From: Subbaraya Sundeep <sbhatta@xxxxxxxxxxx>
Firmware allocates memory regions for PFs and VFs in DRAM.
The PFs memory region is used for AF-PF and PF-VF mailbox.
This mbox facilitate communication between AF-PF and PF-VF.
On CN10K platform:
The DRAM region allocated to PF is enumerated as PF BAR4 memory.
PF BAR4 contains AF-PF mbox region followed by its VFs mbox region.
AF-PF mbox region base address is configured at RVU_AF_PFX_BAR4_ADDR
PF-VF mailbox base address is configured at
RVU_PF(x)_VF_MBOX_ADDR = RVU_AF_PF()_BAR4_ADDR+64KB. PF access its
mbox region via BAR4, whereas VF accesses PF-VF DRAM mailboxes via
BAR2 indirect access.
On CN9XX platform:
Mailbox region in DRAM is divided into two parts AF-PF mbox region and
PF-VF mbox region i.e all PFs mbox region is contiguous similarly all
VFs.
The base address of the AF-PF mbox region is configured at
RVU_AF_PF_BAR4_ADDR.
AF-PF1 mbox address can be calculated as RVU_AF_PF_BAR4_ADDR * mbox
size.
The base address of PF-VF mbox region for each PF is configure at
RVU_AF_PF(0..15)_VF_BAR4_ADDR.PF access its mbox region via BAR4 and its
VF mbox regions from RVU_PF_VF_BAR4_ADDR register, whereas VF access its
mbox region via BAR4.
This patch changes mbox initialization to support both CN9XX and CN10K
platform.
The patch also adds new hw_cap flag to setting hw features like TSO etc
and removes platform specific name from the PF/VF driver name to make it
appropriate for all supported platforms
This patch also removes platform specific name from the PF/VF driver name
to make it appropriate for all supported platforms
Signed-off-by: Subbaraya Sundeep <sbhatta@xxxxxxxxxxx>
Signed-off-by: Geetha sowjanya <gakula@xxxxxxxxxxx>
Signed-off-by: Sunil Goutham <sgoutham@xxxxxxxxxxx>
---
.../ethernet/marvell/octeontx2/nic/Makefile | 8 ++--
.../marvell/octeontx2/nic/otx2_common.h | 29 +++++++++++++--
.../ethernet/marvell/octeontx2/nic/otx2_pf.c | 18 ++++++---
.../ethernet/marvell/octeontx2/nic/otx2_reg.h | 3 ++
.../marvell/octeontx2/nic/otx2_txrx.c | 5 ++-
.../ethernet/marvell/octeontx2/nic/otx2_vf.c | 37 ++++++++++++-------
6 files changed, 73 insertions(+), 27 deletions(-)
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/Makefile b/drivers/net/ethernet/marvell/octeontx2/nic/Makefile
index 4193ae3bde6b..29c82b94b2dc 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/Makefile
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/Makefile
@@ -3,11 +3,11 @@
# Makefile for Marvell's OcteonTX2 ethernet device drivers
#
-obj-$(CONFIG_OCTEONTX2_PF) += octeontx2_nicpf.o
-obj-$(CONFIG_OCTEONTX2_VF) += octeontx2_nicvf.o
+obj-$(CONFIG_OCTEONTX2_PF) += rvu_nicpf.o
+obj-$(CONFIG_OCTEONTX2_VF) += rvu_nicvf.o
-octeontx2_nicpf-y := otx2_pf.o otx2_common.o otx2_txrx.o otx2_ethtool.o \
+rvu_nicpf-y := otx2_pf.o otx2_common.o otx2_txrx.o otx2_ethtool.o \
otx2_ptp.o otx2_flows.o
-octeontx2_nicvf-y := otx2_vf.o
+rvu_nicvf-y := otx2_vf.o
ccflags-y += -I$(srctree)/drivers/net/ethernet/marvell/octeontx2/af
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h
index f8e2b6b1bf5a..3542f2d6c698 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h
@@ -190,7 +190,6 @@ struct otx2_hw {
u8 lso_tsov6_idx;
u8 lso_udpv4_idx;
u8 lso_udpv6_idx;
- u8 hw_tso;
/* MSI-X */
u8 cint_cnt; /* CQ interrupt count */
@@ -208,6 +207,9 @@ struct otx2_hw {
u64 cgx_fec_uncorr_blks;
u8 cgx_links; /* No. of CGX links present in HW */
u8 lbk_links; /* No. of LBK links present in HW */
+#define HW_TSO BIT_ULL(0)
+#define CN10K_MBOX BIT_ULL(1)
+ unsigned long cap_flag;
};
struct otx2_vf_config {
@@ -341,6 +343,25 @@ static inline bool is_96xx_B0(struct pci_dev *pdev)
(pdev->subsystem_device == PCI_SUBSYS_DEVID_96XX_RVU_PFVF);
}
+/* REVID for PCIe devices.
