In an effort to clarify and simplify the annotation of assembly functions
in the kernel new macros have been introduced. These replace ENTRY and
ENDPROC and also add a new annotation for static functions which previously
had no ENTRY equivalent. Update the annotations in the core kernel code to
the new macros.
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
---
arch/arm64/kernel/head.S | 56 ++++++++++++++++++++--------------------
1 file changed, 28 insertions(+), 28 deletions(-)
diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S
index 989b1944cb71..716c946c98e9 100644
--- a/arch/arm64/kernel/head.S
+++ b/arch/arm64/kernel/head.S
@@ -275,7 +275,7 @@ ENDPROC(preserve_boot_args)
* - first few MB of the kernel linear mapping to jump to once the MMU has
* been enabled
*/
-__create_page_tables:
+SYM_FUNC_START_LOCAL(__create_page_tables)
mov x28, lr
/*
@@ -403,7 +403,7 @@ __create_page_tables:
bl __inval_dcache_area
ret x28
-ENDPROC(__create_page_tables)
+SYM_FUNC_END(__create_page_tables)
.ltorg
/*
@@ -411,7 +411,7 @@ ENDPROC(__create_page_tables)
*
* x0 = __PHYS_OFFSET
*/
-__primary_switched:
+SYM_FUNC_START_LOCAL(__primary_switched)
adrp x4, init_thread_union
add sp, x4, #THREAD_SIZE
adr_l x5, init_task
@@ -456,7 +456,7 @@ __primary_switched:
mov x29, #0
mov x30, #0
b start_kernel
-ENDPROC(__primary_switched)
+SYM_FUNC_END(__primary_switched)
/*
* end early head section, begin head code that is also used for
@@ -475,7 +475,7 @@ EXPORT_SYMBOL(kimage_vaddr)
* Returns either BOOT_CPU_MODE_EL1 or BOOT_CPU_MODE_EL2 in w0 if
* booted in EL1 or EL2 respectively.
*/
-ENTRY(el2_setup)
+SYM_FUNC_START(el2_setup)
msr SPsel, #1 // We want to use SP_EL{1,2}
mrs x0, CurrentEL
cmp x0, #CurrentEL_EL2
@@ -636,13 +636,13 @@ install_el2_stub:
msr elr_el2, lr
mov w0, #BOOT_CPU_MODE_EL2 // This CPU booted in EL2
eret
-ENDPROC(el2_setup)
+SYM_FUNC_END(el2_setup)
/*
* Sets the __boot_cpu_mode flag depending on the CPU boot mode passed
* in w0. See arch/arm64/include/asm/virt.h for more info.
*/
-set_cpu_boot_mode_flag:
+SYM_FUNC_START_LOCAL(set_cpu_boot_mode_flag)
adr_l x1, __boot_cpu_mode
cmp w0, #BOOT_CPU_MODE_EL2
b.ne 1f
@@ -651,7 +651,7 @@ set_cpu_boot_mode_flag:
dmb sy
dc ivac, x1 // Invalidate potentially stale cache line
ret
-ENDPROC(set_cpu_boot_mode_flag)
+SYM_FUNC_END(set_cpu_boot_mode_flag)
/*
* These values are written with the MMU off, but read with the MMU on.
@@ -683,7 +683,7 @@ ENTRY(__early_cpu_boot_status)
* This provides a "holding pen" for platforms to hold all secondary
* cores are held until we're ready for them to initialise.
*/
-ENTRY(secondary_holding_pen)
+SYM_FUNC_START(secondary_holding_pen)
bl el2_setup // Drop to EL1, w0=cpu_boot_mode
bl set_cpu_boot_mode_flag
mrs x0, mpidr_el1
@@ -695,19 +695,19 @@ pen: ldr x4, [x3]
b.eq secondary_startup
wfe
b pen
-ENDPROC(secondary_holding_pen)
+SYM_FUNC_END(secondary_holding_pen)
/*
* Secondary entry point that jumps straight into the kernel. Only to
* be used where CPUs are brought online dynamically by the kernel.
