On Mon, 27 Sep 2021 10:34:19 +0800, Sam Shih wrote: > This updates bindings for MT7986 pinctrl driver. The > difference of pinctrl between mt7986a and mt7986b is that pin-41 to pin-65 > do not exist on mt7986b > > Signed-off-by: Sam Shih <sam.shih@xxxxxxxxxxxx> > > --- > v5 : fixed yamllint warnings/errors > v4 : used yaml format instead of txt format document > v3 : make mt7986 pinctrl bindings as a separate file > v2 : deleted the redundant description of mt7986a/mt7986b > --- > .../pinctrl/mediatek,mt7986-pinctrl.yaml | 353 ++++++++++++++++++ > 1 file changed, 353 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.example.dts:25.13-32.43: Warning (reg_format): /example-0/soc/pinctrl@1001f000:reg: property has invalid length (128 bytes) (#address-cells == 2, #size-cells == 1) Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.example.dt.yaml: Warning (pci_device_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.example.dt.yaml: Warning (pci_device_bus_num): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.example.dt.yaml: Warning (simple_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.example.dt.yaml: Warning (i2c_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.example.dt.yaml: Warning (spi_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.example.dts:23.33-58.13: Warning (avoid_default_addr_size): /example-0/soc/pinctrl@1001f000: Relying on default #address-cells value Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.example.dts:23.33-58.13: Warning (avoid_default_addr_size): /example-0/soc/pinctrl@1001f000: Relying on default #size-cells value Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.example.dt.yaml: Warning (unique_unit_address): Failed prerequisite 'avoid_default_addr_size' /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.example.dt.yaml: pinctrl@1001f000: 'gpio-ranges' does not match any of the regexes: '-[0-9]+$', 'pinctrl-[0-9]+' From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/patch/1533169 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