+ * Bits 0..1: minor pass, bit 3..2: major pass
+ * bits 7..4: midr id
+ */
+#define PCI_REVISION_ID_96XX 0x00
+#define PCI_REVISION_ID_95XX 0x10
+#define PCI_REVISION_ID_LOKI 0x20
+#define PCI_REVISION_ID_98XX 0x30
+#define PCI_REVISION_ID_95XXMM 0x40
+
+static inline bool is_dev_otx2(struct pci_dev *pdev)
+{
+ u8 midr = pdev->revision & 0xF0;
+
+ return (midr == PCI_REVISION_ID_96XX || midr == PCI_REVISION_ID_95XX ||
+ midr == PCI_REVISION_ID_LOKI || midr == PCI_REVISION_ID_98XX ||
+ midr == PCI_REVISION_ID_95XXMM);
+}
+
static inline void otx2_setup_dev_hw_settings(struct otx2_nic *pfvf)
{
struct otx2_hw *hw = &pfvf->hw;
@@ -349,10 +370,10 @@ static inline void otx2_setup_dev_hw_settings(struct otx2_nic *pfvf)
pfvf->hw.cq_ecount_wait = CQ_CQE_THRESH_DEFAULT;
pfvf->hw.cq_qcount_wait = CQ_QCOUNT_DEFAULT;
- hw->hw_tso = true;
+ __set_bit(HW_TSO, &hw->cap_flag);
if (is_96xx_A0(pfvf->pdev)) {
- hw->hw_tso = false;
+ __clear_bit(HW_TSO, &hw->cap_flag);
/* Time based irq coalescing is not supported */
pfvf->hw.cq_qcount_wait = 0x0;
@@ -363,6 +384,8 @@ static inline void otx2_setup_dev_hw_settings(struct otx2_nic *pfvf)
pfvf->hw.rq_skid = 600;
pfvf->qset.rqe_cnt = Q_COUNT(Q_SIZE_1K);
}
+ if (!is_dev_otx2(pfvf->pdev))
+ __set_bit(CN10K_MBOX, &hw->cap_flag);
}
/* Register read/write APIs */
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
index d024dac705db..e46d0d1c5782 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
@@ -24,8 +24,8 @@
#include "otx2_ptp.h"
#include <rvu_trace.h>
-#define DRV_NAME "octeontx2-nicpf"
-#define DRV_STRING "Marvell OcteonTX2 NIC Physical Function Driver"
+#define DRV_NAME "rvu_nicpf"
+#define DRV_STRING "Marvell RVU NIC Physical Function Driver"
/* Supported devices */
static const struct pci_device_id otx2_pf_id_table[] = {
@@ -585,9 +585,17 @@ static int otx2_pfvf_mbox_init(struct otx2_nic *pf, int numvfs)
if (!pf->mbox_pfvf_wq)
return -ENOMEM;
- base = readq((void __iomem *)((u64)pf->reg_base + RVU_PF_VF_BAR4_ADDR));
- hwbase = ioremap_wc(base, MBOX_SIZE * pf->total_vfs);
+ /* On CN10K platform, PF <-> VF mailbox region follows after
+ * PF <-> AF mailbox region.
+ */
+ if (test_bit(CN10K_MBOX, &pf->hw.cap_flag))
+ base = pci_resource_start(pf->pdev, PCI_MBOX_BAR_NUM) +
+ MBOX_SIZE;
+ else
+ base = readq((void __iomem *)((u64)pf->reg_base +
+ RVU_PF_VF_BAR4_ADDR));
+ hwbase = ioremap_wc(base, MBOX_SIZE * pf->total_vfs);
if (!hwbase) {
err = -ENOMEM;
goto free_wq;
@@ -1042,7 +1050,7 @@ static int otx2_pfaf_mbox_init(struct otx2_nic *pf)
* device memory to allow unaligned accesses.
