + */
> +void caam_blob_gen_exit(struct caam_blob_priv *priv);
> +
> +/** caam_process_blob - encapsulate or decapsulate blob
> + *
> + * @priv: instance returned by caam_blob_gen_init
> + * @info: pointer to blobbing info describing key, blob and
> + * key modifier buffers.
> + * @encap: true for encapsulation, false for decapsulation
> + *
> + * returns 0 and sets info->output_len on success and returns
> + * a negative error code otherwise.
> + */
> +int caam_process_blob(struct caam_blob_priv *priv,
> + struct caam_blob_info *info, bool blob);
> +
> +/** caam_encap_blob - encapsulate blob
> + *
> + * @priv: instance returned by caam_blob_gen_init
> + * @info: pointer to blobbing info describing input key,
> + * output blob and key modifier buffers.
> + *
> + * returns 0 and sets info->output_len on success and returns
> + * a negative error code otherwise.
> + */
> +static inline int caam_encap_blob(struct caam_blob_priv *priv,
> + struct caam_blob_info *info)
> +{
> + if (info->output_len < info->input_len + CAAM_BLOB_OVERHEAD)
> + return -EINVAL;
> +
> + return caam_process_blob(priv, info, true);
> +}
> +
> +/** caam_decap_blob - decapsulate blob
> + *
> + * @priv: instance returned by caam_blob_gen_init
> + * @info: pointer to blobbing info describing output key,
> + * input blob and key modifier buffers.
> + *
> + * returns 0 and sets info->output_len on success and returns
> + * a negative error code otherwise.
> + */
> +static inline int caam_decap_blob(struct caam_blob_priv *priv,
> + struct caam_blob_info *info)
> +{
> + if (info->input_len < CAAM_BLOB_OVERHEAD ||
> + info->output_len < info->input_len - CAAM_BLOB_OVERHEAD)
> + return -EINVAL;
> +
> + return caam_process_blob(priv, info, false);
> +}
> +
> +#endif
BR, Jarkko
