From: Eric Biggers <ebiggers@xxxxxxxxxx>
Add an ARM scalar optimized implementation of BLAKE2s.
NEON isn't very useful for BLAKE2s because the BLAKE2s block size is too
small for NEON to help. Each NEON instruction would depend on the
previous one, resulting in poor performance.
With scalar instructions, on the other hand, we can take advantage of
ARM's "free" rotations (like I did in chacha-scalar-core.S) to get an
implementation get runs much faster than the C implementation.
Performance results on Cortex-A7 in cycles per byte using the shash API:
4096-byte messages:
blake2s-256-arm: 18.8
blake2s-256-generic: 26.1
500-byte messages:
blake2s-256-arm: 20.7
blake2s-256-generic: 28.3
100-byte messages:
blake2s-256-arm: 32.3
blake2s-256-generic: 42.4
32-byte messages:
blake2s-256-arm: 55.8
blake2s-256-generic: 72.1
Except on very short messages, this is still slower than the NEON
implementation of BLAKE2b which I've written; that is 14.0, 16.7, 26.2,
and 80.6 cpb on 4096, 500, 100, and 32-byte messages, respectively.
However, optimized BLAKE2s is useful for cases where BLAKE2s is used
instead of BLAKE2b, such as WireGuard.
This new implementation is added in the form of a new module
blake2s-arm.ko, which is analogous to blake2s-x86_64.ko in that it
provides blake2s_compress_arch() for use by the library API as well as
optionally register the algorithms with the shash API.
Signed-off-by: Eric Biggers <ebiggers@xxxxxxxxxx>
---
arch/arm/crypto/Kconfig | 10 ++
arch/arm/crypto/Makefile | 2 +
arch/arm/crypto/blake2s-core.S | 272 +++++++++++++++++++++++++++++++++
arch/arm/crypto/blake2s-glue.c | 78 ++++++++++
4 files changed, 362 insertions(+)
create mode 100644 arch/arm/crypto/blake2s-core.S
create mode 100644 arch/arm/crypto/blake2s-glue.c
diff --git a/arch/arm/crypto/Kconfig b/arch/arm/crypto/Kconfig
index f6a14c186b4ec..e87e3bc9b6d5e 100644
--- a/arch/arm/crypto/Kconfig
+++ b/arch/arm/crypto/Kconfig
@@ -72,6 +72,16 @@ config CRYPTO_BLAKE2B_NEON
Crypto Extensions, typically this BLAKE2b implementation is
much faster than SHA-2 and slightly faster than SHA-1.
+config CRYPTO_BLAKE2S_ARM
+ tristate "BLAKE2s digest algorithm (ARM)"
+ select CRYPTO_ARCH_HAVE_LIB_BLAKE2S
+ select CRYPTO_BLAKE2S_HELPERS if CRYPTO_HASH
+ help
+ BLAKE2s digest algorithm optimized with ARM scalar instructions. This
+ is faster than the generic implementations of BLAKE2s and BLAKE2b, but
+ slower than the NEON implementation of BLAKE2b. (There is no NEON
+ implementation of BLAKE2s, since NEON doesn't really help with it.)