*/
hwbase = ioremap_wc(pci_resource_start(pf->pdev, PCI_MBOX_BAR_NUM),
- pci_resource_len(pf->pdev, PCI_MBOX_BAR_NUM));
+ MBOX_SIZE);
if (!hwbase) {
dev_err(pf->dev, "Unable to map PFAF mailbox region\n");
err = -ENOMEM;
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_reg.h b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_reg.h
index 867f646e0802..1e052d76a580 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_reg.h
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_reg.h
@@ -44,6 +44,8 @@
#define RVU_PF_MSIX_VECX_ADDR(a) (0x000 | (a) << 4)
#define RVU_PF_MSIX_VECX_CTL(a) (0x008 | (a) << 4)
#define RVU_PF_MSIX_PBAX(a) (0xF0000 | (a) << 3)
+#define RVU_PF_VF_MBOX_ADDR (0xC40)
+#define RVU_PF_LMTLINE_ADDR (0xC48)
/* RVU VF registers */
#define RVU_VF_VFPF_MBOX0 (0x00000)
@@ -57,6 +59,7 @@
#define RVU_VF_MSIX_VECX_ADDR(a) (0x000 | (a) << 4)
#define RVU_VF_MSIX_VECX_CTL(a) (0x008 | (a) << 4)
#define RVU_VF_MSIX_PBAX(a) (0xF0000 | (a) << 3)
+#define RVU_VF_MBOX_REGION (0xC0000)
#define RVU_FUNC_BLKADDR_SHIFT 20
#define RVU_FUNC_BLKADDR_MASK 0x1FULL
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.c
index cc0dac325f77..68f80e75c8c7 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.c
@@ -805,8 +805,6 @@ static bool is_hw_tso_supported(struct otx2_nic *pfvf,
{
int payload_len, last_seg_size;
- if (!pfvf->hw.hw_tso)
- return false;
/* HW has an issue due to which when the payload of the last LSO
* segment is shorter than 16 bytes, some header fields may not
@@ -820,6 +818,9 @@ static bool is_hw_tso_supported(struct otx2_nic *pfvf,
if (last_seg_size && last_seg_size < 16)
return false;
+ if (!test_bit(HW_TSO, &pfvf->hw.cap_flag))
+ return false;
+
return true;
}
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c
index d3e4cfd244e2..e7d8fef4f53d 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c
@@ -8,8 +8,8 @@
#include "otx2_common.h"
#include "otx2_reg.h"
-#define DRV_NAME "octeontx2-nicvf"
-#define DRV_STRING "Marvell OcteonTX2 NIC Virtual Function Driver"
+#define DRV_NAME "rvu_nicvf"
+#define DRV_STRING "Marvell RVU NIC Virtual Function Driver"
static const struct pci_device_id otx2_vf_id_table[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_CAVIUM, PCI_DEVID_OCTEONTX2_RVU_AFVF) },
@@ -277,7 +277,7 @@ static void otx2vf_vfaf_mbox_destroy(struct otx2_nic *vf)
vf->mbox_wq = NULL;
}
- if (mbox->mbox.hwbase)
+ if (mbox->mbox.hwbase && !test_bit(CN10K_MBOX, &vf->hw.cap_flag))
iounmap((void __iomem *)mbox->mbox.hwbase);
otx2_mbox_destroy(&mbox->mbox);
@@ -297,16 +297,25 @@ static int otx2vf_vfaf_mbox_init(struct otx2_nic *vf)
if (!vf->mbox_wq)
return -ENOMEM;
- /* Mailbox is a reserved memory (in RAM) region shared between
- * admin function (i.e PF0) and this VF, shouldn't be mapped as
- * device memory to allow unaligned accesses.
- */
- hwbase = ioremap_wc(pci_resource_start(vf->pdev, PCI_MBOX_BAR_NUM),
- pci_resource_len(vf->pdev, PCI_MBOX_BAR_NUM));
- if (!hwbase) {
- dev_err(vf->dev, "Unable to map VFAF mailbox region\n");
- err = -ENOMEM;
- goto exit;
+ if (test_bit(CN10K_MBOX, &vf->hw.cap_flag)) {
+ /* For cn10k platform, VF mailbox region is in its BAR2
+ * register space
+ */
+ hwbase = vf->reg_base + RVU_VF_MBOX_REGION;
+ } else {
+ /* Mailbox is a reserved memory (in RAM) region shared between
+ * admin function (i.e PF0) and this VF, shouldn't be mapped as
+ * device memory to allow unaligned accesses.
+ */
+ hwbase = ioremap_wc(pci_resource_start(vf->pdev,
+ PCI_MBOX_BAR_NUM),
+ pci_resource_len(vf->pdev,
+ PCI_MBOX_BAR_NUM));
+ if (!hwbase) {
+ dev_err(vf->dev, "Unable to map VFAF mailbox region\n");
+ err = -ENOMEM;
+ goto exit;
+ }
}
err = otx2_mbox_init(&mbox->mbox, hwbase, vf->pdev, vf->reg_base,
@@ -329,6 +338,8 @@ static int otx2vf_vfaf_mbox_init(struct otx2_nic *vf)
return 0;
exit:
+ if (hwbase && !test_bit(CN10K_MBOX, &vf->hw.cap_flag))
+ iounmap(hwbase);
destroy_workqueue(vf->mbox_wq);
return err;
}
--
2.17.1
