Re: [RFCv3 PATCH 1/6] uacce: Add documents for WarpDrive/uacce

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Nov 15, 2018 at 04:54:55PM +0200, Leon Romanovsky wrote:
> Date: Thu, 15 Nov 2018 16:54:55 +0200
> From: Leon Romanovsky <leon@xxxxxxxxxx>
> To: Kenneth Lee <liguozhu@xxxxxxxxxxxxx>
> CC: Kenneth Lee <nek.in.cn@xxxxxxxxx>, Tim Sell <timothy.sell@xxxxxxxxxx>,
>  linux-doc@xxxxxxxxxxxxxxx, Alexander Shishkin
>  <alexander.shishkin@xxxxxxxxxxxxxxx>, Zaibo Xu <xuzaibo@xxxxxxxxxx>,
>  zhangfei.gao@xxxxxxxxxxx, linuxarm@xxxxxxxxxx, haojian.zhuang@xxxxxxxxxx,
>  Christoph Lameter <cl@xxxxxxxxx>, Hao Fang <fanghao11@xxxxxxxxxx>, Gavin
>  Schenk <g.schenk@xxxxxxxxxxxx>, RDMA mailing list
>  <linux-rdma@xxxxxxxxxxxxxxx>, Zhou Wang <wangzhou1@xxxxxxxxxxxxx>, Jason
>  Gunthorpe <jgg@xxxxxxxx>, Doug Ledford <dledford@xxxxxxxxxx>, Uwe
>  Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>, David Kershner
>  <david.kershner@xxxxxxxxxx>, Johan Hovold <johan@xxxxxxxxxx>, Cyrille
>  Pitchen <cyrille.pitchen@xxxxxxxxxxxxxxxxxx>, Sagar Dharia
>  <sdharia@xxxxxxxxxxxxxx>, Jens Axboe <axboe@xxxxxxxxx>,
>  guodong.xu@xxxxxxxxxx, linux-netdev <netdev@xxxxxxxxxxxxxxx>, Randy Dunlap
>  <rdunlap@xxxxxxxxxxxxx>, linux-kernel@xxxxxxxxxxxxxxx, Vinod Koul
>  <vkoul@xxxxxxxxxx>, linux-crypto@xxxxxxxxxxxxxxx, Philippe Ombredanne
>  <pombredanne@xxxxxxxx>, Sanyog Kale <sanyog.r.kale@xxxxxxxxx>, "David S.
>  Miller" <davem@xxxxxxxxxxxxx>, linux-accelerators@xxxxxxxxxxxxxxxx
> Subject: Re: [RFCv3 PATCH 1/6] uacce: Add documents for WarpDrive/uacce
> User-Agent: Mutt/1.10.1 (2018-07-13)
> Message-ID: <20181115145455.GN3759@xxxxxxxxxxxxxxxxxx>
> 
> On Thu, Nov 15, 2018 at 04:51:09PM +0800, Kenneth Lee wrote:
> > On Wed, Nov 14, 2018 at 06:00:17PM +0200, Leon Romanovsky wrote:
> > > Date: Wed, 14 Nov 2018 18:00:17 +0200
> > > From: Leon Romanovsky <leon@xxxxxxxxxx>
> > > To: Kenneth Lee <nek.in.cn@xxxxxxxxx>
> > > CC: Tim Sell <timothy.sell@xxxxxxxxxx>, linux-doc@xxxxxxxxxxxxxxx,
> > >  Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>, Zaibo Xu
> > >  <xuzaibo@xxxxxxxxxx>, zhangfei.gao@xxxxxxxxxxx, linuxarm@xxxxxxxxxx,
> > >  haojian.zhuang@xxxxxxxxxx, Christoph Lameter <cl@xxxxxxxxx>, Hao Fang
> > >  <fanghao11@xxxxxxxxxx>, Gavin Schenk <g.schenk@xxxxxxxxxxxx>, RDMA mailing
> > >  list <linux-rdma@xxxxxxxxxxxxxxx>, Zhou Wang <wangzhou1@xxxxxxxxxxxxx>,
> > >  Jason Gunthorpe <jgg@xxxxxxxx>, Doug Ledford <dledford@xxxxxxxxxx>, Uwe
> > >  Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>, David Kershner
> > >  <david.kershner@xxxxxxxxxx>, Johan Hovold <johan@xxxxxxxxxx>, Cyrille
> > >  Pitchen <cyrille.pitchen@xxxxxxxxxxxxxxxxxx>, Sagar Dharia
> > >  <sdharia@xxxxxxxxxxxxxx>, Jens Axboe <axboe@xxxxxxxxx>,
