Hi Herbert, When can we expect this patch-set to be merged. Regards, Kalyani > -----Original Message----- > From: Kalyani Akula <kalyani.akula@xxxxxxxxxx> > Sent: Tuesday, January 28, 2020 11:48 AM > To: herbert@xxxxxxxxxxxxxxxxxxx; davem@xxxxxxxxxxxxx; > monstr@xxxxxxxxx; linux-crypto@xxxxxxxxxxxxxxx; linux- > kernel@xxxxxxxxxxxxxxx > Cc: Rob Herring <robh+dt@xxxxxxxxxx>; devicetree@xxxxxxxxxxxxxxx; git-dev > <git-dev@xxxxxxxxxx>; Mohan Marutirao Dhanawade > <mohand@xxxxxxxxxx>; Sarat Chand Savitala <saratcha@xxxxxxxxxx>; Harsh > Jain <harshj@xxxxxxxxxx>; Michal Simek <michals@xxxxxxxxxx>; Kalyani Akula > <kalyania@xxxxxxxxxx>; Kalyani Akula <kalyania@xxxxxxxxxx> > Subject: [PATCH V6 0/4] Add Xilinx's ZynqMP AES-GCM driver support > > This patch set adds support for > - dt-binding docs for Xilinx ZynqMP AES driver > - Adds device tree node for ZynqMP AES driver > - Adds communication layer support for aes in zynqmp.c > - Adds Xilinx ZynqMP driver for AES Algorithm > > NOTE: This patchset is based on Michal's branch > https://git.kernel.org/pub/scm/linux/kernel/git/soc/soc.git/log/?h=arm/driv > ers > because of possible merge conflict for 1/4 patch with below commit commit > 461011b1e1ab ("drivers: firmware: xilinx: Add support for feature check") > > V6 Changes: > - Updated SPDX-License-Identifier in xlnx,zynqmp-aes.yaml. > > V5 Changes : > - Moved arm64: zynqmp: Add Xilinx AES node from 2/4 to 4/4. > - Moved crypto: Add Xilinx AES driver patch from 4/4 to 3/4. > - Moved dt-bindings patch from 1/4 to 2/4 > - Moved firmware: xilinx: Add ZynqMP aes API for AES patch from 3/4 to 1/4 > - Converted dt-bindings from .txt to .yaml format. > - Corrected typo in the subject. > - Updated zynqmp-aes node to correct location. > - Replaced ARCH_ZYNQMP with ZYNQMP_FIRMWARE in Kconfig > - Removed extra new lines and added wherever necessary. > - Updated Signed-off-by sequence. > - Ran checkpatch for all patches in the series. > > V4 Changes : > - Addressed review comments. > > V3 Changes : > - Added software fallback in cases where Hardware doesn't have > the capability to handle the request. > - Removed use of global variable for storing the driver data. > - Enabled CONFIG_CRYPTO_MANAGER_EXTRA_TESTS=y and executed all > the kernel selftests. Also covered tests with tcrypt module. > > V2 Changes : > - Converted RFC PATCH to PATCH > - Removed ALG_SET_KEY_TYPE that was added to support keytype > attribute. Taken using setkey interface. > - Removed deprecated BLKCIPHER in Kconfig > - Erased Key/IV from the buffer. > - Renamed zynqmp-aes driver to zynqmp-aes-gcm. > - Addressed few other review comments > > > Kalyani Akula (4): > firmware: xilinx: Add ZynqMP aes API for AES functionality > dt-bindings: crypto: Add bindings for ZynqMP AES-GCM driver > crypto: Add Xilinx AES driver > arm64: zynqmp: Add Xilinx AES node. > > .../bindings/crypto/xlnx,zynqmp-aes.yaml | 37 ++ > arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 4 + > drivers/crypto/Kconfig | 12 + > drivers/crypto/Makefile | 1 + > drivers/crypto/xilinx/Makefile | 2 + > drivers/crypto/xilinx/zynqmp-aes-gcm.c | 466 > +++++++++++++++++++++ > drivers/firmware/xilinx/zynqmp.c | 25 ++ > include/linux/firmware/xlnx-zynqmp.h | 2 + > 8 files changed, 549 insertions(+) > create mode 100644 > Documentation/devicetree/bindings/crypto/xlnx,zynqmp-aes.yaml > create mode 100644 drivers/crypto/xilinx/Makefile create mode 100644 > drivers/crypto/xilinx/zynqmp-aes-gcm.c > > -- > 1.9.5
