Hi Rob,
Thanks for the comments,
On 2018-10-25 23:45, Rob Herring wrote:
On Wed, Oct 17, 2018 at 08:47:55PM +0530, AnilKumar Chimata wrote:
Add dt parameters information specific to the Inline
Crypto Engine (ICE) device.
Signed-off-by: AnilKumar Chimata <anilc@xxxxxxxxxxxxxx>
---
.../devicetree/bindings/crypto/msm/ice.txt | 34
++++++++++++++++++++++
1 file changed, 34 insertions(+)
create mode 100644
Documentation/devicetree/bindings/crypto/msm/ice.txt
diff --git a/Documentation/devicetree/bindings/crypto/msm/ice.txt
b/Documentation/devicetree/bindings/crypto/msm/ice.txt
new file mode 100644
index 0000000..86eed5e
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/msm/ice.txt
@@ -0,0 +1,34 @@
+* Inline Crypto Engine (ICE)
+
+Required properties:
+ - compatible : should be "qcom,ice"
Only 1 version ever? Probably not and this needs an SoC specific
compatible string. Does this follow any standard or ICE is a QCom
thing?
Yes, currently one version and in future we might have to add if there
are any hardware specific changes and this is Qualcomm specific hardware.
+ - reg : <register mapping>
No need to define standard properties. You need to say how many
register
ranges.
Changed.
+
+Optional properties:
+ - interrupt-names : name describing the interrupts for ICE IRQ
No point to this if there is only 1 IRQ.
There are two IRQ lines which hardware can support one for non-secure
operating system and another for secure operating system.
+ - interrupts : <interrupt mapping for ICE IRQ>
+ - qcom,enable-ice-clk : should enable clocks for ICE HW
This shouldn't be needed.
Changed.
+ - clocks : List of phandle and clock specifier pairs
+ - clock-names : List of clock input name strings sorted in
the same
+ order as the clocks property.
How many? You need to give the
Currently four clocks are needed, details updated accordingly.
+ - qcom,op-freq-hz : max clock speed sorted in the same order
as the clocks
+ property.
Use the assigned-clocks properties for this.
Actually that is not a max clock speed, its any array of operating
frequencies which ICE can support.
+ - qcom,instance-type : describe the storage type for which ICE
node is defined
+ currently, only "ufs" and "sdcc" are supported storage type
What if there is more than one instance of ufs or SD? Do you need to
know which ICE goes with which controller?
That is right, needs to have multiple device node entries which
differentiate between storage instances.
+ - power-domains : regulator supply to be used by ICE HW
+
+Example:
+ ufs_ice: ufsice@1d90000 {
crytpo@...
+ compatible = "qcom,ice";
+ reg = <0x1d90000 0x8000>;
+ qcom,enable-ice-clk;
+ clock-names = "ufs_core_clk", "bus_clk",
+ "iface_clk", "ice_core_clk";
+ clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
+ <&gcc GCC_UFS_MEM_CLKREF_CLK>,
+ <&gcc GCC_UFS_PHY_AHB_CLK>,
+ <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
+ qcom,op-freq-hz = <0>, <0>, <0>, <300000000>;
+ power-domains = <&gcc UFS_PHY_GDSC>;
+ qcom,instance-type = "ufs";
+ };
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora
Forum,
a Linux Foundation Collaborative Project