> > >  guodong.xu@xxxxxxxxxx, linux-netdev <netdev@xxxxxxxxxxxxxxx>, Randy Dunlap
> > >  <rdunlap@xxxxxxxxxxxxx>, linux-kernel@xxxxxxxxxxxxxxx, Vinod Koul
> > >  <vkoul@xxxxxxxxxx>, linux-crypto@xxxxxxxxxxxxxxx, Philippe Ombredanne
> > >  <pombredanne@xxxxxxxx>, Sanyog Kale <sanyog.r.kale@xxxxxxxxx>, Kenneth Lee
> > >  <liguozhu@xxxxxxxxxxxxx>, "David S. Miller" <davem@xxxxxxxxxxxxx>,
> > >  linux-accelerators@xxxxxxxxxxxxxxxx
> > > Subject: Re: [RFCv3 PATCH 1/6] uacce: Add documents for WarpDrive/uacce
> > > User-Agent: Mutt/1.10.1 (2018-07-13)
> > > Message-ID: <20181114160017.GI3759@xxxxxxxxxxxxxxxxxx>
> > >
> > > On Wed, Nov 14, 2018 at 10:58:09AM +0800, Kenneth Lee wrote:
> > > >
> > > > 在 2018/11/13 上午8:23, Leon Romanovsky 写道:
> > > > > On Mon, Nov 12, 2018 at 03:58:02PM +0800, Kenneth Lee wrote:
> > > > > > From: Kenneth Lee <liguozhu@xxxxxxxxxxxxx>
> > > > > >
> > > > > > WarpDrive is a general accelerator framework for the user application to
> > > > > > access the hardware without going through the kernel in data path.
> > > > > >
> > > > > > The kernel component to provide kernel facility to driver for expose the
> > > > > > user interface is called uacce. It a short name for
> > > > > > "Unified/User-space-access-intended Accelerator Framework".
> > > > > >
> > > > > > This patch add document to explain how it works.
> > > > > + RDMA and netdev folks
> > > > >
> > > > > Sorry, to be late in the game, I don't see other patches, but from
> > > > > the description below it seems like you are reinventing RDMA verbs
> > > > > model. I have hard time to see the differences in the proposed
> > > > > framework to already implemented in drivers/infiniband/* for the kernel
> > > > > space and for the https://github.com/linux-rdma/rdma-core/ for the user
> > > > > space parts.
> > > >
> > > > Thanks Leon,
> > > >
> > > > Yes, we tried to solve similar problem in RDMA. We also learned a lot from
> > > > the exist code of RDMA. But we we have to make a new one because we cannot
> > > > register accelerators such as AI operation, encryption or compression to the
> > > > RDMA framework:)
> > >
> > > Assuming that you did everything right and still failed to use RDMA
> > > framework, you was supposed to fix it and not to reinvent new exactly
> > > same one. It is how we develop kernel, by reusing existing code.
> >
> > Yes, but we don't force other system such as NIC or GPU into RDMA, do we?
> 
> You don't introduce new NIC or GPU, but proposing another interface to
> directly access HW memory and bypass kernel for the data path. This is
> whole idea of RDMA and this is why it is already present in the kernel.
> 
> Various hardware devices are supported in our stack allow a ton of crazy
> stuff, including GPUs interconnections and NIC functionalities.

