RE: [PATCH v3 2/2] arm64: dts: imx8m: define proper status for caam jr

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello Rouven,

> -----Original Message-----
> From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
> Sent: Thursday, January 6, 2022 12:27 PM
> To: ZHIZHIKIN Andrey <andrey.zhizhikin@xxxxxxxxxxxxxxxxxxxx>; linux-
> kernel@xxxxxxxxxxxxxxx
> Cc: peng.fan@xxxxxxx; ping.bai@xxxxxxx; alice.guo@xxxxxxx; agx@xxxxxxxxxxx;
> frieder.schrempf@xxxxxxxxxx; leonard.crestez@xxxxxxx; festevam@xxxxxxxxx;
> marex@xxxxxxx; herbert@xxxxxxxxxxxxxxxxxxx; horia.geanta@xxxxxxx;
> aford173@xxxxxxxxx; krzk@xxxxxxxxxx; linux-imx@xxxxxxx;
> devicetree@xxxxxxxxxxxxxxx; hongxing.zhu@xxxxxxx; s.hauer@xxxxxxxxxxxxxx;
> pankaj.gupta@xxxxxxx; robh+dt@xxxxxxxxxx; thunder.leizhen@xxxxxxxxxx;
> martink@xxxxxxxxx; daniel.baluta@xxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx;
> gregkh@xxxxxxxxxxxxxxxxxxx; shengjiu.wang@xxxxxxx; qiangqing.zhang@xxxxxxx;
> michael@xxxxxxxx; op-tee@xxxxxxxxxxxxxxxxxxxxxxxxx; linux-crypto@xxxxxxxxxxxxxxx;
> kernel@xxxxxxxxxxxxxx; jun.li@xxxxxxx; shawnguo@xxxxxxxxxx; davem@xxxxxxxxxxxxx;
> l.stach@xxxxxxxxxxxxxx
> Subject: Re: [PATCH v3 2/2] arm64: dts: imx8m: define proper status for caam jr
> 
> Hi Andrey,
> 
> On Wed, 2021-12-08 at 00:02 +0100, Andrey Zhizhikin wrote:
> > CAAM JR nodes are configured by BootROM and are used by various software
> > entities during the boot process before they reach the Kernel.
> >
> > Default BootROM configuration have JR0 and JR1 reserved for S-only
> > access, while JR2 is generally available for both S and NS access. HAB
> > feature of i.MX8M family does require that JR0 is reserved exclusively
> > in S-only world, while JR1 and JR2 are both released to NS-World. OP-TEE
> > can later reclaim the JR2 via dt_enable_secure_status() call, and modify
> > the DID to hold it in S-World only.
> >
> > The above setup has been discovered during review of CAAM patchset
> > presented to U-Boot integration [1], and does not correspond to the
> > status on jr nodes in FDT.
> >
> > This missing status settings leads to the following error message during
> > jr node probing:
> > [    1.509894] caam 30900000.crypto: job rings = 3, qi = 0
> > [    1.525201] caam_jr 30901000.jr: failed to flush job ring 0
> > [    1.525214] caam_jr: probe of 30901000.jr failed with error -5
> >
> > JR register readout after BootROM execution shows the following values:
> > JR0DID_MS = 0x8011
> > JR1DID_MS = 0x8011
> > JR2DID_MS = 0x0
> >
> > This shows that JR0 and JR1 have TZ_OWN bit set, which marks them to be
> > reserved for S-World, while JR2 remains accessible from NS-World.
> >
> > Provide the correct status for JR nodes in imx8m derivatives, which have
> > a following meaning:
> > - JR0: S-only
> > - JR1: visible in both
> > - JR2: NS-only
> >
> > Note, that JR2 is initially marked to be NS-only which does correspond
> > to DID readout when OP-TEE is not present. Once present, OP-TEE will
> > reclaim the JR2 and set both "status" and "secure-status" to claim JR2
> > for S-only access.
> 
> While I can understand that you want to fix your use case for when HAB
> is enabled, note that this is disabling JR0 in the none-HAB case as
> well.

This is not totally correct, as this patch does address the reservation of
JR0 by BootROM in both HAB and non-HAB configurations. My current setup does
not include HAB functionality enabled, and I still do observe boot errors
that are listed in commit message. This is due to the fact that the BootROM
does not release JR0 to NS-World regardless of whether HAB is enabled or not.
This has been discussed in the U-Boot thread I provided the link in the patch.

This patch does rather bring the correct HW module description as seeing
from Linux. 

> IMO this should be handled correctly by the bootloader and/or OP-
> TEE. The default upstream configuration for OP-TEE is to not use the
> CAAM at runtime as well, since linux runtime PM disablement of the CAAM
> will lock up OP-TEE when it tries to access the CAAM.

If by handling you mean releasing JR0 reservation - then yes, it should be
done by either SPL or TF-A as they do run in S World. In such a case, DTB
bindings need to be adapted further according to the new state. Until this
done - this patch does provide a correct state of HW to the Kernel.

