Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@xxxxxxxxxxxx>
---
Continuing my work started at 93431e0607e5.
See also: git log --oneline '--author=Alexander A. Klimov <grandmaster@xxxxxxxxxxxx>' v5.7..master
(Actually letting a shell for loop submit all this stuff for me.)
If there are any URLs to be removed completely
or at least not (just) HTTPSified:
Just clearly say so and I'll *undo my change*.
See also: https://lkml.org/lkml/2020/6/27/64
If there are any valid, but yet not changed URLs:
See: https://lkml.org/lkml/2020/6/26/837
If you apply the patch, please let me know.
Sorry again to all maintainers who complained about subject lines.
Now I realized that you want an actually perfect prefixes,
not just subsystem ones.
I tried my best...
And yes, *I could* (at least half-)automate it.
Impossible is nothing! :)
Documentation/crypto/api-intro.txt | 4 +--
Documentation/crypto/userspace-if.rst | 4 +--
arch/arm/crypto/crc32-ce-core.S | 2 +-
arch/arm/crypto/sha1-armv4-large.S | 2 +-
arch/arm/crypto/sha256-armv4.pl | 2 +-
arch/arm/crypto/sha256-core.S_shipped | 2 +-
arch/arm/crypto/sha512-armv4.pl | 4 +--
arch/arm/crypto/sha512-core.S_shipped | 4 +--
crypto/Kconfig | 46 +++++++++++++--------------
crypto/blake2b_generic.c | 2 +-
crypto/camellia_generic.c | 2 +-
crypto/ecc.c | 2 +-
crypto/jitterentropy.c | 4 +--
crypto/lrw.c | 2 +-
crypto/salsa20_generic.c | 4 +--
crypto/sha3_generic.c | 2 +-
16 files changed, 44 insertions(+), 44 deletions(-)
diff --git a/Documentation/crypto/api-intro.txt b/Documentation/crypto/api-intro.txt
index 45d943fcae5b..48ff83e8aec6 100644
--- a/Documentation/crypto/api-intro.txt
+++ b/Documentation/crypto/api-intro.txt
@@ -169,7 +169,7 @@ Portions of this API were derived from the following projects:
and;
- Nettle (http://www.lysator.liu.se/~nisse/nettle/)
+ Nettle (https://www.lysator.liu.se/~nisse/nettle/)
Niels Möller
Original developers of the crypto algorithms:
diff --git a/Documentation/crypto/userspace-if.rst b/Documentation/crypto/userspace-if.rst
index ff86befa61e0..52019e905900 100644
--- a/Documentation/crypto/userspace-if.rst
+++ b/Documentation/crypto/userspace-if.rst
@@ -23,7 +23,7 @@ user space, however. This includes the difference between synchronous
and asynchronous invocations. The user space API call is fully
synchronous.
-[1] http://www.chronox.de/libkcapi.html
+[1] https://www.chronox.de/libkcapi.html
User Space API General Remarks
------------------------------
@@ -384,4 +384,4 @@ Please see [1] for libkcapi which provides an easy-to-use wrapper around
the aforementioned Netlink kernel interface. [1] also contains a test
application that invokes all libkcapi API calls.
-[1] http://www.chronox.de/libkcapi.html
+[1] https://www.chronox.de/libkcapi.html
diff --git a/arch/arm/crypto/crc32-ce-core.S b/arch/arm/crypto/crc32-ce-core.S
index 5cbd4a6fedad..3f13a76b9066 100644
--- a/arch/arm/crypto/crc32-ce-core.S
+++ b/arch/arm/crypto/crc32-ce-core.S
@@ -39,7 +39,7 @@
* CRC32 polynomial:0x04c11db7(BE)/0xEDB88320(LE)
* PCLMULQDQ is a new instruction in Intel SSE4.2, the reference can be found
* at:
- * http://www.intel.com/products/processor/manuals/
+ * https://www.intel.com/products/processor/manuals/
* Intel(R) 64 and IA-32 Architectures Software Developer's Manual
* Volume 2B: Instruction Set Reference, N-Z
*
diff --git a/arch/arm/crypto/sha1-armv4-large.S b/arch/arm/crypto/sha1-armv4-large.S
index f82cd8cf5a09..1c8b685149f2 100644
--- a/arch/arm/crypto/sha1-armv4-large.S
+++ b/arch/arm/crypto/sha1-armv4-large.S
@@ -13,7 +13,7 @@
@ Written by Andy Polyakov <appro@xxxxxxxxxxxxxx> for the OpenSSL
@ project. The module is, however, dual licensed under OpenSSL and
@ CRYPTOGAMS licenses depending on where you obtain it. For further
-@ details see http://www.openssl.org/~appro/cryptogams/.