Yes. We don't want to invent new wheel. That is why we did it behind VFIO in RFC
v1 and v2. But finally we were persuaded by Mr. Jerome Glisse that VFIO was not
a good place to solve the problem.

And currently, as you see, IB is bound with devices doing RDMA. The register
function, ib_register_device() hint that it is a netdev (get_netdev() callback), it know
about gid, pkey, and Memory Window. IB is not simply a address space management
framework. And verbs to IB are not transparent. If we start to add
compression/decompression, AI (RNN, CNN stuff) operations, and encryption/decryption
to the verbs set. It will become very complexity. Or maybe I misunderstand the
IB idea? But I don't see compression hardware is integrated in the mainline
Kernel. Could you directly point out which one I can used as a reference?

> 
> >
> > I assume you would not agree to register a zip accelerator to infiniband? :)
> 
> "infiniband" name in the "drivers/infiniband/" is legacy one and the
> current code supports IB, RoCE, iWARP and OmniPath as a transport layers.
> For a lone time, we wanted to rename that folder to be "drivers/rdma",
> but didn't find enough brave men/women to do it, due to backport mess
> for such move.
> 
> The addition of zip accelerator to RDMA is possible and depends on how
> you will model such new functionality - new driver, or maybe new ULP.
> 
> >
> > Further, I don't think it is wise to break an exist system (RDMA) to fulfill a
> > totally new scenario. The better choice is to let them run in parallel for some
> > time and try to merge them accordingly.
> 
> Awesome, so please run your code out-of-tree for now and once you are ready
> for submission let's try to merge it.

Yes, yes. We know trust need time to gain. But the fact is that there is no
accelerator user driver can be added to mainline kernel. We should raise the
topic time to time. So to help the communication to fix the gap, right?

We are also opened to cooperate with IB to do it within the IB framework. But
please let me know where to start. I feel it is quite wired to make a
ib_register_device for a zip or RSA accelerator.

> 
> >
> > >
> > > >
> > > > Another problem we tried to address is the way to pin the memory for dma
> > > > operation. The RDMA way to pin the memory cannot avoid the page lost due to
> > > > copy-on-write operation during the memory is used by the device. This may
> > > > not be important to RDMA library. But it is important to accelerator.
> > >
> > > Such support exists in drivers/infiniband/ from late 2014 and
> > > it is called ODP (on demand paging).
> >
> > I reviewed ODP and I think it is a solution bound to infiniband. It is part of
> > MR semantics and required a infiniband specific hook
> > (ucontext->invalidate_range()). And the hook requires the device to be able to
> > stop using the page for a while for the copying. It is ok for infiniband
> > (actually, only mlx5 uses it). I don't think most accelerators can support
> > this mode. But WarpDrive works fully on top of IOMMU interface, it has no this
> > limitation.
> 
> 1. It has nothing to do with infiniband.

But it must be a ib_dev first.

> 2. MR and uncontext are verbs semantics and needed to ensure that host
> memory exposed to user is properly protected from security point of view.
> 3. "stop using the page for a while for the copying" - I'm not fully
> understand this claim, maybe this article will help you to better
> describe : https://lwn.net/Articles/753027/

This topic was being discussed in RFCv2. The key problem here is that:

The device need to hold the memory for its own calculation, but the CPU/software
want to stop it for a while for synchronizing with disk or COW.

If the hardware support SVM/SVA (Shared Virtual Memory/Address), it is easy, the
device share page table with CPU, the device will raise a page fault when the
CPU downgrade the PTE to read-only. 

If the hardware cannot share page table with the CPU, we then need to have
some way to change the device page table. This is what happen in ODP. It
invalidates the page table in device upon mmu_notifier call back. But this cannot
solve the COW problem: if the user process A share a page P with device, and A 
forks a new process B, and it continue to write to the page. By COW, the
process B will keep the page P, while A will get a new page P'. But you have
no way to let the device know it should use P' rather than P.

This may be OK for RDMA application. Because RDMA is a big thing and we can ask
the programmer to avoid the situation. But for a accelerator, I don't think we
can ask a programmer to care for this when use a zlib.

