The two bindings are very similar and should be covered by the same
document, do that so we can get rid of an additional binding file.
Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
---
.../brcm,bcm3380-l2-intc.txt | 39 -------------------
.../brcm,bcm7120-l2-intc.yaml | 30 +++++++++++++-
2 files changed, 28 insertions(+), 41 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/brcm,bcm3380-l2-intc.txt
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm3380-l2-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm3380-l2-intc.txt
deleted file mode 100644
index 37aea40d5430..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm3380-l2-intc.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-Broadcom BCM3380-style Level 1 / Level 2 interrupt controller
-
-This interrupt controller shows up in various forms on many BCM338x/BCM63xx
-chipsets. It has the following properties:
-
-- outputs a single interrupt signal to its interrupt controller parent
-
-- contains one or more enable/status word pairs, which often appear at
- different offsets in different blocks
-
-- no atomic set/clear operations
-
-Required properties:
-
-- compatible: should be "brcm,bcm3380-l2-intc"
-- reg: specifies one or more enable/status pairs, in the following format:
- <enable_reg 0x4 status_reg 0x4>...
-- interrupt-controller: identifies the node as an interrupt controller
-- #interrupt-cells: specifies the number of cells needed to encode an interrupt
- source, should be 1.
-- interrupts: specifies the interrupt line in the interrupt-parent controller
- node, valid values depend on the type of parent interrupt controller
-
-Optional properties:
-
-- brcm,irq-can-wake: if present, this means the L2 controller can be used as a
- wakeup source for system suspend/resume.
-
-Example:
-
-irq0_intc: interrupt-controller@10000020 {
- compatible = "brcm,bcm3380-l2-intc";
- reg = <0x10000024 0x4 0x1000002c 0x4>,
- <0x10000020 0x4 0x10000028 0x4>;
- interrupt-controller;
- #interrupt-cells = <1>;
- interrupt-parent = <&cpu_intc>;
- interrupts = <2>;
-};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.yaml
index e0c6dce40d13..8be7fe29e6a9 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.yaml
@@ -4,7 +4,7 @@
$id: http://devicetree.org/schemas/interrupt-controller/brcm,bcm7120-l2-intc.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: Broadcom BCM7120-style Level 2 interrupt controller
+title: Broadcom BCM7120-style Level 2 and Broadcom BCM3380 Level 1 / Level 2
maintainers:
- Florian Fainelli <f.fainelli@xxxxxxxxx>
@@ -59,16 +59,31 @@ description: >
..
31 ........................ X
+ The BCM3380 Level 1 / Level 2 interrrupt controller shows up in various forms
+ on many BCM338x/BCM63xx chipsets. It has the following properties:
+
+ - outputs a single interrupt signal to its interrupt controller parent
+
+ - contains one or more enable/status word pairs, which often appear at
+ different offsets in different blocks
+
+ - no atomic set/clear operations
+
allOf:
- $ref: /schemas/interrupt-controller.yaml#
properties:
compatible:
- const: brcm,bcm7120-l2-intc
+ items:
+ - enum:
+ - brcm,bcm7120-l2-intc
+ - brcm,bcm3380-l2-intc
reg:
description: >
Specifies the base physical address and size of the registers
+ minItems: 1
+ maxItems: 4
interrupt-controller: true
@@ -121,3 +136,14 @@ examples:
brcm,int-map-mask = <0xeb8>, <0x140>;
brcm,int-fwd-mask = <0x7>;
};
+
+ - |
+ irq1_intc: interrupt-controller@10000020 {
+ compatible = "brcm,bcm3380-l2-intc";
+ reg = <0x10000024 0x4>, <0x1000002c 0x4>,
+ <0x10000020 0x4>, <0x10000028 0x4>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&cpu_intc>;
+ interrupts = <2>;
+ };
--
2.25.1