> 
> Kind regards,
> Rouven Czerwinski
> 
> >
> > Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@xxxxxxxxxxxxxxxxxxxx>
> > Link: [1]: https://lore.kernel.org/u-boot/AM6PR06MB4691FC905FE5658BE4B15C11A6609@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx/
> > ---
> > Changes in V3:
> > - No change, new patch introduced
> >
> >  arch/arm64/boot/dts/freescale/imx8mm.dtsi | 4 ++++
> >  arch/arm64/boot/dts/freescale/imx8mn.dtsi | 4 ++++
> >  arch/arm64/boot/dts/freescale/imx8mp.dtsi | 4 ++++
> >  arch/arm64/boot/dts/freescale/imx8mq.dtsi | 4 ++++
> >  4 files changed, 16 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> > index 5b9c2cca9ac4..51465974c4ea 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> > @@ -914,18 +914,22 @@ sec_jr0: jr@1000 {
> >                                       compatible = "fsl,sec-v4.0-job-ring";
> >                                       reg = <0x1000 0x1000>;
> >                                       interrupts = <GIC_SPI 105
> IRQ_TYPE_LEVEL_HIGH>;
> > +                                     status = "disabled";
> > +                                     secure-status = "okay";
> >                               };
> >
> >                               sec_jr1: jr@2000 {
> >                                       compatible = "fsl,sec-v4.0-job-ring";
> >                                       reg = <0x2000 0x1000>;
> >                                       interrupts = <GIC_SPI 106
> IRQ_TYPE_LEVEL_HIGH>;
> > +                                     secure-status = "okay";
> >                               };
> >
> >                               sec_jr2: jr@3000 {
> >                                       compatible = "fsl,sec-v4.0-job-ring";
> >                                       reg = <0x3000 0x1000>;
> >                                       interrupts = <GIC_SPI 114
> IRQ_TYPE_LEVEL_HIGH>;
> > +                                     secure-status = "disabled";
> >                               };
> >                       };
> >
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
> b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
> > index ba23b416b5e6..e5edf14319b1 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
> > @@ -808,18 +808,22 @@ sec_jr0: jr@1000 {
> >                                        compatible = "fsl,sec-v4.0-job-ring";
> >                                        reg = <0x1000 0x1000>;
> >                                        interrupts = <GIC_SPI 105
> IRQ_TYPE_LEVEL_HIGH>;
> > +                                      status = "disabled";
> > +                                      secure-status = "okay";
> >                               };
> >
> >                               sec_jr1: jr@2000 {
> >                                        compatible = "fsl,sec-v4.0-job-ring";
> >                                        reg = <0x2000 0x1000>;
> >                                        interrupts = <GIC_SPI 106
> IRQ_TYPE_LEVEL_HIGH>;
> > +                                      secure-status = "okay";
> >                               };
> >
> >                               sec_jr2: jr@3000 {
> >                                        compatible = "fsl,sec-v4.0-job-ring";
> >                                        reg = <0x3000 0x1000>;
> >                                        interrupts = <GIC_SPI 114
> IRQ_TYPE_LEVEL_HIGH>;
> > +                                      secure-status = "disabled";
> >                               };
> >                       };
> >
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > index 977783784342..3c23bf5c3910 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > @@ -661,18 +661,22 @@ sec_jr0: jr@1000 {
> >                                       compatible = "fsl,sec-v4.0-job-ring";
> >                                       reg = <0x1000 0x1000>;
> >                                       interrupts = <GIC_SPI 105
> IRQ_TYPE_LEVEL_HIGH>;
> > +                                     status = "disabled";
> > +                                     secure-status = "okay";
> >                               };
> >
> >                               sec_jr1: jr@2000 {
> >                                       compatible = "fsl,sec-v4.0-job-ring";
> >                                       reg = <0x2000 0x1000>;
> >                                       interrupts = <GIC_SPI 106
> IRQ_TYPE_LEVEL_HIGH>;
> > +                                     secure-status = "okay";
> >                               };
> >
> >                               sec_jr2: jr@3000 {
> >                                       compatible = "fsl,sec-v4.0-job-ring";
> >                                       reg = <0x3000 0x1000>;
> >                                       interrupts = <GIC_SPI 114
> IRQ_TYPE_LEVEL_HIGH>;
> > +                                     secure-status = "disabled";
> >                               };
> >                       };
> >
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> > index 95d8b95d6120..16c4c9110ce7 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> > @@ -999,18 +999,22 @@ sec_jr0: jr@1000 {
> >                                       compatible = "fsl,sec-v4.0-job-ring";
> >                                       reg = <0x1000 0x1000>;
> >                                       interrupts = <GIC_SPI 105
> IRQ_TYPE_LEVEL_HIGH>;
> > +                                     status = "disabled";
> > +                                     secure-status = "okay";
> >                               };
> >
> >                               sec_jr1: jr@2000 {
> >                                       compatible = "fsl,sec-v4.0-job-ring";
> >                                       reg = <0x2000 0x1000>;
> >                                       interrupts = <GIC_SPI 106
> IRQ_TYPE_LEVEL_HIGH>;
> > +                                     secure-status = "okay";
> >                               };
> >
> >                               sec_jr2: jr@3000 {
> >                                       compatible = "fsl,sec-v4.0-job-ring";
> >                                       reg = <0x3000 0x1000>;
> >                                       interrupts = <GIC_SPI 114
> IRQ_TYPE_LEVEL_HIGH>;
> > +                                     secure-status = "disabled";
> >                               };
> >                       };
> >
> 
> --
> Pengutronix e.K.           | Rouven Czerwinski          |
> Steuerwalder Str. 21       | http://www.pengutronix.de/ |
> 31137 Hildesheim, Germany  | Phone: +49-5121-206917-0   |


-- andrey




[Index of Archives]     [Kernel]     [Gnu Classpath]     [Gnu Crypto]     [DM Crypt]     [Netfilter]     [Bugtraq]

  Powered by Linux