On Thu, 10 Jan 2019 at 19:49, Daniel Thompson
<daniel.thompson@xxxxxxxxxx> wrote:
>
> On Thu, Jan 10, 2019 at 05:54:55PM +0530, Sumit Garg wrote:
> > OP-TEE provides a pseudo TA to enumerate TAs which can act as devices/
> > services for TEE bus. So implement device enumeration using invoke
> > function: PTA_CMD_GET_DEVICES provided by pseudo TA to fetch array of
> > device UUIDs. Also register these enumerated devices with TEE bus as
> > "optee-clntX" device.
> >
> > Signed-off-by: Sumit Garg <sumit.garg@xxxxxxxxxx>
> > ---
> > drivers/tee/optee/Makefile | 1 +
> > drivers/tee/optee/core.c | 4 +
> > drivers/tee/optee/device.c | 150 ++++++++++++++++++++++++++++++++++++++
> > drivers/tee/optee/optee_private.h | 3 +
> > 4 files changed, 158 insertions(+)
> > create mode 100644 drivers/tee/optee/device.c
> >
> > diff --git a/drivers/tee/optee/Makefile b/drivers/tee/optee/Makefile
> > index 48d262a..56263ae 100644
> > --- a/drivers/tee/optee/Makefile
> > +++ b/drivers/tee/optee/Makefile
> > @@ -5,3 +5,4 @@ optee-objs += call.o
> > optee-objs += rpc.o
> > optee-objs += supp.o
> > optee-objs += shm_pool.o
> > +optee-objs += device.o
> > diff --git a/drivers/tee/optee/core.c b/drivers/tee/optee/core.c
> > index e5efce3..ac59c77 100644
> > --- a/drivers/tee/optee/core.c
> > +++ b/drivers/tee/optee/core.c
> > @@ -634,6 +634,10 @@ static struct optee *optee_probe(struct device_node *np)
> > if (optee->sec_caps & OPTEE_SMC_SEC_CAP_DYNAMIC_SHM)
> > pr_info("dynamic shared memory is enabled\n");
> >
> > + rc = optee_enumerate_devices();
> > + if (rc)
> > + goto err;
> > +
> > pr_info("initialized driver\n");
> > return optee;
> > err:
> > diff --git a/drivers/tee/optee/device.c b/drivers/tee/optee/device.c
> > new file mode 100644
> > index 0000000..b38d24b
> > --- /dev/null
> > +++ b/drivers/tee/optee/device.c
> > @@ -0,0 +1,150 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Copyright (C) 2019 Linaro Ltd.
> > + */
> > +
> > +#include <linux/kernel.h>
> > +#include <linux/slab.h>
> > +#include <linux/tee_drv.h>
> > +#include <linux/uuid.h>
> > +#include "optee_private.h"
> > +
> > +/*
> > + * Get device UUIDs
> > + *
> > + * [out] memref[0] Array of device UUIDs
> > + *
> > + * Return codes:
> > + * TEE_SUCCESS - Invoke command success
> > + * TEE_ERROR_BAD_PARAMETERS - Incorrect input param
> > + * TEE_ERROR_SHORT_BUFFER - Output buffer size less than required
> > + */
> > +#define PTA_CMD_GET_DEVICES 0x0
> > +
> > +static int optee_ctx_match(struct tee_ioctl_version_data *ver, const void *data)
> > +{
> > + if (ver->impl_id == TEE_IMPL_ID_OPTEE)
> > + return 1;
> > + else
> > + return 0;
> > +}
> > +
> > +static int get_devices(struct tee_context *ctx, u32 session,
> > + struct tee_shm *device_uuid, u32 *shm_size)
>
> Missing const on device_uuid?
>
I don't think we should have a const for device_uuid here as this is
shared memory struct pointer which is dynamically allocated and used
to fetch device UUIDs.
>
> > +{
> > + u32 ret = 0;
> > + struct tee_ioctl_invoke_arg inv_arg = {0};
> > + struct tee_param param[4] = {0};
> > +
> > + /* Invoke PTA_CMD_GET_DEVICES function */
> > + inv_arg.func = PTA_CMD_GET_DEVICES;
> > + inv_arg.session = session;
> > + inv_arg.num_params = 4;
> > +
> > + /* Fill invoke cmd params */
> > + param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT;
> > + param[0].u.memref.shm = device_uuid;
> > + param[0].u.memref.size = *shm_size;
> > + param[0].u.memref.shm_offs = 0;
> > +
> > + ret = tee_client_invoke_func(ctx, &inv_arg, param);
> > + if ((ret < 0) || ((inv_arg.ret != TEEC_SUCCESS) &&
> > + (inv_arg.ret != TEEC_ERROR_SHORT_BUFFER))) {
> > + pr_err("PTA_CMD_GET_DEVICES invoke function err: %x\n",
> > + inv_arg.ret);
> > + return -EINVAL;
> > + }
> > +
> > + *shm_size = param[0].u.memref.size;
> > +
> > + return 0;
> > +}
> > +
> > +static int optee_register_device(uuid_t *device_uuid, u32 device_id)
>
> const?
>
Will add const here.
