Re: [v4,9/9] arm64: dts: mediatek: add mt7986b support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2021-10-04 10:16, Sam Shih wrote:
Add basic chip support for Mediatek mt7986b, include
uart nodes with correct clocks, rng node with correct clock,
and watchdog node and mt7986b pinctrl node.

Add cpu node, timer node, gic node, psci and reserved-memory node
for ARM Trusted Firmware,

Add clock controller nodes, include 40M clock source, topckgen, infracfg,
apmixedsys and ethernet subsystem.

Signed-off-by: Sam Shih <sam.shih@xxxxxxxxxxxx>
---
v4: added missing gic register bases, and fixed range of GICR
v3: used the stdout-path instead of console=ttyS0
v2: modified clock and uart node due to clock driver updated
---
 arch/arm64/boot/dts/mediatek/Makefile        |   1 +
 arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts |  26 +++
 arch/arm64/boot/dts/mediatek/mt7986b.dtsi    | 230 +++++++++++++++++++
 3 files changed, 257 insertions(+)
 create mode 100644 arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
 create mode 100644 arch/arm64/boot/dts/mediatek/mt7986b.dtsi

diff --git a/arch/arm64/boot/dts/mediatek/Makefile
b/arch/arm64/boot/dts/mediatek/Makefile
index e6c3a73b9e4a..d555e43d1ccc 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -8,6 +8,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-rfb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986b-rfb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8167-pumpkin.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
new file mode 100644
index 000000000000..95a202505bb2
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Author: Sam.Shih <sam.shih@xxxxxxxxxxxx>
+ */
+
+/dts-v1/;
+#include "mt7986b.dtsi"
+
+/ {
+	model = "MediaTek MT7986b RFB";
+	compatible = "mediatek,mt7986b-rfb";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+		bootargs = "earlycon=uart8250,mmio32,0x11002000 swiotlb=512";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7986b.dtsi
b/arch/arm64/boot/dts/mediatek/mt7986b.dtsi
new file mode 100644
index 000000000000..06c3381a5170
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7986b.dtsi
@@ -0,0 +1,230 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Author: Sam.Shih <sam.shih@xxxxxxxxxxxx>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/mt7986-clk.h>
+
+/ {
+	compatible = "mediatek,mt7986b";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	clk40m: oscillator@0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <40000000>;
+		clock-output-names = "clkxtal";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x1>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x2>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			enable-method = "psci";
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	psci {
+		compatible  = "arm,psci-0.2";
+		method      = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		/* 192 KiB reserved for ARM Trusted Firmware (BL31) */
+		secmon_reserved: secmon@43000000 {
+			reg = <0 0x43000000 0 0x30000>;
+			no-map;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		clock-frequency = <13000000>;

As previously mentioned, please fix your firmware and drop this.

+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		ranges;
+
+		gic: interrupt-controller@c000000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			reg = <0 0x0c000000 0 0x40000>,  /* GICD */

This is not a valid value for GICD.

Thanks,

        M.



[Index of Archives]     [Kernel]     [Gnu Classpath]     [Gnu Crypto]     [DM Crypt]     [Netfilter]     [Bugtraq]

  Powered by Linux