The CTR counter is 32bit rollover default on the BD.
But the NIST standard is 128bit rollover. it cause the
testing failed, so need to fix the BD configuration.
Signed-off-by: Kai Ye <yekai13@xxxxxxxxxx>
---
drivers/crypto/hisilicon/sec2/sec_crypto.c | 6 ++++++
drivers/crypto/hisilicon/sec2/sec_crypto.h | 6 ++++--
2 files changed, 10 insertions(+), 2 deletions(-)
diff --git a/drivers/crypto/hisilicon/sec2/sec_crypto.c b/drivers/crypto/hisilicon/sec2/sec_crypto.c
index 387fb3c..5be1034 100644
--- a/drivers/crypto/hisilicon/sec2/sec_crypto.c
+++ b/drivers/crypto/hisilicon/sec2/sec_crypto.c
@@ -42,6 +42,8 @@
#define SEC_DE_OFFSET_V3 9
#define SEC_SCENE_OFFSET_V3 5
#define SEC_CKEY_OFFSET_V3 13
+#define SEC_CTR_CNT_OFFSET 25
+#define SEC_CTR_CNT_ROLLOVER 2
#define SEC_SRC_SGL_OFFSET_V3 11
#define SEC_DST_SGL_OFFSET_V3 14
#define SEC_CALG_OFFSET_V3 4
@@ -1301,6 +1303,10 @@ static int sec_skcipher_bd_fill_v3(struct sec_ctx *ctx, struct sec_req *req)
cipher = SEC_CIPHER_DEC;
sec_sqe3->c_icv_key |= cpu_to_le16(cipher);
+ /* Set the CTR counter mode is 128bit rollover */
+ sec_sqe3->auth_mac_key = cpu_to_le32((u32)SEC_CTR_CNT_ROLLOVER <<
+ SEC_CTR_CNT_OFFSET);
+
if (req->use_pbuf) {
bd_param |= SEC_PBUF << SEC_SRC_SGL_OFFSET_V3;
bd_param |= SEC_PBUF << SEC_DST_SGL_OFFSET_V3;
diff --git a/drivers/crypto/hisilicon/sec2/sec_crypto.h b/drivers/crypto/hisilicon/sec2/sec_crypto.h
index 9f71c35..5e039b5 100644
--- a/drivers/crypto/hisilicon/sec2/sec_crypto.h
+++ b/drivers/crypto/hisilicon/sec2/sec_crypto.h
@@ -354,8 +354,10 @@ struct sec_sqe3 {
* akey_len: 9~14 bits
* a_alg: 15~20 bits
* key_sel: 21~24 bits
- * updata_key: 25 bits
- * reserved: 26~31 bits
+ * ctr_count_mode/sm4_xts: 25~26 bits
+ * sva_prefetch: 27 bits
+ * key_wrap_num: 28~30 bits
+ * update_key: 31 bits
*/
__le32 auth_mac_key;
__le32 salt;
--
2.7.4