*/
-ENTRY(secondary_entry)
+SYM_FUNC_START(secondary_entry)
bl el2_setup // Drop to EL1
bl set_cpu_boot_mode_flag
b secondary_startup
-ENDPROC(secondary_entry)
+SYM_FUNC_END(secondary_entry)
-secondary_startup:
+SYM_FUNC_START_LOCAL(secondary_startup)
/*
* Common entry point for secondary CPUs.
*/
@@ -717,9 +717,9 @@ secondary_startup:
bl __enable_mmu
ldr x8, =__secondary_switched
br x8
-ENDPROC(secondary_startup)
+SYM_FUNC_END(secondary_startup)
-__secondary_switched:
+SYM_FUNC_START_LOCAL(__secondary_switched)
adr_l x5, vectors
msr vbar_el1, x5
isb
@@ -734,13 +734,13 @@ __secondary_switched:
mov x29, #0
mov x30, #0
b secondary_start_kernel
-ENDPROC(__secondary_switched)
+SYM_FUNC_END(__secondary_switched)
-__secondary_too_slow:
+SYM_FUNC_START_LOCAL(__secondary_too_slow)
wfe
wfi
b __secondary_too_slow
-ENDPROC(__secondary_too_slow)
+SYM_FUNC_END(__secondary_too_slow)
/*
* The booting CPU updates the failed status @__early_cpu_boot_status,
@@ -772,7 +772,7 @@ ENDPROC(__secondary_too_slow)
* Checks if the selected granule size is supported by the CPU.
* If it isn't, park the CPU
*/
-ENTRY(__enable_mmu)
+SYM_FUNC_START(__enable_mmu)
mrs x2, ID_AA64MMFR0_EL1
ubfx x2, x2, #ID_AA64MMFR0_TGRAN_SHIFT, 4
cmp x2, #ID_AA64MMFR0_TGRAN_SUPPORTED
@@ -796,9 +796,9 @@ ENTRY(__enable_mmu)
dsb nsh
isb
ret
-ENDPROC(__enable_mmu)
+SYM_FUNC_END(__enable_mmu)
-ENTRY(__cpu_secondary_check52bitva)
+SYM_FUNC_START(__cpu_secondary_check52bitva)
#ifdef CONFIG_ARM64_VA_BITS_52
ldr_l x0, vabits_actual
cmp x0, #52
@@ -816,9 +816,9 @@ ENTRY(__cpu_secondary_check52bitva)
#endif
2: ret
-ENDPROC(__cpu_secondary_check52bitva)
+SYM_FUNC_END(__cpu_secondary_check52bitva)
-__no_granule_support:
+SYM_FUNC_START_LOCAL(__no_granule_support)
/* Indicate that this CPU can't boot and is stuck in the kernel */
update_early_cpu_boot_status \
CPU_STUCK_IN_KERNEL | CPU_STUCK_REASON_NO_GRAN, x1, x2
@@ -826,10 +826,10 @@ __no_granule_support:
wfe
wfi
b 1b
-ENDPROC(__no_granule_support)
+SYM_FUNC_END(__no_granule_support)
#ifdef CONFIG_RELOCATABLE
-__relocate_kernel:
+SYM_FUNC_START_LOCAL(__relocate_kernel)
/*
* Iterate over each entry in the relocation table, and apply the
* relocations in place.
@@ -931,10 +931,10 @@ __relocate_kernel:
#endif
ret
-ENDPROC(__relocate_kernel)
+SYM_FUNC_END(__relocate_kernel)
#endif
-__primary_switch:
+SYM_FUNC_START_LOCAL(__primary_switch)
#ifdef CONFIG_RANDOMIZE_BASE
mov x19, x0 // preserve new SCTLR_EL1 value
mrs x20, sctlr_el1 // preserve old SCTLR_EL1 value
@@ -977,4 +977,4 @@ __primary_switch:
ldr x8, =__primary_switched
adrp x0, __PHYS_OFFSET
br x8
-ENDPROC(__primary_switch)
+SYM_FUNC_END(__primary_switch)
--
2.20.1