+
config CRYPTO_AES_ARM
tristate "Scalar AES cipher for ARM"
select CRYPTO_ALGAPI
diff --git a/arch/arm/crypto/Makefile b/arch/arm/crypto/Makefile
index ab835ceeb4f2e..fcd80f660b762 100644
--- a/arch/arm/crypto/Makefile
+++ b/arch/arm/crypto/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_CRYPTO_SHA1_ARM_NEON) += sha1-arm-neon.o
obj-$(CONFIG_CRYPTO_SHA256_ARM) += sha256-arm.o
obj-$(CONFIG_CRYPTO_SHA512_ARM) += sha512-arm.o
obj-$(CONFIG_CRYPTO_BLAKE2B_NEON) += blake2b-neon.o
+obj-$(CONFIG_CRYPTO_BLAKE2S_ARM) += blake2s-arm.o
obj-$(CONFIG_CRYPTO_CHACHA20_NEON) += chacha-neon.o
obj-$(CONFIG_CRYPTO_POLY1305_ARM) += poly1305-arm.o
obj-$(CONFIG_CRYPTO_NHPOLY1305_NEON) += nhpoly1305-neon.o
@@ -31,6 +32,7 @@ sha256-arm-y := sha256-core.o sha256_glue.o $(sha256-arm-neon-y)
sha512-arm-neon-$(CONFIG_KERNEL_MODE_NEON) := sha512-neon-glue.o
sha512-arm-y := sha512-core.o sha512-glue.o $(sha512-arm-neon-y)
blake2b-neon-y := blake2b-neon-core.o blake2b-neon-glue.o
+blake2s-arm-y := blake2s-core.o blake2s-glue.o
sha1-arm-ce-y := sha1-ce-core.o sha1-ce-glue.o
sha2-arm-ce-y := sha2-ce-core.o sha2-ce-glue.o
aes-arm-ce-y := aes-ce-core.o aes-ce-glue.o
diff --git a/arch/arm/crypto/blake2s-core.S b/arch/arm/crypto/blake2s-core.S
new file mode 100644
index 0000000000000..88aa1875911d8
--- /dev/null
+++ b/arch/arm/crypto/blake2s-core.S
@@ -0,0 +1,272 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * BLAKE2s digest algorithm, ARM scalar implementation
+ *
+ * Copyright 2020 Google LLC
+ *
+ * Author: Eric Biggers <ebiggers@xxxxxxxxxx>
+ */
+
+#include <linux/linkage.h>
+
+ // Registers used to hold message words temporarily. There aren't
+ // enough ARM registers to hold the whole message block, so we have to
+ // load the words on-demand.
+ M_0 .req r12
+ M_1 .req r14
+
+// The BLAKE2s initialization vector
+.Lblake2s_IV:
+ .word 0x6A09E667, 0xBB67AE85, 0x3C6EF372, 0xA54FF53A
+ .word 0x510E527F, 0x9B05688C, 0x1F83D9AB, 0x5BE0CD19
+
+.macro __ldrd a, b, src, offset
+#if __LINUX_ARM_ARCH__ >= 6
+ ldrd \a, \b, [\src, #\offset]
+#else
+ ldr \a, [\src, #\offset]
+ ldr \b, [\src, #\offset + 4]
+#endif
+.endm
+
+.macro __strd a, b, dst, offset
+#if __LINUX_ARM_ARCH__ >= 6
+ strd \a, \b, [\dst, #\offset]
+#else
+ str \a, [\dst, #\offset]
+ str \b, [\dst, #\offset + 4]
+#endif
+.endm
+
+.macro _blake2s_quarterround a0, b0, c0, d0, a1, b1, c1, d1, s0, s1, s2, s3
+
+ ldr M_0, [sp, #32 + 4 * \s0]
+ ldr M_1, [sp, #32 + 4 * \s2]
+
+ // a += b + m[blake2s_sigma[r][2 * i + 0]];
+ add \a0, \a0, \b0, ror #brot
+ add \a1, \a1, \b1, ror #brot
+ add \a0, \a0, M_0
+ add \a1, \a1, M_1
+
+ // d = ror32(d ^ a, 16);
+ eor \d0, \a0, \d0, ror #drot
+ eor \d1, \a1, \d1, ror #drot
+
+ // c += d;
+ add \c0, \c0, \d0, ror #16
+ add \c1, \c1, \d1, ror #16
+
+ // b = ror32(b ^ c, 12);
+ eor \b0, \c0, \b0, ror #brot
+ eor \b1, \c1, \b1, ror #brot
+
+ ldr M_0, [sp, #32 + 4 * \s1]
+ ldr M_1, [sp, #32 + 4 * \s3]
+
+ // a += b + m[blake2s_sigma[r][2 * i + 1]];
+ add \a0, \a0, \b0, ror #12
+ add \a1, \a1, \b1, ror #12
+ add \a0, \a0, M_0
+ add \a1, \a1, M_1
+
+ // d = ror32(d ^ a, 8);
+ eor \d0, \a0, \d0, ror#16
+ eor \d1, \a1, \d1, ror#16
+
+ // c += d;
+ add \c0, \c0, \d0, ror#8
+ add \c1, \c1, \d1, ror#8
+
+ // b = ror32(b ^ c, 7);
+ eor \b0, \c0, \b0, ror#12
+ eor \b1, \c1, \b1, ror#12
+.endm
+
+// Execute one round of BLAKE2s by updating the state matrix v[0..15]. v[0..9]
+// are in r0..r9. The stack pointer points to 8 bytes of scratch space for
+// spilling v[8..9], then to v[9..15], then to the message block. r10-r12 and
+// r14 are free to use. The macro arguments s0-s15 give the order in which the
+// message words are used in this round.
