[PATCH net-next v8 17/28] zinc: Poly1305 MIPS32r2 and MIPS64 implementations

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This MIPS32r2 implementation comes from René van Dorst and me and
results in a nice speedup on the usual OpenWRT targets. The MIPS64
implementation from Andy Polyakov ported here  results in a nice speedup
on commodity Octeon hardware, and has been modified slightly from the
original:

- The function names have been renamed to fit kernel conventions.
- A comment has been added.

Signed-off-by: Jason A. Donenfeld <Jason@xxxxxxxxx>
Signed-off-by: René van Dorst <opensource@xxxxxxxxxx>
Co-developed-by: René van Dorst <opensource@xxxxxxxxxx>
Cc: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
Cc: Paul Burton <paul.burton@xxxxxxxx>
Cc: James Hogan <jhogan@xxxxxxxxxx>
Cc: linux-mips@xxxxxxxxxxxxxx
Cc: Samuel Neves <sneves@xxxxxxxxx>
Cc: Jean-Philippe Aumasson <jeanphilippe.aumasson@xxxxxxxxx>
Cc: Andy Lutomirski <luto@xxxxxxxxxx>
Cc: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
Cc: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
Cc: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
Cc: kernel-hardening@xxxxxxxxxxxxxxxxxx
Cc: linux-crypto@xxxxxxxxxxxxxxx
---
 lib/zinc/Makefile                             |   3 +
 lib/zinc/poly1305/poly1305-mips-glue.c        |  37 ++
 lib/zinc/poly1305/poly1305-mips.S             | 407 ++++++++++++++++++
 ...-mips64-cryptogams.S => poly1305-mips64.S} |  80 ++--
 lib/zinc/poly1305/poly1305.c                  |   2 +
 5 files changed, 500 insertions(+), 29 deletions(-)
 create mode 100644 lib/zinc/poly1305/poly1305-mips-glue.c
 create mode 100644 lib/zinc/poly1305/poly1305-mips.S
 rename lib/zinc/poly1305/{poly1305-mips64-cryptogams.S => poly1305-mips64.S} (75%)

