Re: [PATCH v7 3/3] crypto: hisilicon - register zip engine to uacce

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi, Jonathan

On 2019/11/1 上午1:53, Jonathan Cameron wrote:
On Tue, 29 Oct 2019 14:40:16 +0800
Zhangfei Gao <zhangfei.gao@xxxxxxxxxx> wrote:

Register qm to uacce framework for user crypto driver

Signed-off-by: Zhangfei Gao <zhangfei.gao@xxxxxxxxxx>
Signed-off-by: Zhou Wang <wangzhou1@xxxxxxxxxxxxx>
Hi.

This shows there is probably a race during setup that you should close.
Userspace interface is exposed before the driver is ready to handle it.

Few other bits inline.

Thanks,

Jonathan

---
  drivers/crypto/hisilicon/qm.c           | 253 ++++++++++++++++++++++++++++++--
  drivers/crypto/hisilicon/qm.h           |  13 +-
  drivers/crypto/hisilicon/zip/zip_main.c |  39 ++---
  include/uapi/misc/uacce/qm.h            |  23 +++
  4 files changed, 292 insertions(+), 36 deletions(-)
  create mode 100644 include/uapi/misc/uacce/qm.h

diff --git a/drivers/crypto/hisilicon/qm.c b/drivers/crypto/hisilicon/qm.c
index a8ed6990..4b9cced 100644
--- a/drivers/crypto/hisilicon/qm.c
+++ b/drivers/crypto/hisilicon/qm.c
@@ -9,6 +9,9 @@
  #include <linux/log2.h>
  #include <linux/seq_file.h>
  #include <linux/slab.h>
+#include <linux/uacce.h>
+#include <linux/uaccess.h>
+#include <uapi/misc/uacce/qm.h>
  #include "qm.h"
/* eq/aeq irq enable */
@@ -465,17 +468,22 @@ static void qm_cq_head_update(struct hisi_qp *qp)
static void qm_poll_qp(struct hisi_qp *qp, struct hisi_qm *qm)
  {
-	struct qm_cqe *cqe = qp->cqe + qp->qp_status.cq_head;
-
-	if (qp->req_cb) {
-		while (QM_CQE_PHASE(cqe) == qp->qp_status.cqc_phase) {
-			dma_rmb();
-			qp->req_cb(qp, qp->sqe + qm->sqe_size * cqe->sq_head);
-			qm_cq_head_update(qp);
-			cqe = qp->cqe + qp->qp_status.cq_head;
-			qm_db(qm, qp->qp_id, QM_DOORBELL_CMD_CQ,
-			      qp->qp_status.cq_head, 0);
-			atomic_dec(&qp->qp_status.used);
+	struct qm_cqe *cqe;
+
+	if (qp->event_cb) {
+		qp->event_cb(qp);
+	} else {
+		cqe = qp->cqe + qp->qp_status.cq_head;
+
+		if (qp->req_cb) {
+			while (QM_CQE_PHASE(cqe) == qp->qp_status.cqc_phase) {
+				dma_rmb();
+				qp->req_cb(qp, qp->sqe + qm->sqe_size *
+					   cqe->sq_head);
+				qm_cq_head_update(qp);
+				cqe = qp->cqe + qp->qp_status.cq_head;
+				atomic_dec(&qp->qp_status.used);
+			}
  		}
/* set c_flag */
@@ -1397,6 +1405,220 @@ static void hisi_qm_cache_wb(struct hisi_qm *qm)
  	}
  }
+static void qm_qp_event_notifier(struct hisi_qp *qp)
+{
+	wake_up_interruptible(&qp->uacce_q->wait);
+}
+
+static int hisi_qm_get_available_instances(struct uacce_device *uacce)
+{
+	int i, ret;
+	struct hisi_qm *qm = uacce->priv;
+
+	read_lock(&qm->qps_lock);
+	for (i = 0, ret = 0; i < qm->qp_num; i++)
+		if (!qm->qp_array[i])
+			ret++;
+	read_unlock(&qm->qps_lock);
+
+	return ret;
+}
+
+static int hisi_qm_uacce_get_queue(struct uacce_device *uacce,
+				   unsigned long arg,
+				   struct uacce_queue *q)
+{
+	struct hisi_qm *qm = uacce->priv;
+	struct hisi_qp *qp;
+	u8 alg_type = 0;
+
+	qp = hisi_qm_create_qp(qm, alg_type);
+	if (IS_ERR(qp))
+		return PTR_ERR(qp);
+
+	q->priv = qp;
+	q->uacce = uacce;
+	qp->uacce_q = q;
+	qp->event_cb = qm_qp_event_notifier;
+	qp->pasid = arg;
+
+	return 0;
+}
+
+static void hisi_qm_uacce_put_queue(struct uacce_queue *q)
+{
+	struct hisi_qp *qp = q->priv;
+
+	/*
+	 * As put_queue is only called in uacce_mode=1, and only one queue can
We got rid of the modes I think so comment needs an update.
Yes