+@ details see https://www.openssl.org/~appro/cryptogams/.
@ ====================================================================
@ sha1_block procedure for ARMv4.
diff --git a/arch/arm/crypto/sha256-armv4.pl b/arch/arm/crypto/sha256-armv4.pl
index a03cf4dfb781..9f96ff48e4a8 100644
--- a/arch/arm/crypto/sha256-armv4.pl
+++ b/arch/arm/crypto/sha256-armv4.pl
@@ -13,7 +13,7 @@
# Written by Andy Polyakov <appro@xxxxxxxxxxx> for the OpenSSL
# project. The module is, however, dual licensed under OpenSSL and
# CRYPTOGAMS licenses depending on where you obtain it. For further
-# details see http://www.openssl.org/~appro/cryptogams/.
+# details see https://www.openssl.org/~appro/cryptogams/.
# ====================================================================
# SHA256 block procedure for ARMv4. May 2007.
diff --git a/arch/arm/crypto/sha256-core.S_shipped b/arch/arm/crypto/sha256-core.S_shipped
index 054aae0edfce..ea04b2ab0c33 100644
--- a/arch/arm/crypto/sha256-core.S_shipped
+++ b/arch/arm/crypto/sha256-core.S_shipped
@@ -12,7 +12,7 @@
@ Written by Andy Polyakov <appro@xxxxxxxxxxx> for the OpenSSL
@ project. The module is, however, dual licensed under OpenSSL and
@ CRYPTOGAMS licenses depending on where you obtain it. For further
-@ details see http://www.openssl.org/~appro/cryptogams/.
+@ details see https://www.openssl.org/~appro/cryptogams/.
@ ====================================================================
@ SHA256 block procedure for ARMv4. May 2007.
diff --git a/arch/arm/crypto/sha512-armv4.pl b/arch/arm/crypto/sha512-armv4.pl
index 788c17b56ecc..69df68981acd 100644
--- a/arch/arm/crypto/sha512-armv4.pl
+++ b/arch/arm/crypto/sha512-armv4.pl
@@ -13,7 +13,7 @@
# Written by Andy Polyakov <appro@xxxxxxxxxxx> for the OpenSSL
# project. The module is, however, dual licensed under OpenSSL and
# CRYPTOGAMS licenses depending on where you obtain it. For further
-# details see http://www.openssl.org/~appro/cryptogams/.
+# details see https://www.openssl.org/~appro/cryptogams/.
# ====================================================================
# SHA512 block procedure for ARMv4. September 2007.
@@ -43,7 +43,7 @@
# terms it's 22.6 cycles per byte, which is disappointing result.
# Technical writers asserted that 3-way S4 pipeline can sustain
# multiple NEON instructions per cycle, but dual NEON issue could
-# not be observed, see http://www.openssl.org/~appro/Snapdragon-S4.html
+# not be observed, see https://www.openssl.org/~appro/Snapdragon-S4.html
# for further details. On side note Cortex-A15 processes one byte in
# 16 cycles.
diff --git a/arch/arm/crypto/sha512-core.S_shipped b/arch/arm/crypto/sha512-core.S_shipped
index 710ea309769e..cb147db5cbfe 100644
--- a/arch/arm/crypto/sha512-core.S_shipped
+++ b/arch/arm/crypto/sha512-core.S_shipped
@@ -12,7 +12,7 @@
@ Written by Andy Polyakov <appro@xxxxxxxxxxx> for the OpenSSL
@ project. The module is, however, dual licensed under OpenSSL and
@ CRYPTOGAMS licenses depending on where you obtain it. For further
-@ details see http://www.openssl.org/~appro/cryptogams/.
+@ details see https://www.openssl.org/~appro/cryptogams/.
@ ====================================================================
@ SHA512 block procedure for ARMv4. September 2007.
@@ -42,7 +42,7 @@
@ terms it's 22.6 cycles per byte, which is disappointing result.