+//
+// All rotates are performed using the implicit rotate operand accepted by the
+// 'add' and 'eor' instructions. This is faster than using explicit rotate
+// instructions. To make this work, we allow the values in the second and last
+// rows of the BLAKE2s state matrix (rows 'b' and 'd') to temporarily have the
+// wrong rotation amount. The rotation amount is then fixed up just in time
+// when the values are used. 'brot' is the number of bits the values in row 'b'
+// need to be rotated right to arrive at the correct values, and 'drot'
+// similarly for row 'd'. (brot, drot) start out as (0, 0) but we make it such
+// that they end up as (7, 8) after every round.
+.macro _blake2s_round s0, s1, s2, s3, s4, s5, s6, s7, \
+ s8, s9, s10, s11, s12, s13, s14, s15
+
+ // Mix first two columns:
+ // (v[0], v[4], v[8], v[12]) and (v[1], v[5], v[9], v[13]).
+ __ldrd r10, r11, sp, 16 // load v[12] and v[13]
+ _blake2s_quarterround r0, r4, r8, r10, r1, r5, r9, r11, \
+ \s0, \s1, \s2, \s3
+ __strd r8, r9, sp, 0
+ __strd r10, r11, sp, 16
+
+ // Mix second two columns:
+ // (v[2], v[6], v[10], v[14]) and (v[3], v[7], v[11], v[15]).
+ __ldrd r8, r9, sp, 8 // load v[10] and v[11]
+ __ldrd r10, r11, sp, 24 // load v[14] and v[15]
+ _blake2s_quarterround r2, r6, r8, r10, r3, r7, r9, r11, \
+ \s4, \s5, \s6, \s7
+ str r10, [sp, #24] // store v[14]
+ // v[10], v[11], and v[15] are used below, so no need to store them yet.
+
+ .set brot, 7
+ .set drot, 8
+
+ // Mix first two diagonals:
+ // (v[0], v[5], v[10], v[15]) and (v[1], v[6], v[11], v[12]).
+ ldr r10, [sp, #16] // load v[12]
+ _blake2s_quarterround r0, r5, r8, r11, r1, r6, r9, r10, \
+ \s8, \s9, \s10, \s11
+ __strd r8, r9, sp, 8
+ str r11, [sp, #28]
+ str r10, [sp, #16]
+
+ // Mix second two diagonals:
+ // (v[2], v[7], v[8], v[13]) and (v[3], v[4], v[9], v[14]).
+ __ldrd r8, r9, sp, 0 // load v[8] and v[9]
+ __ldrd r10, r11, sp, 20 // load v[13] and v[14]
+ _blake2s_quarterround r2, r7, r8, r10, r3, r4, r9, r11, \
+ \s12, \s13, \s14, \s15
+ __strd r10, r11, sp, 20
+.endm
+
+//
+// void blake2s_compress_arch(struct blake2s_state *state,
+// const u8 *block, size_t nblocks, u32 inc);
+//
+// Only the first three fields of struct blake2s_state are used:
+// u32 h[8]; (inout)
+// u32 t[2]; (in)
+// u32 f[2]; (in)
+//
+ .align 5
+ENTRY(blake2s_compress_arch)
+ push {r0-r2,r4-r11,lr} // keep this an even number
+
+.Lnext_block:
+ // r0 is 'state'
+ // r1 is 'block'
+ // r3 is counter increment amount
+
+ // Load and increment the counter t[0..1].
+ __ldrd r10, r11, r0, 32
+ adds r10, r10, r3
+ adc r11, r11, #0
+ __strd r10, r11, r0, 32
+
+ // _blake2s_round is very short on registers, so copy the message block
+ // to the stack to save a register during the rounds. This also has the
+ // advantage that misalignment only needs to be dealt with in one place.
+ sub sp, sp, #64
+ mov r12, sp
+ tst r1, #3
+ bne .Lcopy_block_misaligned
+ ldmia r1!, {r2-r9}
+ stmia r12!, {r2-r9}
+ ldmia r1!, {r2-r9}
+ stmia r12, {r2-r9}
+.Lcopy_block_done:
+ str r1, [sp, #68] // Update message pointer
+
+ // Calculate v[8..15]. Push v[9..15] onto the stack, and leave space
+ // for spilling v[8..9]. Leave v[8..9] in r8-r9.