+	 * be used in this mode. we flush all sqc cache back in put queue.
+	 */
+	hisi_qm_cache_wb(qp->qm);
+
+	/* need to stop hardware, but can not support in v1 */
+	hisi_qm_release_qp(qp);
Should we just drop support for the v1 hardware if we can't do this?

+}
+
+/* map sq/cq/doorbell to user space */
+static int hisi_qm_uacce_mmap(struct uacce_queue *q,
+			      struct vm_area_struct *vma,
+			      struct uacce_qfile_region *qfr)
+{
+	struct hisi_qp *qp = q->priv;
+	struct hisi_qm *qm = qp->qm;
+	size_t sz = vma->vm_end - vma->vm_start;
+	struct pci_dev *pdev = qm->pdev;
+	struct device *dev = &pdev->dev;
+	unsigned long vm_pgoff;
+	int ret;
+
+	switch (qfr->type) {
+	case UACCE_QFRT_MMIO:
+		if (qm->ver == QM_HW_V2) {
+			if (sz > PAGE_SIZE * (QM_DOORBELL_PAGE_NR +
+			    QM_DOORBELL_SQ_CQ_BASE_V2 / PAGE_SIZE))
+				return -EINVAL;
+		} else {
+			if (sz > PAGE_SIZE * QM_DOORBELL_PAGE_NR)
+				return -EINVAL;
+		}
+
+		vma->vm_flags |= VM_IO;
+
+		return remap_pfn_range(vma, vma->vm_start,
+				       qm->phys_base >> PAGE_SHIFT,
+				       sz, pgprot_noncached(vma->vm_page_prot));
+	case UACCE_QFRT_DUS:
+		if (sz != qp->qdma.size)
+			return -EINVAL;
+
Comment style in here is inconsistent. Match the existing code.
OK
+		/* dma_mmap_coherent() requires vm_pgoff as 0
+		 * restore vm_pfoff to initial value for mmap()
+		 */
+		vm_pgoff = vma->vm_pgoff;
+		vma->vm_pgoff = 0;
+		ret = dma_mmap_coherent(dev, vma, qp->qdma.va,
+					qp->qdma.dma, sz);
+		vma->vm_pgoff = vm_pgoff;
+		return ret;
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static int hisi_qm_uacce_start_queue(struct uacce_queue *q)
+{
+	struct hisi_qp *qp = q->priv;
+
+	return hisi_qm_start_qp(qp, qp->pasid);
+}
+
+static void hisi_qm_uacce_stop_queue(struct uacce_queue *q)
+{
+	struct hisi_qp *qp = q->priv;
+
+	hisi_qm_stop_qp(qp);
I'm a great fan of minimalism on these
	hisi_qm_stop_qp(q->priv); doesn't really loose any clarity.
OK
+}
+
+static int qm_set_sqctype(struct uacce_queue *q, u16 type)
+{
+	struct hisi_qm *qm = q->uacce->priv;
+	struct hisi_qp *qp = q->priv;
+
+	write_lock(&qm->qps_lock);
+	qp->alg_type = type;
+	write_unlock(&qm->qps_lock);
+
+	return 0;
+}
+
+static long hisi_qm_uacce_ioctl(struct uacce_queue *q, unsigned int cmd,
+				unsigned long arg)
+{
+	struct hisi_qp *qp = q->priv;
+	struct hisi_qp_ctx qp_ctx;
+
+	if (cmd == UACCE_CMD_QM_SET_QP_CTX) {
+		if (copy_from_user(&qp_ctx, (void __user *)arg,
+				   sizeof(struct hisi_qp_ctx)))
+			return -EFAULT;
+
+		if (qp_ctx.qc_type != 0 && qp_ctx.qc_type != 1)
+			return -EINVAL;
+
+		qm_set_sqctype(q, qp_ctx.qc_type);
+		qp_ctx.id = qp->qp_id;
+
+		if (copy_to_user((void __user *)arg, &qp_ctx,
+				 sizeof(struct hisi_qp_ctx)))
+			return -EFAULT;
+	} else {
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct uacce_ops uacce_qm_ops = {
+	.get_available_instances = hisi_qm_get_available_instances,
+	.get_queue = hisi_qm_uacce_get_queue,
+	.put_queue = hisi_qm_uacce_put_queue,
+	.start_queue = hisi_qm_uacce_start_queue,
+	.stop_queue = hisi_qm_uacce_stop_queue,
+	.mmap = hisi_qm_uacce_mmap,
+	.ioctl = hisi_qm_uacce_ioctl,
+};
+
+static int qm_register_uacce(struct hisi_qm *qm)
+{
+	struct pci_dev *pdev = qm->pdev;
+	struct uacce_device *uacce;
+	unsigned long mmio_page_nr;
+	unsigned long dus_page_nr;
+	struct uacce_interface interface = {
+		.flags = UACCE_DEV_SVA,
+		.ops = &uacce_qm_ops,
+	};
+
+	strncpy(interface.name, pdev->driver->name, sizeof(interface.name));
+
+	uacce = uacce_register(&pdev->dev, &interface);
+	if (IS_ERR(uacce))
+		return PTR_ERR(uacce);
Is there a potential race here as we have exposed the character device before
the driver is ready for it to be used?  Probably need to split the code that
allocates a uacce interface from the bit that actually exposes it to userspace.
I don't think it is a race condition.
Since no requirement of get sysfs ready then register character device.
Also sysfs does not always refect constant members, like available_instance.
Currently we set the sysfs members after uacce_register, which alloc uacce device.
So no problem if they are ready before character device open.

If we split the code, allocate an uacce interface first then expose to usersapce, an additional api maybe required.


+
+	if (uacce->flags & UACCE_DEV_SVA) {
+		qm->use_sva = true;
+	} else {
+		/* only consider sva case */
+		uacce_unregister(uacce);
+		return -EINVAL;
+	}
+
+	uacce->is_vf = pdev->is_virtfn;
+	uacce->priv = qm;
+	uacce->algs = qm->algs;
+
+	if (qm->ver == QM_HW_V1) {
+		mmio_page_nr = QM_DOORBELL_PAGE_NR;
+		uacce->api_ver = HISI_QM_API_VER_BASE;
+	} else {
+		mmio_page_nr = QM_DOORBELL_PAGE_NR +
+			QM_DOORBELL_SQ_CQ_BASE_V2 / PAGE_SIZE;
+		uacce->api_ver = HISI_QM_API_VER2_BASE;
+	}
+
+	dus_page_nr = (PAGE_SIZE - 1 + qm->sqe_size * QM_Q_DEPTH +
+		       sizeof(struct qm_cqe) * QM_Q_DEPTH) >> PAGE_SHIFT;
+
+	uacce->qf_pg_size[UACCE_QFRT_MMIO] = mmio_page_nr;
+	uacce->qf_pg_size[UACCE_QFRT_DUS]  = dus_page_nr;
+
+	qm->uacce = uacce;
+
+	return 0;
+}
+
  /**
   * hisi_qm_init() - Initialize configures about qm.
   * @qm: The qm needing init.
@@ -1421,6 +1643,10 @@ int hisi_qm_init(struct hisi_qm *qm)
  		return -EINVAL;
  	}
+ ret = qm_register_uacce(qm);
+	if (ret < 0)
+		dev_warn(&pdev->dev, "fail to register uacce (%d)\n", ret);
+
looks like there are error paths in qm_init in which we should call
the uacce_unregister?
OK

  	ret = pci_enable_device_mem(pdev);
  	if (ret < 0) {
  		dev_err(&pdev->dev, "Failed to enable device mem!\n");
@@ -1433,6 +1659,8 @@ int hisi_qm_init(struct hisi_qm *qm)
  		goto err_disable_pcidev;
  	}
+ qm->phys_base = pci_resource_start(pdev, PCI_BAR_2);
+	qm->size = pci_resource_len(qm->pdev, PCI_BAR_2);
  	qm->io_base = ioremap(pci_resource_start(pdev, PCI_BAR_2),
  			      pci_resource_len(qm->pdev, PCI_BAR_2));
Use qm->phys_base/size in the ioremap here to avoid repeating the code.
OK

  	if (!qm->io_base) {
@@ -1504,6 +1732,9 @@ void hisi_qm_uninit(struct hisi_qm *qm)
  	iounmap(qm->io_base);
  	pci_release_mem_regions(pdev);
  	pci_disable_device(pdev);
+
+	if (qm->uacce)
+		uacce_unregister(qm->uacce);
Can we make uacce_unregister check the input?
Might make for cleaner users.
OK,

  }
  EXPORT_SYMBOL_GPL(hisi_qm_uninit);
diff --git a/drivers/crypto/hisilicon/qm.h b/drivers/crypto/hisilicon/qm.h
index 103e2fd..84a3be9 100644
--- a/drivers/crypto/hisilicon/qm.h
+++ b/drivers/crypto/hisilicon/qm.h
@@ -77,6 +77,10 @@
#define HISI_ACC_SGL_SGE_NR_MAX 255 +/* page number for queue file region */
+#define QM_DOORBELL_PAGE_NR		1
+
1 blank line only is almost always enough.

+
  enum qp_state {
  	QP_STOP,
  };
@@ -161,7 +165,12 @@ struct hisi_qm {
  	u32 error_mask;
  	u32 msi_mask;
+ const char *algs;
  	bool use_dma_api;
+	bool use_sva;
+	resource_size_t phys_base;
+	resource_size_t size;
+	struct uacce_device *uacce;
  };
struct hisi_qp_status {
@@ -191,10 +200,12 @@ struct hisi_qp {
  	struct hisi_qp_ops *hw_ops;
  	void *qp_ctx;
  	void (*req_cb)(struct hisi_qp *qp, void *data);
+	void (*event_cb)(struct hisi_qp *qp);
  	struct work_struct work;
  	struct workqueue_struct *wq;
-
unrelated change.

  	struct hisi_qm *qm;
+	u16 pasid;
+	struct uacce_queue *uacce_q;
  };
int hisi_qm_init(struct hisi_qm *qm);
diff --git a/drivers/crypto/hisilicon/zip/zip_main.c b/drivers/crypto/hisilicon/zip/zip_main.c
index 1b2ee96..48860d2 100644
--- a/drivers/crypto/hisilicon/zip/zip_main.c
+++ b/drivers/crypto/hisilicon/zip/zip_main.c
@@ -316,8 +316,14 @@ static void hisi_zip_set_user_domain_and_cache(struct hisi_zip *hisi_zip)
  	writel(AXUSER_BASE, base + HZIP_BD_RUSER_32_63);
  	writel(AXUSER_BASE, base + HZIP_SGL_RUSER_32_63);
  	writel(AXUSER_BASE, base + HZIP_BD_WUSER_32_63);
-	writel(AXUSER_BASE, base + HZIP_DATA_RUSER_32_63);
-	writel(AXUSER_BASE, base + HZIP_DATA_WUSER_32_63);
+
+	if (hisi_zip->qm.use_sva) {
+		writel(AXUSER_BASE | AXUSER_SSV, base + HZIP_DATA_RUSER_32_63);
+		writel(AXUSER_BASE | AXUSER_SSV, base + HZIP_DATA_WUSER_32_63);
+	} else {
+		writel(AXUSER_BASE, base + HZIP_DATA_RUSER_32_63);
+		writel(AXUSER_BASE, base + HZIP_DATA_WUSER_32_63);
+	}
/* let's open all compression/decompression cores */
  	writel(DECOMP_CHECK_ENABLE | ALL_COMP_DECOMP_EN,
@@ -671,24 +677,12 @@ static int hisi_zip_probe(struct pci_dev *pdev, const struct pci_device_id *id)
  	qm = &hisi_zip->qm;
  	qm->pdev = pdev;
  	qm->ver = rev_id;
-
Try to avoid noise from white space changes.  No huge help to delete the blank line here.

+	qm->use_dma_api = true;
+	qm->algs = "zlib\ngzip\n";
  	qm->sqe_size = HZIP_SQE_SIZE;
  	qm->dev_name = hisi_zip_name;
  	qm->fun_type = (pdev->device == PCI_DEVICE_ID_ZIP_PF) ? QM_HW_PF :
  								QM_HW_VF;
Unrelated changes I think.  Can we clean out the old left overs
of uacce from the driver in a precursor patch? Also if it's no longer
used can we drop the module param?
This patch is an example, so just in one patch to make it work.

-	switch (uacce_mode) {
-	case 0:
-		qm->use_dma_api = true;
-		break;
-	case 1:
-		qm->use_dma_api = false;
-		break;
-	case 2:
-		qm->use_dma_api = true;
-		break;
-	default:
-		return -EINVAL;
-	}
ret = hisi_qm_init(qm);
  	if (ret) {
@@ -976,12 +970,10 @@ static int __init hisi_zip_init(void)
  		goto err_pci;
  	}
- if (uacce_mode == 0 || uacce_mode == 2) {
-		ret = hisi_zip_register_to_crypto();
-		if (ret < 0) {
-			pr_err("Failed to register driver to crypto.\n");
-			goto err_crypto;
-		}
+	ret = hisi_zip_register_to_crypto();
+	if (ret < 0) {
+		pr_err("Failed to register driver to crypto.\n");
+		goto err_crypto;
  	}
return 0;
@@ -996,8 +988,7 @@ static int __init hisi_zip_init(void)
static void __exit hisi_zip_exit(void)
  {
-	if (uacce_mode == 0 || uacce_mode == 2)
-		hisi_zip_unregister_from_crypto();
+	hisi_zip_unregister_from_crypto();


  	pci_unregister_driver(&hisi_zip_pci_driver);
  	hisi_zip_unregister_debugfs();
  }
diff --git a/include/uapi/misc/uacce/qm.h b/include/uapi/misc/uacce/qm.h
new file mode 100644
index 0000000..d79a8f2
--- /dev/null
+++ b/include/uapi/misc/uacce/qm.h
Given generic directory (assuming uacce becomes heavily used) probably
want to prefix that if it is unique to hisilicon.

hisi_qm.h?
OK, good idea.

@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
+#ifndef HISI_QM_USR_IF_H
+#define HISI_QM_USR_IF_H
+
+#include <linux/types.h>
+
+/**
+ * struct hisi_qp_ctx - User data for hisi qp.
+ * @id: Specifies which Turbo decode algorithm to use
What's a Turbo algorithm?  I don't know and I have the manuals ;)
Sorry, will change that

Thanks




[Index of Archives]     [Kernel]     [Gnu Classpath]     [Gnu Crypto]     [DM Crypt]     [Netfilter]     [Bugtraq]

  Powered by Linux