@ Technical writers asserted that 3-way S4 pipeline can sustain
@ multiple NEON instructions per cycle, but dual NEON issue could
-@ not be observed, see http://www.openssl.org/~appro/Snapdragon-S4.html
+@ not be observed, see https://www.openssl.org/~appro/Snapdragon-S4.html
@ for further details. On side note Cortex-A15 processes one byte in
@ 16 cycles.
diff --git a/crypto/Kconfig b/crypto/Kconfig
index 091c0a0bbf26..1b57419fa2e7 100644
--- a/crypto/Kconfig
+++ b/crypto/Kconfig
@@ -548,7 +548,7 @@ config CRYPTO_XCBC
select CRYPTO_MANAGER
help
XCBC: Keyed-Hashing with encryption algorithm
- http://www.ietf.org/rfc/rfc3566.txt
+ https://www.ietf.org/rfc/rfc3566.txt
http://csrc.nist.gov/encryption/modes/proposedmodes/
xcbc-mac/xcbc-mac-spec.pdf
@@ -561,7 +561,7 @@ config CRYPTO_VMAC
very high speed on 64-bit architectures.
See also:
- <http://fastcrypto.org/vmac>
+ <https://fastcrypto.org/vmac>
comment "Digest"
@@ -816,7 +816,7 @@ config CRYPTO_RMD128
RIPEMD-160 should be used.
Developed by Hans Dobbertin, Antoon Bosselaers and Bart Preneel.
- See <http://homes.esat.kuleuven.be/~bosselae/ripemd160.html>
+ See <https://homes.esat.kuleuven.be/~bosselae/ripemd160.html>
config CRYPTO_RMD160
tristate "RIPEMD-160 digest algorithm"
@@ -833,7 +833,7 @@ config CRYPTO_RMD160
against RIPEMD-160.
Developed by Hans Dobbertin, Antoon Bosselaers and Bart Preneel.
- See <http://homes.esat.kuleuven.be/~bosselae/ripemd160.html>
+ See <https://homes.esat.kuleuven.be/~bosselae/ripemd160.html>
config CRYPTO_RMD256
tristate "RIPEMD-256 digest algorithm"
@@ -845,7 +845,7 @@ config CRYPTO_RMD256
(than RIPEMD-128).
Developed by Hans Dobbertin, Antoon Bosselaers and Bart Preneel.
- See <http://homes.esat.kuleuven.be/~bosselae/ripemd160.html>
+ See <https://homes.esat.kuleuven.be/~bosselae/ripemd160.html>
config CRYPTO_RMD320
tristate "RIPEMD-320 digest algorithm"
@@ -857,7 +857,7 @@ config CRYPTO_RMD320
(than RIPEMD-160).
Developed by Hans Dobbertin, Antoon Bosselaers and Bart Preneel.
- See <http://homes.esat.kuleuven.be/~bosselae/ripemd160.html>
+ See <https://homes.esat.kuleuven.be/~bosselae/ripemd160.html>
config CRYPTO_SHA1
tristate "SHA1 digest algorithm"
@@ -1045,7 +1045,7 @@ config CRYPTO_TGR192
Tiger was developed by Ross Anderson and Eli Biham.
See also:
- <http://www.cs.technion.ac.il/~biham/Reports/Tiger/>.
+ <https://www.cs.technion.ac.il/~biham/Reports/Tiger/>.
config CRYPTO_WP512
tristate "Whirlpool digest algorithms"
@@ -1221,7 +1221,7 @@ config CRYPTO_BLOWFISH
designed for use on "large microprocessors".
See also:
- <http://www.schneier.com/blowfish.html>
+ <https://www.schneier.com/blowfish.html>
config CRYPTO_BLOWFISH_COMMON
tristate
@@ -1230,7 +1230,7 @@ config CRYPTO_BLOWFISH_COMMON
generic c and the assembler implementations.
See also:
- <http://www.schneier.com/blowfish.html>
+ <https://www.schneier.com/blowfish.html>
config CRYPTO_BLOWFISH_X86_64
tristate "Blowfish cipher algorithm (x86_64)"
@@ -1245,7 +1245,7 @@ config CRYPTO_BLOWFISH_X86_64
designed for use on "large microprocessors".
See also:
- <http://www.schneier.com/blowfish.html>
+ <https://www.schneier.com/blowfish.html>
config CRYPTO_CAMELLIA
tristate "Camellia cipher algorithms"
@@ -1441,10 +1441,10 @@ config CRYPTO_SALSA20
Salsa20 stream cipher algorithm.
Salsa20 is a stream cipher submitted to eSTREAM, the ECRYPT
- Stream Cipher Project. See <http://www.ecrypt.eu.org/stream/>
+ Stream Cipher Project. See <https://www.ecrypt.eu.org/stream/>
The Salsa20 stream cipher algorithm is designed by Daniel J.