>
> > +{
> > + struct tee_client_device *optee_device = NULL;
> > + int rc;
> > +
> > + optee_device = kzalloc(sizeof(*optee_device), GFP_KERNEL);
> > + if (!optee_device)
> > + return -ENOMEM;
> > +
> > + optee_device->dev.bus = &tee_bus_type;
> > + dev_set_name(&optee_device->dev, "optee-clnt%u", device_id);
> > + uuid_copy(&optee_device->id.uuid, device_uuid);
> > +
> > + rc = device_register(&optee_device->dev);
> > + if (rc)
> > + pr_err("device registration failed, err: %d\n", rc);
>
> Leak optee_device?
>
Will fix.
>
> > +
> > + return rc;
> > +}
> > +
> > +int optee_enumerate_devices(void)
> > +{
> > + uuid_t pta_uuid =
> > + UUID_INIT(0x7011a688, 0xddde, 0x4053,
> > + 0xa5, 0xa9, 0x7b, 0x3c, 0x4d, 0xdf, 0x13, 0xb8);
>
> I think this could/should be const too.
>
Agree, will add const here too.
>
> > + struct tee_ioctl_open_session_arg sess_arg = {0};
> > + struct tee_shm *device_shm = NULL;
> > + uuid_t *device_uuid = NULL;
> > + struct tee_context *ctx = NULL;
> > + u32 shm_size = 0, idx = 0;
> > + int rc;
> > +
> > + /* Open context with OP-TEE driver */
> > + ctx = tee_client_open_context(NULL, optee_ctx_match, NULL, NULL);
> > + if (IS_ERR(ctx))
> > + return -ENODEV;
> > +
> > + /* Open session with device enumeration pseudo TA */
> > + memcpy(sess_arg.uuid, pta_uuid.b, TEE_IOCTL_UUID_LEN);
> > + sess_arg.clnt_login = TEE_IOCTL_LOGIN_PUBLIC;
> > + sess_arg.num_params = 0;
> > +
> > + rc = tee_client_open_session(ctx, &sess_arg, NULL);
> > + if ((rc < 0) || (sess_arg.ret != TEEC_SUCCESS)) {
> > + /* Device enumeration pseudo TA not found */
> > + rc = 0;
> > + goto out_ctx;
> > + }
> > +
> > + rc = get_devices(ctx, sess_arg.session, device_shm, &shm_size);
>
> Use NULL and 0 directly here instead of relying on initialized values.
> This makes it clear we are fetching the size of a buffer and are doing
> something different to the next call to get_devices().
>
Ok, will directly pass NULL here.
>
> > + if (rc < 0)
> > + goto out_sess;
> > +
> > + device_shm = tee_shm_alloc(ctx, shm_size,
> > + TEE_SHM_MAPPED | TEE_SHM_DMA_BUF);
> > + if (IS_ERR(device_shm)) {
> > + pr_err("tee_shm_alloc failed\n");
> > + rc = PTR_ERR(device_shm);
> > + goto out_sess;
> > + }
> > +
> > + rc = get_devices(ctx, sess_arg.session, device_shm, &shm_size);
> > + if (rc < 0)
> > + goto out_shm;
> > +
> > + device_uuid = tee_shm_get_va(device_shm, 0);
> > + if (IS_ERR(device_uuid)) {
> > + pr_err("tee_shm_get_va failed\n");
> > + rc = PTR_ERR(device_uuid);
> > + goto out_shm;
> > + }
> > +
> > + while (idx < shm_size / sizeof(uuid_t)) {
>
> This is a very uncommon way to write a for loop ;-).
>
Ok, will add "num_devices" variable.
-Sumit
>
> > + rc = optee_register_device(&device_uuid[idx], idx);
> > + if (rc)
> > + goto out_shm;
> > + idx++;
> > + }
> > +
> > +out_shm:
> > + tee_shm_free(device_shm);
> > +out_sess:
> > + tee_client_close_session(ctx, sess_arg.session);
> > +out_ctx:
> > + tee_client_close_context(ctx);
> > +
> > + return rc;
> > +}
> > diff --git a/drivers/tee/optee/optee_private.h b/drivers/tee/optee/optee_private.h
> > index 35e7938..a5e84af 100644
> > --- a/drivers/tee/optee/optee_private.h
> > +++ b/drivers/tee/optee/optee_private.h
> > @@ -28,6 +28,7 @@
> > #define TEEC_ERROR_BAD_PARAMETERS 0xFFFF0006
> > #define TEEC_ERROR_COMMUNICATION 0xFFFF000E
> > #define TEEC_ERROR_OUT_OF_MEMORY 0xFFFF000C
> > +#define TEEC_ERROR_SHORT_BUFFER 0xFFFF0010
> >
> > #define TEEC_ORIGIN_COMMS 0x00000002
> >
> > @@ -181,6 +182,8 @@ void optee_free_pages_list(void *array, size_t num_entries);
> > void optee_fill_pages_list(u64 *dst, struct page **pages, int num_pages,
> > size_t page_offset);
> >
> > +int optee_enumerate_devices(void);
> > +
> > /*
> > * Small helpers
> > */
> > --
> > 2.7.4
> >
