Re: [PATCH] crypto: cleanup comments

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Feb 21, 2022 at 02:31:18PM -0800, trix@xxxxxxxxxx wrote:
> From: Tom Rix <trix@xxxxxxxxxx>
> 
> For spdx
> /* */ for *.h, // for *.c
> Space before spdx tag
> 
> Replacements
> paramenters to parameters
> aymmetric to asymmetric
> sigature to signature
> boudary to boundary
> compliled to compiled
> eninges to engines
> explicity to explicitly
> 
> Signed-off-by: Tom Rix <trix@xxxxxxxxxx>
> ---
>  crypto/asymmetric_keys/signature.c   | 2 +-
>  crypto/asymmetric_keys/x509_parser.h | 2 +-
>  crypto/async_tx/async_xor.c          | 8 ++++----
>  crypto/async_tx/raid6test.c          | 4 ++--
>  crypto/cfb.c                         | 2 +-
>  crypto/dh.c                          | 2 +-
>  crypto/sm2.c                         | 2 +-
>  7 files changed, 11 insertions(+), 11 deletions(-)
> 
> diff --git a/crypto/asymmetric_keys/signature.c b/crypto/asymmetric_keys/signature.c
> index 4aff3eebec17..2deff81f8af5 100644
> --- a/crypto/asymmetric_keys/signature.c
> +++ b/crypto/asymmetric_keys/signature.c
> @@ -35,7 +35,7 @@ void public_key_signature_free(struct public_key_signature *sig)
>  EXPORT_SYMBOL_GPL(public_key_signature_free);
>  
>  /**
> - * query_asymmetric_key - Get information about an aymmetric key.
> + * query_asymmetric_key - Get information about an asymmetric key.
>   * @params: Various parameters.
>   * @info: Where to put the information.
>   */
> diff --git a/crypto/asymmetric_keys/x509_parser.h b/crypto/asymmetric_keys/x509_parser.h
> index c233f136fb35..668f5c9f0b54 100644
> --- a/crypto/asymmetric_keys/x509_parser.h
> +++ b/crypto/asymmetric_keys/x509_parser.h
> @@ -22,7 +22,7 @@ struct x509_certificate {
>  	time64_t	valid_to;
>  	const void	*tbs;			/* Signed data */
>  	unsigned	tbs_size;		/* Size of signed data */
> -	unsigned	raw_sig_size;		/* Size of sigature */
> +	unsigned	raw_sig_size;		/* Size of signature */
>  	const void	*raw_sig;		/* Signature data */
>  	const void	*raw_serial;		/* Raw serial number in ASN.1 */
>  	unsigned	raw_serial_size;
> diff --git a/crypto/async_tx/async_xor.c b/crypto/async_tx/async_xor.c
> index d8a91521144e..1a3855284091 100644
> --- a/crypto/async_tx/async_xor.c
> +++ b/crypto/async_tx/async_xor.c
> @@ -170,8 +170,8 @@ dma_xor_aligned_offsets(struct dma_device *device, unsigned int offset,
>   *
>   * xor_blocks always uses the dest as a source so the
>   * ASYNC_TX_XOR_ZERO_DST flag must be set to not include dest data in
> - * the calculation.  The assumption with dma eninges is that they only
> - * use the destination buffer as a source when it is explicity specified
> + * the calculation.  The assumption with dma engines is that they only
> + * use the destination buffer as a source when it is explicitly specified
>   * in the source list.
>   *
>   * src_list note: if the dest is also a source it must be at index zero.
> @@ -261,8 +261,8 @@ EXPORT_SYMBOL_GPL(async_xor_offs);
>   *
>   * xor_blocks always uses the dest as a source so the
>   * ASYNC_TX_XOR_ZERO_DST flag must be set to not include dest data in
> - * the calculation.  The assumption with dma eninges is that they only
> - * use the destination buffer as a source when it is explicity specified
> + * the calculation.  The assumption with dma engines is that they only
> + * use the destination buffer as a source when it is explicitly specified
>   * in the source list.
>   *
>   * src_list note: if the dest is also a source it must be at index zero.
> diff --git a/crypto/async_tx/raid6test.c b/crypto/async_tx/raid6test.c
> index 66db82e5a3b1..c9d218e53bcb 100644
> --- a/crypto/async_tx/raid6test.c
> +++ b/crypto/async_tx/raid6test.c
> @@ -217,7 +217,7 @@ static int raid6_test(void)
>  		err += test(12, &tests);
>  	}
>  
> -	/* the 24 disk case is special for ioatdma as it is the boudary point
> +	/* the 24 disk case is special for ioatdma as it is the boundary point
>  	 * at which it needs to switch from 8-source ops to 16-source
>  	 * ops for continuation (assumes DMA_HAS_PQ_CONTINUE is not set)
>  	 */
> @@ -241,7 +241,7 @@ static void raid6_test_exit(void)
>  }
>  
>  /* when compiled-in wait for drivers to load first (assumes dma drivers
> - * are also compliled-in)
> + * are also compiled-in)
>   */
>  late_initcall(raid6_test);
>  module_exit(raid6_test_exit);
> diff --git a/crypto/cfb.c b/crypto/cfb.c
> index 0d664dfb47bc..5c36b7b65e2a 100644
> --- a/crypto/cfb.c
> +++ b/crypto/cfb.c
> @@ -1,4 +1,4 @@
> -//SPDX-License-Identifier: GPL-2.0
> +// SPDX-License-Identifier: GPL-2.0
>  /*
>   * CFB: Cipher FeedBack mode
>   *
> diff --git a/crypto/dh.c b/crypto/dh.c
> index 27e62a2a8027..be3138636726 100644
> --- a/crypto/dh.c
> +++ b/crypto/dh.c
> @@ -104,7 +104,7 @@ static int dh_set_secret(struct crypto_kpp *tfm, const void *buf,
>  /*
>   * SP800-56A public key verification:
>   *
> - * * If Q is provided as part of the domain paramenters, a full validation
> + * * If Q is provided as part of the domain parameters, a full validation
>   *   according to SP800-56A section 5.6.2.3.1 is performed.
>   *
>   * * If Q is not provided, a partial validation according to SP800-56A section
> diff --git a/crypto/sm2.c b/crypto/sm2.c
> index ae3f77a66070..f3e1592965c0 100644
> --- a/crypto/sm2.c
> +++ b/crypto/sm2.c
> @@ -1,4 +1,4 @@
> -/* SPDX-License-Identifier: GPL-2.0-or-later */
> +// SPDX-License-Identifier: GPL-2.0-or-later
>  /*
>   * SM2 asymmetric public-key algorithm
>   * as specified by OSCCA GM/T 0003.1-2012 -- 0003.5-2012 SM2 and
> -- 
> 2.26.3
> 

Acked-by: Jarkko Sakkinen <jarkko@xxxxxxxxxx>

BR, Jarkko



[Index of Archives]     [Kernel]     [Gnu Classpath]     [Gnu Crypto]     [DM Crypt]     [Netfilter]     [Bugtraq]

  Powered by Linux