In WarpDrive/uacce, we make this simple. If you support IOMMU and it support
SVM/SVA. Everything will be fine just like ODP implicit mode. And you don't need
to write any code for that. Because it has been done by IOMMU framework. If it
dose not, you have to use the kernel allocated memory which has the same IOVA as
the VA in user space. So we can still maintain a unify address space among the
devices and the applicatin.

> 4. mlx5 supports ODP not because of being partially IB device,
> but because HW performance oriented implementation is not an easy task.
> 
> >
> > >
> > > >
> > > > Hope this can help the understanding.
> > >
> > > Yes, it helped me a lot.
> > > Now, I'm more than before convinced that this whole patchset shouldn't
> > > exist in the first place.
> >
> > Then maybe you can tell me how I can register my accelerator to the user space?
> 
> Write kernel driver and write user space part of it.
> https://github.com/linux-rdma/rdma-core/
> 
> I have no doubts that your colleagues who wrote and maintain
> drivers/infiniband/hw/hns driver know best how to do it.
> They did it very successfully.
> 
> Thanks
> 
> >
> > >
> > > To be clear, NAK.
> > >
> > > Thanks
> > >
> > > >
> > > > Cheers
> > > >
> > > > >
> > > > > Hard NAK from RDMA side.
> > > > >
> > > > > Thanks
> > > > >
> > > > > > Signed-off-by: Kenneth Lee <liguozhu@xxxxxxxxxxxxx>
> > > > > > ---
> > > > > >   Documentation/warpdrive/warpdrive.rst       | 260 +++++++
> > > > > >   Documentation/warpdrive/wd-arch.svg         | 764 ++++++++++++++++++++
> > > > > >   Documentation/warpdrive/wd.svg              | 526 ++++++++++++++
> > > > > >   Documentation/warpdrive/wd_q_addr_space.svg | 359 +++++++++
> > > > > >   4 files changed, 1909 insertions(+)
> > > > > >   create mode 100644 Documentation/warpdrive/warpdrive.rst
> > > > > >   create mode 100644 Documentation/warpdrive/wd-arch.svg
> > > > > >   create mode 100644 Documentation/warpdrive/wd.svg
> > > > > >   create mode 100644 Documentation/warpdrive/wd_q_addr_space.svg
> > > > > >
> > > > > > diff --git a/Documentation/warpdrive/warpdrive.rst b/Documentation/warpdrive/warpdrive.rst
> > > > > > new file mode 100644
> > > > > > index 000000000000..ef84d3a2d462
> > > > > > --- /dev/null
> > > > > > +++ b/Documentation/warpdrive/warpdrive.rst
> > > > > > @@ -0,0 +1,260 @@
> > > > > > +Introduction of WarpDrive
> > > > > > +=========================
> > > > > > +
> > > > > > +*WarpDrive* is a general accelerator framework for the user application to
> > > > > > +access the hardware without going through the kernel in data path.
> > > > > > +
> > > > > > +It can be used as the quick channel for accelerators, network adaptors or
> > > > > > +other hardware for application in user space.
> > > > > > +
> > > > > > +This may make some implementation simpler.  E.g.  you can reuse most of the
> > > > > > +*netdev* driver in kernel and just share some ring buffer to the user space
> > > > > > +driver for *DPDK* [4] or *ODP* [5]. Or you can combine the RSA accelerator with
> > > > > > +the *netdev* in the user space as a https reversed proxy, etc.
> > > > > > +
> > > > > > +*WarpDrive* takes the hardware accelerator as a heterogeneous processor which
> > > > > > +can share particular load from the CPU:
> > > > > > +
> > > > > > +.. image:: wd.svg
> > > > > > +        :alt: WarpDrive Concept
> > > > > > +
> > > > > > +The virtual concept, queue, is used to manage the requests sent to the
> > > > > > +accelerator. The application send requests to the queue by writing to some
> > > > > > +particular address, while the hardware takes the requests directly from the
> > > > > > +address and send feedback accordingly.
> > > > > > +
> > > > > > +The format of the queue may differ from hardware to hardware. But the
> > > > > > +application need not to make any system call for the communication.
