Hello The rockchip crypto driver is broken and do not pass self-tests. This serie's goal is to permit to become usable and pass self-tests. This whole serie is tested on a rk3328-rock64, rk3288-miqi and rk3399-khadas-edge-v with selftests (with CONFIG_CRYPTO_MANAGER_EXTRA_TESTS=y) Since I didnt own rk3399 hardware, I worked on an emulated one until I grab some co-worker rk3399 board. People wanting to test this serie without the hardware can try my qemu branch at https://github.com/montjoie/qemu/tree/rkcrypto Regards Changes since v1: - select CRYPTO_ENGINE - forgot to free fallbacks TFMs - fixed kernel test robots warning - add the PM patch Changes since v2: - Added DMA clock back to 3288 since it dont work without it - fallback needed to select CBC and ECB configs - Added support for rk3399 - Added more patch (style, read_poll_timeout) Changes since v3: - full rewrite of support for RK3399 - splited dt-binding patch in two Changes since v4: - Another full rewrite of support for RK3399 - Fixed dt-binding from Krzysztof Kozlowski's comments - Use readl_poll_timeout() instead of read_poll_timeout() - Rewrite the fallback SG tests Corentin Labbe (33): crypto: rockchip: use dev_err for error message about interrupt crypto: rockchip: do not use uninitialized variable crypto: rockchip: do not do custom power management crypto: rockchip: fix privete/private typo crypto: rockchip: do not store mode globally crypto: rockchip: add fallback for cipher crypto: rockchip: add fallback for ahash crypto: rockchip: better handle cipher key crypto: rockchip: remove non-aligned handling crypto: rockchip: rework by using crypto_engine crypto: rockchip: rewrite type crypto: rockchip: add debugfs crypto: rockchip: introduce PM crypto: rockchip: handle reset also in PM crypto: rockchip: use clk_bulk to simplify clock management crypto: rockchip: add myself as maintainer crypto: rockchip: use read_poll_timeout crypto: rockchip: fix style issue crypto: rockchip: add support for rk3328 crypto: rockchip: rename ablk functions to cipher crypto: rockchip: rework rk_handle_req function crypto: rockchip: use a rk_crypto_info variable instead of lot of indirection crypto: rockchip: use the rk_crypto_info given as parameter dt-bindings: crypto: convert rockchip-crypto to YAML dt-bindings: crypto: rockchip: convert to new driver bindings clk: rk3399: use proper crypto0 name arm64: dts: rockchip: add rk3328 crypto node arm64: dts: rockchip: rk3399: add crypto node crypto: rockchip: store crypto_info in request context crypto: rockchip: Check for clocks numbers and their frequencies crypto: rockchip: rk_ahash_reg_init use crypto_info from parameter crypto: rockchip: permit to have more than one reset crypto: rockchip: Add support for RK3399 .../crypto/rockchip,rk3288-crypto.yaml | 133 +++++ .../bindings/crypto/rockchip-crypto.txt | 28 - MAINTAINERS | 7 + arch/arm64/boot/dts/rockchip/rk3328.dtsi | 11 + arch/arm64/boot/dts/rockchip/rk3399.dtsi | 20 + drivers/crypto/Kconfig | 15 + drivers/crypto/rockchip/rk3288_crypto.c | 511 ++++++++-------- drivers/crypto/rockchip/rk3288_crypto.h | 107 ++-- drivers/crypto/rockchip/rk3288_crypto_ahash.c | 267 +++++---- .../crypto/rockchip/rk3288_crypto_skcipher.c | 543 ++++++++++-------- include/dt-bindings/clock/rk3399-cru.h | 6 +- 11 files changed, 953 insertions(+), 695 deletions(-) create mode 100644 Documentation/devicetree/bindings/crypto/rockchip,rk3288-crypto.yaml delete mode 100644 Documentation/devicetree/bindings/crypto/rockchip-crypto.txt -- 2.35.1