+ mov r14, r0 // r14 = state
+ adr r12, .Lblake2s_IV
+ ldmia r12!, {r8-r9} // load IV[0..1]
+ __ldrd r0, r1, r14, 40 // load f[0..1]
+ ldm r12, {r2-r7} // load IV[3..7]
+ eor r4, r4, r10 // v[12] = IV[4] ^ t[0]
+ eor r5, r5, r11 // v[13] = IV[5] ^ t[1]
+ eor r6, r6, r0 // v[14] = IV[6] ^ f[0]
+ eor r7, r7, r1 // v[15] = IV[7] ^ f[1]
+ push {r2-r7}
+ sub sp, sp, #8
+
+ // Load h[0..7] == v[0..7].
+ ldm r14, {r0-r7}
+
+ // Execute the rounds. Each round is provided the order in which it
+ // needs to use the message words.
+ .set brot, 0
+ .set drot, 0
+ _blake2s_round 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15
+ _blake2s_round 14, 10, 4, 8, 9, 15, 13, 6, 1, 12, 0, 2, 11, 7, 5, 3
+ _blake2s_round 11, 8, 12, 0, 5, 2, 15, 13, 10, 14, 3, 6, 7, 1, 9, 4
+ _blake2s_round 7, 9, 3, 1, 13, 12, 11, 14, 2, 6, 5, 10, 4, 0, 15, 8
+ _blake2s_round 9, 0, 5, 7, 2, 4, 10, 15, 14, 1, 11, 12, 6, 8, 3, 13
+ _blake2s_round 2, 12, 6, 10, 0, 11, 8, 3, 4, 13, 7, 5, 15, 14, 1, 9
+ _blake2s_round 12, 5, 1, 15, 14, 13, 4, 10, 0, 7, 6, 3, 9, 2, 8, 11
+ _blake2s_round 13, 11, 7, 14, 12, 1, 3, 9, 5, 0, 15, 4, 8, 6, 2, 10
+ _blake2s_round 6, 15, 14, 9, 11, 3, 0, 8, 12, 2, 13, 7, 1, 4, 10, 5
+ _blake2s_round 10, 2, 8, 4, 7, 6, 1, 5, 15, 11, 9, 14, 3, 12, 13, 0
+
+ // Fold the final state matrix into the hash chaining value:
+ //
+ // for (i = 0; i < 8; i++)
+ // h[i] ^= v[i] ^ v[i + 8];
+ //
+ ldr r14, [sp, #96] // r14 = &h[0]
+ add sp, sp, #8 // v[8..9] are already loaded.
+ pop {r10-r11} // load v[10..11]
+ eor r0, r0, r8
+ eor r1, r1, r9
+ eor r2, r2, r10
+ eor r3, r3, r11
+ ldm r14, {r8-r11} // load h[0..3]
+ eor r0, r0, r8
+ eor r1, r1, r9
+ eor r2, r2, r10
+ eor r3, r3, r11
+ stmia r14!, {r0-r3} // store new h[0..3]
+ ldm r14, {r0-r3} // load old h[4..7]
+ pop {r8-r11} // load v[12..15]
+ eor r0, r0, r4, ror #brot
+ eor r1, r1, r5, ror #brot
+ eor r2, r2, r6, ror #brot
+ eor r3, r3, r7, ror #brot
+ eor r0, r0, r8, ror #drot
+ eor r1, r1, r9, ror #drot
+ eor r2, r2, r10, ror #drot
+ eor r3, r3, r11, ror #drot
+ add sp, sp, #64 // skip copy of message block
+ stm r14, {r0-r3} // store new h[4..7]
+
+ ldm sp, {r0, r1, r2} // load (state, block, nblocks)
+ mov r3, #64 // set counter increment amount
+ subs r2, r2, #1 // nblocks--
+ str r2, [sp, #8]
+ bne .Lnext_block // nblocks != 0?
+
+ pop {r0-r2,r4-r11,pc}
+
+ // The message block isn't 4-byte aligned, so it can't be loaded using
+ // ldmia. Copy it to the stack using an alternative method.
