On 2020-12-14 8:04 a.m., matthias.bgg@xxxxxxxxxx wrote: > From: Matthias Brugger <mbrugger@xxxxxxxx> > > When trying to disable the block we bitwise or the control > register with value zero. This will leave the block always turned on. > Fix this by setting the corresponding bit to zero. > > Fixes: c83d45d5685f ("hwrng: iproc-rng200 - Add Broadcom IPROC RNG driver") Commit message needs to be re-written. I don't think this is an actual fix as the ~RNG_CTL_RNG_RBGEN_MASK already zeros the bit. This is just a code change, which is fine because it makes things clearer > Signed-off-by: Matthias Brugger <mbrugger@xxxxxxxx> > --- > > drivers/char/hw_random/iproc-rng200.c | 5 ++--- > 1 file changed, 2 insertions(+), 3 deletions(-) > > diff --git a/drivers/char/hw_random/iproc-rng200.c b/drivers/char/hw_random/iproc-rng200.c > index 01583faf9893..e106ce3c0146 100644 > --- a/drivers/char/hw_random/iproc-rng200.c > +++ b/drivers/char/hw_random/iproc-rng200.c > @@ -28,7 +28,6 @@ > #define RNG_CTRL_OFFSET 0x00 > #define RNG_CTRL_RNG_RBGEN_MASK 0x00001FFF > #define RNG_CTRL_RNG_RBGEN_ENABLE 0x00000001 > -#define RNG_CTRL_RNG_RBGEN_DISABLE 0x00000000 > > #define RNG_SOFT_RESET_OFFSET 0x04 > #define RNG_SOFT_RESET 0x00000001 > @@ -61,7 +60,7 @@ static void iproc_rng200_restart(void __iomem *rng_base) > /* Disable RBG */ > val = ioread32(rng_base + RNG_CTRL_OFFSET); > val &= ~RNG_CTRL_RNG_RBGEN_MASK; This mask will already zero the enable bit. > - val |= RNG_CTRL_RNG_RBGEN_DISABLE; > + val &= ~RNG_CTRL_RNG_RBGEN_ENABLE; > iowrite32(val, rng_base + RNG_CTRL_OFFSET); > > /* Clear all interrupt status */ > @@ -174,7 +173,7 @@ static void iproc_rng200_cleanup(struct hwrng *rng) > /* Disable RNG hardware */ > val = ioread32(priv->base + RNG_CTRL_OFFSET); > val &= ~RNG_CTRL_RNG_RBGEN_MASK; > - val |= RNG_CTRL_RNG_RBGEN_DISABLE; > + val &= ~RNG_CTRL_RNG_RBGEN_ENABLE; > iowrite32(val, priv->base + RNG_CTRL_OFFSET); > } >