Below changes enable cryto module on Amlogic GXBB SoC. I was realy happy to get this feature working on Odroid C2 SBC. I will try on other SBC in the future. Tested with loading tcrypt module. # sudo modprobe tcrypt sec=1 mode=200 [sudo] password for alarm: [ 903.867059] tcrypt: [ 903.867059] testing speed of async ecb(aes) (ecb(aes-arm64)) encryption [ 903.870265] tcrypt: test 0 (128 bit key, 16 byte blocks): 1922107 operations in 1 seconds (30753712 bytes) [ 904.872802] tcrypt: test 1 (128 bit key, 64 byte blocks): 679032 operations in 1 seconds (43458048 bytes) [ 905.872717] tcrypt: test 2 (128 bit key, 256 byte blocks): 190190 operations in 1 seconds (48688640 bytes) [ 906.872793] tcrypt: test 3 (128 bit key, 1024 byte blocks): 49014 operations in 1 seconds (50190336 bytes) [ 907.872808] tcrypt: test 4 (128 bit key, 1472 byte blocks): 34342 operations in 1 seconds (50551424 bytes) [ 908.876828] tcrypt: test 5 (128 bit key, 8192 byte blocks): 6199 operations in 1 seconds (50782208 bytes) -Anand Anand Moon (3): arm64: dts: amlogic: adds crypto hardware node for GXBB SoCs dt-bindings: crypto: Add compatible string for amlogic GXBB SoC crypto: amlogic: Add new compatible string for amlogic GXBB SoC .../devicetree/bindings/crypto/amlogic,gxl-crypto.yaml | 1 + arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 10 ++++++++++ drivers/crypto/amlogic/amlogic-gxl-core.c | 1 + 3 files changed, 12 insertions(+) -- 2.24.0
