Since we are using soc specific qce crypto IP compatibles
in the bindings now, use the same in the device tree files
which include the crypto nodes.
Cc: Thara Gopinath <thara.gopinath@xxxxxxxxxx>
Cc: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/ipq6018.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sdm845.dtsi | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index 933b56103a46..f477d026c949 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -204,7 +204,7 @@ cryptobam: dma-controller@704000 {
};
crypto: crypto@73a000 {
- compatible = "qcom,crypto-v5.1";
+ compatible = "qcom,ipq6018-qce";
reg = <0x0 0x0073a000 0x0 0x6000>;
clocks = <&gcc GCC_CRYPTO_AHB_CLK>,
<&gcc GCC_CRYPTO_AXI_CLK>,
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 526087586ba4..8e7cbadff25a 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -2329,7 +2329,7 @@ cryptobam: dma-controller@1dc4000 {
};
crypto: crypto@1dfa000 {
- compatible = "qcom,crypto-v5.4";
+ compatible = "qcom,sdm845-qce";
reg = <0 0x01dfa000 0 0x6000>;
clocks = <&gcc GCC_CE1_AHB_CLK>,
<&gcc GCC_CE1_AXI_CLK>,
--
2.31.1