> > > > > > +
> > > > > > +*WarpDrive* tries to create a shared virtual address space for all involved
> > > > > > +accelerators. Within this space, the requests sent to queue can refer to any
> > > > > > +virtual address, which will be valid to the application and all involved
> > > > > > +accelerators.
> > > > > > +
> > > > > > +The name *WarpDrive* is simply a cool and general name meaning the framework
> > > > > > +makes the application faster. It includes general user library, kernel
> > > > > > +management module and drivers for the hardware. In kernel, the management
> > > > > > +module is called *uacce*, meaning "Unified/User-space-access-intended
> > > > > > +Accelerator Framework".
> > > > > > +
> > > > > > +
> > > > > > +How does it work
> > > > > > +================
> > > > > > +
> > > > > > +*WarpDrive* uses *mmap* and *IOMMU* to play the trick.
> > > > > > +
> > > > > > +*Uacce* creates a chrdev for the device registered to it. A "queue" will be
> > > > > > +created when the chrdev is opened. The application access the queue by mmap
> > > > > > +different address region of the queue file.
> > > > > > +
> > > > > > +The following figure demonstrated the queue file address space:
> > > > > > +
> > > > > > +.. image:: wd_q_addr_space.svg
> > > > > > +        :alt: WarpDrive Queue Address Space
> > > > > > +
> > > > > > +The first region of the space, device region, is used for the application to
> > > > > > +write request or read answer to or from the hardware.
> > > > > > +
> > > > > > +Normally, there can be three types of device regions mmio and memory regions.
> > > > > > +It is recommended to use common memory for request/answer descriptors and use
> > > > > > +the mmio space for device notification, such as doorbell. But of course, this
> > > > > > +is all up to the interface designer.
> > > > > > +
> > > > > > +There can be two types of device memory regions, kernel-only and user-shared.
> > > > > > +This will be explained in the "kernel APIs" section.
> > > > > > +
> > > > > > +The Static Share Virtual Memory region is necessary only when the device IOMMU
> > > > > > +does not support "Share Virtual Memory". This will be explained after the
> > > > > > +*IOMMU* idea.
> > > > > > +
> > > > > > +
> > > > > > +Architecture
> > > > > > +------------
> > > > > > +
> > > > > > +The full *WarpDrive* architecture is represented in the following class
> > > > > > +diagram:
> > > > > > +
> > > > > > +.. image:: wd-arch.svg
> > > > > > +        :alt: WarpDrive Architecture
> > > > > > +
> > > > > > +
> > > > > > +The user API
> > > > > > +------------
> > > > > > +
> > > > > > +We adopt a polling style interface in the user space: ::
> > > > > > +
> > > > > > +        int wd_request_queue(struct wd_queue *q);
> > > > > > +        void wd_release_queue(struct wd_queue *q);
> > > > > > +
> > > > > > +        int wd_send(struct wd_queue *q, void *req);
> > > > > > +        int wd_recv(struct wd_queue *q, void **req);
> > > > > > +        int wd_recv_sync(struct wd_queue *q, void **req);
> > > > > > +        void wd_flush(struct wd_queue *q);
> > > > > > +
> > > > > > +wd_recv_sync() is a wrapper to its non-sync version. It will trapped into
> > > > > > +kernel and waits until the queue become available.
> > > > > > +
> > > > > > +If the queue do not support SVA/SVM. The following helper function
> > > > > > +can be used to create Static Virtual Share Memory: ::
> > > > > > +
> > > > > > +        void *wd_preserve_share_memory(struct wd_queue *q, size_t size);
> > > > > > +
> > > > > > +The user API is not mandatory. It is simply a suggestion and hint what the
> > > > > > +kernel interface is supposed to support.
> > > > > > +
> > > > > > +
> > > > > > +The user driver
> > > > > > +---------------
> > > > > > +