+.Lcopy_block_misaligned:
+ mov r2, #64
+1:
+#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
+ ldr r3, [r1], #4
+#else
+ ldrb r3, [r1, #0]
+ ldrb r4, [r1, #1]
+ ldrb r5, [r1, #2]
+ ldrb r6, [r1, #3]
+ add r1, r1, #4
+ orr r3, r3, r4, lsl #8
+ orr r3, r3, r5, lsl #16
+ orr r3, r3, r6, lsl #24
+#endif
+ subs r2, r2, #4
+ str r3, [r12], #4
+ bne 1b
+ b .Lcopy_block_done
+ENDPROC(blake2s_compress_arch)
diff --git a/arch/arm/crypto/blake2s-glue.c b/arch/arm/crypto/blake2s-glue.c
new file mode 100644
index 0000000000000..f2cc1e5fc9ec1
--- /dev/null
+++ b/arch/arm/crypto/blake2s-glue.c
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * BLAKE2s digest algorithm, ARM scalar implementation
+ *
+ * Copyright 2020 Google LLC
+ */
+
+#include <crypto/internal/blake2s.h>
+#include <crypto/internal/hash.h>
+
+#include <linux/module.h>
+
+/* defined in blake2s-core.S */
+EXPORT_SYMBOL(blake2s_compress_arch);
+
+static int crypto_blake2s_update_arm(struct shash_desc *desc,
+ const u8 *in, unsigned int inlen)
+{
+ return crypto_blake2s_update(desc, in, inlen, blake2s_compress_arch);
+}
+
+static int crypto_blake2s_final_arm(struct shash_desc *desc, u8 *out)
+{
+ return crypto_blake2s_final(desc, out, blake2s_compress_arch);
+}
+
+#define BLAKE2S_ALG(name, driver_name, digest_size) \
+ { \
+ .base.cra_name = name, \
+ .base.cra_driver_name = driver_name, \
+ .base.cra_priority = 200, \
+ .base.cra_flags = CRYPTO_ALG_OPTIONAL_KEY, \
+ .base.cra_blocksize = BLAKE2S_BLOCK_SIZE, \
+ .base.cra_ctxsize = sizeof(struct blake2s_tfm_ctx), \
+ .base.cra_module = THIS_MODULE, \
+ .digestsize = digest_size, \
+ .setkey = crypto_blake2s_setkey, \
+ .init = crypto_blake2s_init, \
+ .update = crypto_blake2s_update_arm, \
+ .final = crypto_blake2s_final_arm, \
+ .descsize = sizeof(struct blake2s_state), \
+ }
+
+static struct shash_alg blake2s_arm_algs[] = {
+ BLAKE2S_ALG("blake2s-128", "blake2s-128-arm", BLAKE2S_128_HASH_SIZE),
+ BLAKE2S_ALG("blake2s-160", "blake2s-160-arm", BLAKE2S_160_HASH_SIZE),
+ BLAKE2S_ALG("blake2s-224", "blake2s-224-arm", BLAKE2S_224_HASH_SIZE),
+ BLAKE2S_ALG("blake2s-256", "blake2s-256-arm", BLAKE2S_256_HASH_SIZE),
+};
+
+static int __init blake2s_arm_mod_init(void)
+{
+ return IS_REACHABLE(CONFIG_CRYPTO_HASH) ?
+ crypto_register_shashes(blake2s_arm_algs,
+ ARRAY_SIZE(blake2s_arm_algs)) : 0;
+}
+
+static void __exit blake2s_arm_mod_exit(void)
+{
+ if (IS_REACHABLE(CONFIG_CRYPTO_HASH))
+ crypto_unregister_shashes(blake2s_arm_algs,
+ ARRAY_SIZE(blake2s_arm_algs));
+}
+
+module_init(blake2s_arm_mod_init);
+module_exit(blake2s_arm_mod_exit);
+
+MODULE_DESCRIPTION("BLAKE2s digest algorithm, ARM scalar implementation");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Eric Biggers <ebiggers@xxxxxxxxxx>");
+MODULE_ALIAS_CRYPTO("blake2s-128");
+MODULE_ALIAS_CRYPTO("blake2s-128-arm");
+MODULE_ALIAS_CRYPTO("blake2s-160");
+MODULE_ALIAS_CRYPTO("blake2s-160-arm");
+MODULE_ALIAS_CRYPTO("blake2s-224");
+MODULE_ALIAS_CRYPTO("blake2s-224-arm");
+MODULE_ALIAS_CRYPTO("blake2s-256");
+MODULE_ALIAS_CRYPTO("blake2s-256-arm");
--
2.29.2
