[PATCH v4 01/20] arm64/dts: qcom: Fix 'dma' & 'qcom,controlled-remotely' nodes in dts

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Preparatory patch for subsequent patch in this series which
converts the qcom_bam_dma device-tree binding into YAML format.

A few qcom device-tree files define dma-controller nodes
with non-standard 'node names' and also set
the bool property 'qcom,controlled-remotely' incorrectly, which
leads to following errors with 'make dtbs_check':

 $ arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dt.yaml:
     dma@1dc4000: $nodename:0: 'dma@1dc4000' does not match
     '^dma-controller(@.*)?$'

 $ arch/arm64/boot/dts/qcom/sm8250-mtp.dt.yaml:
     dma@1dc4000: qcom,controlled-remotely: 'oneOf' conditional
     failed, one must be fixed:
	[[1]] is not of type 'boolean'
	True was expected
	[[1]] is not of type 'null'

Fix the same.

Cc: Thara Gopinath <thara.gopinath@xxxxxxxxxx>
Cc: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/ipq6018.dtsi | 2 +-
 arch/arm64/boot/dts/qcom/ipq8074.dtsi | 4 ++--
 arch/arm64/boot/dts/qcom/msm8996.dtsi | 4 ++--
 arch/arm64/boot/dts/qcom/msm8998.dtsi | 2 +-
 arch/arm64/boot/dts/qcom/sdm845.dtsi  | 4 ++--
 5 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index d2fe58e0eb7a..7b6205c180df 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -200,7 +200,7 @@ cryptobam: dma-controller@704000 {
 			clock-names = "bam_clk";
 			#dma-cells = <1>;
 			qcom,ee = <1>;
-			qcom,controlled-remotely = <1>;
+			qcom,controlled-remotely;
 			qcom,config-pipe-trust-reg = <0>;
 		};
 
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index db333001df4d..99668e84953e 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -212,7 +212,7 @@ prng: rng@e3000 {
 			status = "disabled";
 		};
 
-		cryptobam: dma@704000 {
+		cryptobam: dma-controller@704000 {
 			compatible = "qcom,bam-v1.7.0";
 			reg = <0x00704000 0x20000>;
 			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
@@ -220,7 +220,7 @@ cryptobam: dma@704000 {
 			clock-names = "bam_clk";
 			#dma-cells = <1>;
 			qcom,ee = <1>;
-			qcom,controlled-remotely = <1>;
+			qcom,controlled-remotely;
 			status = "disabled";
 		};
 
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 52df22ab3f6a..390468e1b62e 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -2686,7 +2686,7 @@ sdhc2: sdhci@74a4900 {
 			status = "disabled";
 		 };
 
-		blsp1_dma: dma@7544000 {
+		blsp1_dma: dma-controller@7544000 {
 			compatible = "qcom,bam-v1.7.0";
 			reg = <0x07544000 0x2b000>;
 			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
@@ -2743,7 +2743,7 @@ blsp1_i2c3: i2c@7577000 {
 			status = "disabled";
 		};
 
-		blsp2_dma: dma@7584000 {
+		blsp2_dma: dma-controller@7584000 {
 			compatible = "qcom,bam-v1.7.0";
 			reg = <0x07584000 0x2b000>;
 			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index 34039b5c8017..a46838f1e310 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -2187,7 +2187,7 @@ blsp1_i2c6: i2c@c17a000 {
 			#size-cells = <0>;
 		};
 
-		blsp2_dma: dma@c184000 {
+		blsp2_dma: dma-controller@c184000 {
 			compatible = "qcom,bam-v1.7.0";
 			reg = <0x0c184000 0x25000>;
 			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index b3b911926184..72ec48c4e03c 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -2312,7 +2312,7 @@ ufs_mem_phy_lanes: lanes@1d87400 {
 			};
 		};
 
-		cryptobam: dma@1dc4000 {
+		cryptobam: dma-controller@1dc4000 {
 			compatible = "qcom,bam-v1.7.0";
 			reg = <0 0x01dc4000 0 0x24000>;
 			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
@@ -2320,7 +2320,7 @@ cryptobam: dma@1dc4000 {
 			clock-names = "bam_clk";
 			#dma-cells = <1>;
 			qcom,ee = <0>;
-			qcom,controlled-remotely = <1>;
+			qcom,controlled-remotely;
 			iommus = <&apps_smmu 0x704 0x1>,
 				 <&apps_smmu 0x706 0x1>,
 				 <&apps_smmu 0x714 0x1>,
-- 
2.31.1




[Index of Archives]     [Kernel]     [Gnu Classpath]     [Gnu Crypto]     [DM Crypt]     [Netfilter]     [Bugtraq]

  Powered by Linux