> > > > > > +The queue file mmap space will need a user driver to wrap the communication
> > > > > > +protocol. *UACCE* provides some attributes in sysfs for the user driver to
> > > > > > +match the right accelerator accordingly.
> > > > > > +
> > > > > > +The *UACCE* device attribute is under the following directory:
> > > > > > +
> > > > > > +/sys/class/uacce/<dev-name>/params
> > > > > > +
> > > > > > +The following attributes is supported:
> > > > > > +
> > > > > > +nr_queue_remained (ro)
> > > > > > +        number of queue remained
> > > > > > +
> > > > > > +api_version (ro)
> > > > > > +        a string to identify the queue mmap space format and its version
> > > > > > +
> > > > > > +device_attr (ro)
> > > > > > +        attributes of the device, see UACCE_DEV_xxx flag defined in uacce.h
> > > > > > +
> > > > > > +numa_node (ro)
> > > > > > +        id of numa node
> > > > > > +
> > > > > > +priority (rw)
> > > > > > +        Priority or the device, bigger is higher
> > > > > > +
> > > > > > +(This is not yet implemented in RFC version)
> > > > > > +
> > > > > > +
> > > > > > +The kernel API
> > > > > > +--------------
> > > > > > +
> > > > > > +The *uacce* kernel API is defined in uacce.h. If the hardware support SVM/SVA,
> > > > > > +The driver need only the following API functions: ::
> > > > > > +
> > > > > > +        int uacce_register(uacce);
> > > > > > +        void uacce_unregister(uacce);
> > > > > > +        void uacce_wake_up(q);
> > > > > > +
> > > > > > +*uacce_wake_up* is used to notify the process who epoll() on the queue file.
> > > > > > +
> > > > > > +According to the IOMMU capability, *uacce* categories the devices as follow:
> > > > > > +
> > > > > > +UACCE_DEV_NOIOMMU
> > > > > > +        The device has no IOMMU. The user process cannot use VA on the hardware
> > > > > > +        This mode is not recommended.
> > > > > > +
> > > > > > +UACCE_DEV_SVA (UACCE_DEV_PASID | UACCE_DEV_FAULT_FROM_DEV)
> > > > > > +        The device has IOMMU which can share the same page table with user
> > > > > > +        process
> > > > > > +
> > > > > > +UACCE_DEV_SHARE_DOMAIN
> > > > > > +        The device has IOMMU which has no multiple page table and device page
> > > > > > +        fault support
> > > > > > +
> > > > > > +If the device works in mode other than UACCE_DEV_NOIOMMU, *uacce* will set its
> > > > > > +IOMMU to IOMMU_DOMAIN_UNMANAGED. So the driver must not use any kernel
> > > > > > +DMA API but the following ones from *uacce* instead: ::
> > > > > > +
> > > > > > +        uacce_dma_map(q, va, size, prot);
> > > > > > +        uacce_dma_unmap(q, va, size, prot);
> > > > > > +
> > > > > > +*uacce_dma_map/unmap* is valid only for UACCE_DEV_SVA device. It creates a
> > > > > > +particular PASID and page table for the kernel in the IOMMU (Not yet
> > > > > > +implemented in the RFC)
> > > > > > +
> > > > > > +For the UACCE_DEV_SHARE_DOMAIN device, uacce_dma_map/unmap is not valid.
> > > > > > +*Uacce* call back start_queue only when the DUS and DKO region is mmapped. The
> > > > > > +accelerator driver must use those dma buffer, via uacce_queue->qfrs[], on
> > > > > > +start_queue call back. The size of the queue file region is defined by
> > > > > > +uacce->ops->qf_pg_start[].
> > > > > > +
> > > > > > +We have to do it this way because most of current IOMMU cannot support the
> > > > > > +kernel and user virtual address at the same time. So we have to let them both
> > > > > > +share the same user virtual address space.
> > > > > > +
> > > > > > +If the device have to support kernel and user at the same time, both kernel
> > > > > > +and the user should use these DMA API. This is not convenient. A better
> > > > > > +solution is to change the future DMA/IOMMU design to let them separate the
> > > > > > +address space between the user and kernel space. But it is not going to be in
