[no subject]

	ret = clk_set_rate(&priv->sclk, priv->frequency);

===

Could you make this portable?
Example:

	int i;

	priv->num_clks = devm_clk_bulk_get_all(dev, &priv->clks);
	if (priv->num_clks < 1)
		return -EINVAL;

	priv->sclk = NULL;
	for (i = 0; i < priv->num_clks; i++) {
		if (!strncmp(priv->clks[i].id, "sclk", 3)) {
			priv->sclk = priv->clks[i].clk;
			break;
		}
	}

	if (!priv->sclk) {
		dev_err(dev, "no sclk found\n");
		return -EINVAL;
	}

Also add optional "sclk1" clock for rk3399.
Use "sclk" and not "sclk0" to be backwards compatible.

===

Also make the resets portable for rk3399.
Remove the requirement for "reset-names".

Example:
	priv->phy_rst = devm_reset_control_array_get_exclusive(dev);
	if (IS_ERR(priv->phy_rst))
		return dev_err_probe(dev, PTR_ERR(priv->phy_rst), "failed to get phy
reset\n");



>  	crypto_info->irq = platform_get_irq(pdev, 0);
>  	if (crypto_info->irq < 0) {
>  		dev_err(&pdev->dev, "control Interrupt is not available.\n");
> diff --git a/drivers/crypto/rockchip/rk3288_crypto.h b/drivers/crypto/rockchip/rk3288_crypto.h
> index c741e97057dc..963fbfc4d14e 100644
> --- a/drivers/crypto/rockchip/rk3288_crypto.h
> +++ b/drivers/crypto/rockchip/rk3288_crypto.h
> @@ -191,7 +191,6 @@ struct rk_crypto_info {

>  	struct clk			*aclk;
>  	struct clk			*hclk;
>  	struct clk			*sclk;
> -	struct clk			*dmaclk;


	int num_clks;
	struct clk_bulk_data *clks;
	struct clk *sclk;
	struct clk *sclk1;


>  	struct reset_control		*rst;
>  	void __iomem			*reg;
>  	int				irq;