- Bernstein <djb@xxxxxxxx>. See <http://cr.yp.to/snuffle.html>
+ Bernstein <djb@xxxxxxxx>. See <https://cr.yp.to/snuffle.html>
config CRYPTO_CHACHA20
tristate "ChaCha stream cipher algorithms"
@@ -1456,7 +1456,7 @@ config CRYPTO_CHACHA20
ChaCha20 is a 256-bit high-speed stream cipher designed by Daniel J.
Bernstein and further specified in RFC7539 for use in IETF protocols.
This is the portable C implementation of ChaCha20. See also:
- <http://cr.yp.to/chacha/chacha-20080128.pdf>
+ <https://cr.yp.to/chacha/chacha-20080128.pdf>
XChaCha20 is the application of the XSalsa20 construction to ChaCha20
rather than to Salsa20. XChaCha20 extends ChaCha20's nonce length
@@ -1509,7 +1509,7 @@ config CRYPTO_SERPENT
variant of Serpent for compatibility with old kerneli.org code.
See also:
- <http://www.cl.cam.ac.uk/~rja14/serpent.html>
+ <https://www.cl.cam.ac.uk/~rja14/serpent.html>
config CRYPTO_SERPENT_SSE2_X86_64
tristate "Serpent cipher algorithm (x86_64/SSE2)"
@@ -1528,7 +1528,7 @@ config CRYPTO_SERPENT_SSE2_X86_64
blocks parallel using SSE2 instruction set.
See also:
- <http://www.cl.cam.ac.uk/~rja14/serpent.html>
+ <https://www.cl.cam.ac.uk/~rja14/serpent.html>
config CRYPTO_SERPENT_SSE2_586
tristate "Serpent cipher algorithm (i586/SSE2)"
@@ -1547,7 +1547,7 @@ config CRYPTO_SERPENT_SSE2_586
blocks parallel using SSE2 instruction set.
See also:
- <http://www.cl.cam.ac.uk/~rja14/serpent.html>
+ <https://www.cl.cam.ac.uk/~rja14/serpent.html>
config CRYPTO_SERPENT_AVX_X86_64
tristate "Serpent cipher algorithm (x86_64/AVX)"
@@ -1567,7 +1567,7 @@ config CRYPTO_SERPENT_AVX_X86_64
eight blocks parallel using the AVX instruction set.
See also:
- <http://www.cl.cam.ac.uk/~rja14/serpent.html>
+ <https://www.cl.cam.ac.uk/~rja14/serpent.html>
config CRYPTO_SERPENT_AVX2_X86_64
tristate "Serpent cipher algorithm (x86_64/AVX2)"
@@ -1583,7 +1583,7 @@ config CRYPTO_SERPENT_AVX2_X86_64
blocks parallel using AVX2 instruction set.
See also:
- <http://www.cl.cam.ac.uk/~rja14/serpent.html>
+ <https://www.cl.cam.ac.uk/~rja14/serpent.html>
config CRYPTO_SM4
tristate "SM4 cipher algorithm"
@@ -1640,7 +1640,7 @@ config CRYPTO_TWOFISH
bits.
See also:
- <http://www.schneier.com/twofish.html>
+ <https://www.schneier.com/twofish.html>
config CRYPTO_TWOFISH_COMMON
tristate
@@ -1662,7 +1662,7 @@ config CRYPTO_TWOFISH_586
bits.
See also:
- <http://www.schneier.com/twofish.html>
+ <https://www.schneier.com/twofish.html>
config CRYPTO_TWOFISH_X86_64
tristate "Twofish cipher algorithm (x86_64)"
@@ -1678,7 +1678,7 @@ config CRYPTO_TWOFISH_X86_64
bits.
See also:
- <http://www.schneier.com/twofish.html>
+ <https://www.schneier.com/twofish.html>
config CRYPTO_TWOFISH_X86_64_3WAY
tristate "Twofish cipher algorithm (x86_64, 3-way parallel)"
@@ -1699,7 +1699,7 @@ config CRYPTO_TWOFISH_X86_64_3WAY
blocks parallel, utilizing resources of out-of-order CPUs better.
See also:
- <http://www.schneier.com/twofish.html>
+ <https://www.schneier.com/twofish.html>
config CRYPTO_TWOFISH_AVX_X86_64
tristate "Twofish cipher algorithm (x86_64/AVX)"
@@ -1722,7 +1722,7 @@ config CRYPTO_TWOFISH_AVX_X86_64
eight blocks parallel using the AVX Instruction Set.
See also:
- <http://www.schneier.com/twofish.html>
+ <https://www.schneier.com/twofish.html>
comment "Compression"
diff --git a/crypto/blake2b_generic.c b/crypto/blake2b_generic.c
index 0ffd8d92e308..a2ffe60e06d3 100644
--- a/crypto/blake2b_generic.c
+++ b/crypto/blake2b_generic.c
@@ -8,7 +8,7 @@
*
* - CC0 1.0 Universal : http://creativecommons.org/publicdomain/zero/1.0
* - OpenSSL license : https://www.openssl.org/source/license.html
- * - Apache 2.0 : http://www.apache.org/licenses/LICENSE-2.0
+ * - Apache 2.0 : https://www.apache.org/licenses/LICENSE-2.0
*
* More information about the BLAKE2 hash function can be found at
* https://blake2.net.
diff --git a/crypto/camellia_generic.c b/crypto/camellia_generic.c
index 9a5783e5196a..0b9f409f7370 100644
--- a/crypto/camellia_generic.c
+++ b/crypto/camellia_generic.c
@@ -6,7 +6,7 @@
/*
* Algorithm Specification
- * http://info.isl.ntt.co.jp/crypt/eng/camellia/specifications.html
+ * https://info.isl.ntt.co.jp/crypt/eng/camellia/specifications.html
*/
/*
diff --git a/crypto/ecc.c b/crypto/ecc.c
index 02d35be7702b..86c324936a2b 100644
--- a/crypto/ecc.c
+++ b/crypto/ecc.c
@@ -940,7 +940,7 @@ static bool ecc_point_is_zero(const struct ecc_point *point)
}
/* Point multiplication algorithm using Montgomery's ladder with co-Z
- * coordinates. From http://eprint.iacr.org/2011/338.pdf
+ * coordinates. From https://eprint.iacr.org/2011/338.pdf
*/
/* Double in place */
diff --git a/crypto/jitterentropy.c b/crypto/jitterentropy.c
index 57f4a1ac738b..6e147c43fc18 100644
--- a/crypto/jitterentropy.c
+++ b/crypto/jitterentropy.c
@@ -7,7 +7,7 @@
* Design
* ======
*
- * See http://www.chronox.de/jent.html
+ * See https://www.chronox.de/jent.html
*
* License
* =======
@@ -47,7 +47,7 @@
/*
* This Jitterentropy RNG is based on the jitterentropy library
- * version 2.2.0 provided at http://www.chronox.de/jent.html
+ * version 2.2.0 provided at https://www.chronox.de/jent.html
*/
#ifdef __OPTIMIZE__
diff --git a/crypto/lrw.c b/crypto/lrw.c
index 5b07a7c09296..b0ee65445aaf 100644
--- a/crypto/lrw.c
+++ b/crypto/lrw.c
@@ -9,7 +9,7 @@
*/
/* This implementation is checked against the test vectors in the above
* document and by a test vector provided by Ken Buchanan at
- * http://www.mail-archive.com/stds-p1619@xxxxxxxxxxxxxxxxx/msg00173.html
+ * https://www.mail-archive.com/stds-p1619@xxxxxxxxxxxxxxxxx/msg00173.html
*
* The test vectors are included in the testing module tcrypt.[ch] */
diff --git a/crypto/salsa20_generic.c b/crypto/salsa20_generic.c
index c81a44404086..3418869dabef 100644
--- a/crypto/salsa20_generic.c
+++ b/crypto/salsa20_generic.c
@@ -9,8 +9,8 @@
* Salsa20 is a stream cipher candidate in eSTREAM, the ECRYPT Stream
* Cipher Project. It is designed by Daniel J. Bernstein <djb@xxxxxxxx>.
* More information about eSTREAM and Salsa20 can be found here:
- * http://www.ecrypt.eu.org/stream/
- * http://cr.yp.to/snuffle.html
+ * https://www.ecrypt.eu.org/stream/
+ * https://cr.yp.to/snuffle.html
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
diff --git a/crypto/sha3_generic.c b/crypto/sha3_generic.c
index 44e263e25599..3e4069935b53 100644
--- a/crypto/sha3_generic.c
+++ b/crypto/sha3_generic.c
@@ -3,7 +3,7 @@
* Cryptographic API.
*
* SHA-3, as specified in
- * http://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FIPS.202.pdf
+ * https://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FIPS.202.pdf
*
* SHA-3 code by Jeff Garzik <jeff@xxxxxxxxxx>
* Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx>
--
2.27.0
