From: Hui Tang <tanghui20@xxxxxxxxxx>
for Hi1620 hardware, we should disable these hardware flr:
1. BME_FLR - bit 7,
2. PM_FLR - bit 11,
3. SRIOV_FLR - bit 12,
Or HPRE may goto D3 state, when we bind and unbind HPRE quickly,
as it does FLR triggered by BME/PM/SRIOV.
Fixes: c8b4b477079d("crypto: hisilicon - add HiSilicon HPRE accelerator")
Signed-off-by: Hui Tang <tanghui20@xxxxxxxxxx>
Signed-off-by: Meng Yu <yumeng18@xxxxxxxxxx>
Reviewed-by: Zaibo Xu <xuzaibo@xxxxxxxxxx>
---
drivers/crypto/hisilicon/hpre/hpre_main.c | 26 ++++++++++++++++++++++----
1 file changed, 22 insertions(+), 4 deletions(-)
diff --git a/drivers/crypto/hisilicon/hpre/hpre_main.c b/drivers/crypto/hisilicon/hpre/hpre_main.c
index b69cea3..b135c74 100644
--- a/drivers/crypto/hisilicon/hpre/hpre_main.c
+++ b/drivers/crypto/hisilicon/hpre/hpre_main.c
@@ -82,6 +82,10 @@
#define HPRE_CORE_ECC_2BIT_ERR BIT(1)
#define HPRE_OOO_ECC_2BIT_ERR BIT(5)
+#define HPRE_QM_BME_FLR BIT(7)
+#define HPRE_QM_PM_FLR BIT(11)
+#define HPRE_QM_SRIOV_FLR BIT(12)
+
#define HPRE_VIA_MSI_DSM 1
#define HPRE_SQE_MASK_OFFSET 8
#define HPRE_SQE_MASK_LEN 24
@@ -230,6 +234,22 @@ static int hpre_cfg_by_dsm(struct hisi_qm *qm)
return 0;
}
+/*
+ * For Hi1620, we shoul disable FLR triggered by hardware (BME/PM/SRIOV).
+ * Or it may stay in D3 state when we bind and unbind hpre quickly,
+ * as it does FLR triggered by hardware.
+ */
+static void disable_flr_of_bme(struct hisi_qm *qm)
+{
+ u32 val;
+
+ val = readl(HPRE_ADDR(qm, QM_PEH_AXUSER_CFG));
+ val &= ~(HPRE_QM_BME_FLR | HPRE_QM_SRIOV_FLR);
+ val |= HPRE_QM_PM_FLR;
+ writel(val, HPRE_ADDR(qm, QM_PEH_AXUSER_CFG));
+ writel(PEH_AXUSER_CFG_ENABLE, HPRE_ADDR(qm, QM_PEH_AXUSER_CFG_ENABLE));
+}
+
static int hpre_set_user_domain_and_cache(struct hisi_qm *qm)
{
struct device *dev = &qm->pdev->dev;
@@ -241,10 +261,6 @@ static int hpre_set_user_domain_and_cache(struct hisi_qm *qm)
writel(HPRE_QM_USR_CFG_MASK, HPRE_ADDR(qm, QM_AWUSER_M_CFG_ENABLE));
writel_relaxed(HPRE_QM_AXI_CFG_MASK, HPRE_ADDR(qm, QM_AXI_M_CFG));
- /* disable FLR triggered by BME(bus master enable) */
- writel(PEH_AXUSER_CFG, HPRE_ADDR(qm, QM_PEH_AXUSER_CFG));
- writel(PEH_AXUSER_CFG_ENABLE, HPRE_ADDR(qm, QM_PEH_AXUSER_CFG_ENABLE));
-
/* HPRE need more time, we close this interrupt */
val = readl_relaxed(HPRE_ADDR(qm, HPRE_QM_ABNML_INT_MASK));
val |= BIT(HPRE_TIMEOUT_ABNML_BIT);
@@ -295,6 +311,8 @@ static int hpre_set_user_domain_and_cache(struct hisi_qm *qm)
if (ret)
dev_err(dev, "acpi_evaluate_dsm err.\n");
+ disable_flr_of_bme(qm);
+
return ret;
}
--
2.8.1