> > > > > > +a short time.
> > > > > > +
> > > > > > +
> > > > > > +Multiple processes support
> > > > > > +==========================
> > > > > > +
> > > > > > +In the latest mainline kernel (4.19) when this document is written, the IOMMU
> > > > > > +subsystem do not support multiple process page tables yet.
> > > > > > +
> > > > > > +Most IOMMU hardware implementation support multi-process with the concept
> > > > > > +of PASID. But they may use different name, e.g. it is call sub-stream-id in
> > > > > > +SMMU of ARM. With PASID or similar design, multi page table can be added to
> > > > > > +the IOMMU and referred by its PASID.
> > > > > > +
> > > > > > +*JPB* has a patchset to enable this[1]_. We have tested it with our hardware
> > > > > > +(which is known as *D06*). It works well. *WarpDrive* rely on them to support
> > > > > > +UACCE_DEV_SVA. If it is not enabled, *WarpDrive* can still work. But it
> > > > > > +support only one process, the device will be set to UACCE_DEV_SHARE_DOMAIN
> > > > > > +even it is set to UACCE_DEV_SVA initially.
> > > > > > +
> > > > > > +Static Share Virtual Memory is mainly used by UACCE_DEV_SHARE_DOMAIN device.
> > > > > > +
> > > > > > +
> > > > > > +Legacy Mode Support
> > > > > > +===================
> > > > > > +For the hardware without IOMMU, WarpDrive can still work, the only problem is
> > > > > > +VA cannot be used in the device. The driver should adopt another strategy for
> > > > > > +the shared memory. It is only for testing, and not recommended.
> > > > > > +
> > > > > > +
> > > > > > +The Folk Scenario
> > > > > > +=================
> > > > > > +For a process with allocated queues and shared memory, what happen if it forks
> > > > > > +a child?
> > > > > > +
> > > > > > +The fd of the queue will be duplicated on folk, so the child can send request
> > > > > > +to the same queue as its parent. But the requests which is sent from processes
> > > > > > +except for the one who open the queue will be blocked.
> > > > > > +
> > > > > > +It is recommended to add O_CLOEXEC to the queue file.
> > > > > > +
> > > > > > +The queue mmap space has a VM_DONTCOPY in its VMA. So the child will lost all
> > > > > > +those VMAs.
> > > > > > +
> > > > > > +This is why *WarpDrive* does not adopt the mode used in *VFIO* and *InfiniBand*.
> > > > > > +Both solutions can set any user pointer for hardware sharing. But they cannot
> > > > > > +support fork when the dma is in process. Or the "Copy-On-Write" procedure will
> > > > > > +make the parent process lost its physical pages.
> > > > > > +
> > > > > > +
> > > > > > +The Sample Code
> > > > > > +===============
> > > > > > +There is a sample user land implementation with a simple driver for Hisilicon
> > > > > > +Hi1620 ZIP Accelerator.
> > > > > > +
> > > > > > +To test, do the following in samples/warpdrive (for the case of PC host): ::
> > > > > > +        ./autogen.sh
> > > > > > +        ./conf.sh       # or simply ./configure if you build on target system
> > > > > > +        make
> > > > > > +
> > > > > > +Then you can get test_hisi_zip in the test subdirectory. Copy it to the target
> > > > > > +system and make sure the hisi_zip driver is enabled (the major and minor of
> > > > > > +the uacce chrdev can be gotten from the dmesg or sysfs), and run: ::
> > > > > > +        mknod /dev/ua1 c <major> <minior>
> > > > > > +        test/test_hisi_zip -z < data > data.zip
> > > > > > +        test/test_hisi_zip -g < data > data.gzip
> > > > > > +
> > > > > > +
> > > > > > +References
> > > > > > +==========
> > > > > > +.. [1] https://patchwork.kernel.org/patch/10394851/
> > > > > > +
> > > > > > +.. vim: tw=78
> > [...]
> > > > > > --
> > > > > > 2.17.1
> > > > > >



[Index of Archives]     [Kernel]     [Gnu Classpath]     [Gnu Crypto]     [DM Crypt]     [Netfilter]     [Bugtraq]

  Powered by Linux