This patch set consist of following updates: 1. Add misc workqueue for general purpose usage. 2. Move error source related CSRs from 4xxx to the wider GEN4 header file. 3. Add support for HW QAT Power Management (PM) feature. This feature is enabled at init time (1) by sending an admin message to the firmware, targeting the admin AE, that sets the idle time before the device changes state and (2) by unmasking the PM source of interrupt in ERRMSK2. The interrupt handler is extended to handle a PM interrupt which is triggered by HW when a PM transition occurs. In this case, the driver responds acknowledging the transaction using the HOST_MSG mailbox. Wojciech Ziemba (3): crypto: qat - add misc workqueue crypto: qat - move and rename GEN4 error register definitions crypto: qat - enable power management for QAT GEN4 .../crypto/qat/qat_4xxx/adf_4xxx_hw_data.c | 21 +-- .../crypto/qat/qat_4xxx/adf_4xxx_hw_data.h | 24 --- drivers/crypto/qat/qat_common/Makefile | 1 + .../crypto/qat/qat_common/adf_accel_devices.h | 2 + drivers/crypto/qat/qat_common/adf_admin.c | 37 +++++ .../crypto/qat/qat_common/adf_common_drv.h | 4 + drivers/crypto/qat/qat_common/adf_ctl_drv.c | 6 + .../crypto/qat/qat_common/adf_gen4_hw_data.h | 14 ++ drivers/crypto/qat/qat_common/adf_gen4_pm.c | 137 ++++++++++++++++++ drivers/crypto/qat/qat_common/adf_gen4_pm.h | 44 ++++++ drivers/crypto/qat/qat_common/adf_init.c | 6 + drivers/crypto/qat/qat_common/adf_isr.c | 42 ++++++ .../qat/qat_common/icp_qat_fw_init_admin.h | 1 + 13 files changed, 306 insertions(+), 33 deletions(-) create mode 100644 drivers/crypto/qat/qat_common/adf_gen4_pm.c create mode 100644 drivers/crypto/qat/qat_common/adf_gen4_pm.h -- 2.29.2 -------------------------------------------------------------- Intel Research and Development Ireland Limited Registered in Ireland Registered Office: Collinstown Industrial Park, Leixlip, County Kildare Registered Number: 308263 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies.