On 7/25/2019 4:58 PM, Iuliana Prodan wrote: > @@ -892,24 +895,26 @@ void cnstr_shdsc_rfc4106_encap(u32 * const desc, struct alginfo *cdata, > append_math_sub_imm_u32(desc, VARSEQINLEN, REG3, IMM, ivsize); > append_math_add(desc, VARSEQOUTLEN, ZERO, REG3, CAAM_CMD_SZ); > > - /* Read assoc data */ > - append_seq_fifo_load(desc, 0, FIFOLD_CLASS_CLASS1 | FIFOLDST_VLF | > - FIFOLD_TYPE_AAD | FIFOLD_TYPE_FLUSH1); > + /* Skip AAD */ > + append_seq_fifo_store(desc, 0, FIFOST_TYPE_SKIP | FIFOLDST_VLF); > > - /* Skip IV */ > - append_seq_fifo_load(desc, ivsize, FIFOLD_CLASS_SKIP); > + /* Read cryptlen and set this value into VARSEQOUTLEN */ > + append_math_sub(desc, VARSEQOUTLEN, SEQINLEN, REG3, CAAM_CMD_SZ); > > - /* Will read cryptlen bytes */ > - append_math_sub(desc, VARSEQINLEN, SEQINLEN, REG0, CAAM_CMD_SZ); > + /* If cryptlen is ZERO jump to AAD command */ > + zero_cryptlen_jump_cmd = append_jump(desc, JUMP_TEST_ALL | > + JUMP_COND_MATH_Z); > > /* Workaround for erratum A-005473 (simultaneous SEQ FIFO skips) */ > - append_seq_fifo_load(desc, 0, FIFOLD_CLASS_CLASS1 | FIFOLD_TYPE_MSG); > + append_seq_fifo_store(desc, 0, FIFOST_TYPE_MESSAGE_DATA); > The workaround should be moved further down, just before the "Skip IV". By moving this instruction as far away as possible from previous seq fifo store, the chances of DECO stalling are reduced. > - /* Skip assoc data */ > - append_seq_fifo_store(desc, 0, FIFOST_TYPE_SKIP | FIFOLDST_VLF); > + /* Read AAD data */ > + append_seq_fifo_load(desc, 0, FIFOLD_CLASS_CLASS1 | FIFOLDST_VLF | > + FIFOLD_TYPE_AAD | FIFOLD_TYPE_FLUSH1); > > - /* cryptlen = seqoutlen - assoclen */ > - append_math_sub(desc, VARSEQOUTLEN, VARSEQINLEN, REG0, CAAM_CMD_SZ); > + /* Skip IV */ > + append_seq_fifo_load(desc, ivsize, FIFOLD_CLASS_SKIP); > + append_math_add(desc, VARSEQINLEN, VARSEQOUTLEN, REG0, CAAM_CMD_SZ); > > /* Write encrypted data */ > append_seq_fifo_store(desc, 0, FIFOST_TYPE_MESSAGE_DATA | FIFOLDST_VLF); > @@ -918,6 +923,18 @@ void cnstr_shdsc_rfc4106_encap(u32 * const desc, struct alginfo *cdata, > append_seq_fifo_load(desc, 0, FIFOLD_CLASS_CLASS1 | FIFOLDST_VLF | > FIFOLD_TYPE_MSG | FIFOLD_TYPE_LAST1); > > + /* Jump instructions to avoid double reading of AAD */ > + skip_instructions = append_jump(desc, JUMP_TEST_ALL); > + > + /* There is no input data, cryptlen = 0 */ > + set_jump_tgt_here(desc, zero_cryptlen_jump_cmd); > + > + /* Read AAD */ > + append_seq_fifo_load(desc, 0, FIFOLD_CLASS_CLASS1 | FIFOLDST_VLF | > + FIFOLD_TYPE_AAD | FIFOLD_TYPE_LAST1); > + > + set_jump_tgt_here(desc, skip_instructions); > + > /* Write ICV */ > append_seq_store(desc, icvsize, LDST_CLASS_1_CCB | > LDST_SRCDST_BYTE_CONTEXT);