diff --git a/lib/zinc/Makefile b/lib/zinc/Makefile
index c09fd3de60f9..5c4b1d51cb03 100644
--- a/lib/zinc/Makefile
+++ b/lib/zinc/Makefile
@@ -14,4 +14,7 @@ zinc_poly1305-y := poly1305/poly1305.o
 zinc_poly1305-$(CONFIG_ZINC_ARCH_X86_64) += poly1305/poly1305-x86_64.o
 zinc_poly1305-$(CONFIG_ZINC_ARCH_ARM) += poly1305/poly1305-arm.o
 zinc_poly1305-$(CONFIG_ZINC_ARCH_ARM64) += poly1305/poly1305-arm64.o
+zinc_poly1305-$(CONFIG_ZINC_ARCH_MIPS) += poly1305/poly1305-mips.o
+AFLAGS_poly1305-mips.o += -O2 # This is required to fill the branch delay slots
+zinc_poly1305-$(CONFIG_ZINC_ARCH_MIPS64) += poly1305/poly1305-mips64.o
 obj-$(CONFIG_ZINC_POLY1305) += zinc_poly1305.o
diff --git a/lib/zinc/poly1305/poly1305-mips-glue.c b/lib/zinc/poly1305/poly1305-mips-glue.c
new file mode 100644
index 000000000000..1eba9512a05c
--- /dev/null
+++ b/lib/zinc/poly1305/poly1305-mips-glue.c
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2015-2018 Jason A. Donenfeld <Jason@xxxxxxxxx>. All Rights Reserved.
+ */
+
+asmlinkage void poly1305_init_mips(void *ctx, const u8 key[16]);
+asmlinkage void poly1305_blocks_mips(void *ctx, const u8 *inp, const size_t len,
+				     const u32 padbit);
+asmlinkage void poly1305_emit_mips(void *ctx, u8 mac[16], const u32 nonce[4]);
+
+static bool *const poly1305_nobs[] __initconst = { };
+static void __init poly1305_fpu_init(void)
+{
+}
+
+static inline bool poly1305_init_arch(void *ctx,
+				      const u8 key[POLY1305_KEY_SIZE])
+{
+	poly1305_init_mips(ctx, key);
+	return true;
+}
+
+static inline bool poly1305_blocks_arch(void *ctx, const u8 *inp,
+					size_t len, const u32 padbit,
+					simd_context_t *simd_context)
+{
+	poly1305_blocks_mips(ctx, inp, len, padbit);
+	return true;
+}
+
+static inline bool poly1305_emit_arch(void *ctx, u8 mac[POLY1305_MAC_SIZE],
+				      const u32 nonce[4],
+				      simd_context_t *simd_context)
+{
+	poly1305_emit_mips(ctx, mac, nonce);
+	return true;
+}
diff --git a/lib/zinc/poly1305/poly1305-mips.S b/lib/zinc/poly1305/poly1305-mips.S
new file mode 100644
index 000000000000..4d695eef1091
--- /dev/null
+++ b/lib/zinc/poly1305/poly1305-mips.S
@@ -0,0 +1,407 @@
+/* SPDX-License-Identifier: GPL-2.0 OR MIT */
+/*
+ * Copyright (C) 2016-2018 René van Dorst <opensource@xxxxxxxxxx> All Rights Reserved.
+ * Copyright (C) 2015-2018 Jason A. Donenfeld <Jason@xxxxxxxxx>. All Rights Reserved.
+ */
+
+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
+#define MSB 0
+#define LSB 3
+#else
+#define MSB 3
+#define LSB 0
+#endif
+
+#define POLY1305_BLOCK_SIZE 16
+.text
+#define H0 $t0
+#define H1 $t1
+#define H2 $t2
+#define H3 $t3
+#define H4 $t4
+
+#define R0 $t5
+#define R1 $t6
+#define R2 $t7
+#define R3 $t8
+
+#define O0 $s0
+#define O1 $s4
+#define O2 $v1
+#define O3 $t9
+#define O4 $s5
+
+#define S1 $s1
+#define S2 $s2
+#define S3 $s3
+
+#define SC $at
+#define CA $v0
+
+/* Input arguments */
+#define poly	$a0
+#define src	$a1
+#define srclen	$a2
+#define hibit	$a3
+
+/* Location in the opaque buffer
+ * R[0..3], CA, H[0..4]
+ */
+#define PTR_POLY1305_R(n) ( 0 + (n*4)) ## ($a0)
+#define PTR_POLY1305_CA   (16        ) ## ($a0)
+#define PTR_POLY1305_H(n) (20 + (n*4)) ## ($a0)
+
+#define POLY1305_BLOCK_SIZE 16
+#define POLY1305_STACK_SIZE 32
+
+.set	noat
+.align	4
+.globl	poly1305_blocks_mips
+.ent	poly1305_blocks_mips
+poly1305_blocks_mips:
+	.frame	$sp, POLY1305_STACK_SIZE, $ra
+	/* srclen &= 0xFFFFFFF0 */
+	ins	srclen, $zero, 0, 4
+
+	addiu	$sp, -(POLY1305_STACK_SIZE)
+
+	/* check srclen >= 16 bytes */
+	beqz	srclen, .Lpoly1305_blocks_mips_end
+
+	/* Calculate last round based on src address pointer.
+	 * last round src ptr (srclen) = src + (srclen & 0xFFFFFFF0)
+	 */
+	addu	srclen, src
+
+	lw	R0, PTR_POLY1305_R(0)
+	lw	R1, PTR_POLY1305_R(1)
+	lw	R2, PTR_POLY1305_R(2)
+	lw	R3, PTR_POLY1305_R(3)
+
+	/* store the used save registers. */
+	sw	$s0, 0($sp)
+	sw	$s1, 4($sp)
+	sw	$s2, 8($sp)
+	sw	$s3, 12($sp)
+	sw	$s4, 16($sp)
+	sw	$s5, 20($sp)
+
+	/* load Hx and Carry */
+	lw	CA, PTR_POLY1305_CA
+	lw	H0, PTR_POLY1305_H(0)
+	lw	H1, PTR_POLY1305_H(1)
+	lw	H2, PTR_POLY1305_H(2)
+	lw	H3, PTR_POLY1305_H(3)
+	lw	H4, PTR_POLY1305_H(4)
+
+	/* Sx = Rx + (Rx >> 2) */
+	srl	S1, R1, 2
+	srl	S2, R2, 2
+	srl	S3, R3, 2
+	addu	S1, R1
+	addu	S2, R2
+	addu	S3, R3
+
+	addiu	SC, $zero, 1
+
+.Lpoly1305_loop:
+	lwl	O0, 0+MSB(src)
+	lwl	O1, 4+MSB(src)
+	lwl	O2, 8+MSB(src)
+	lwl	O3,12+MSB(src)
+	lwr	O0, 0+LSB(src)
+	lwr	O1, 4+LSB(src)
+	lwr	O2, 8+LSB(src)
+	lwr	O3,12+LSB(src)
+
+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
+	wsbh	O0
+	wsbh	O1
+	wsbh	O2
+	wsbh	O3
+	rotr	O0, 16
+	rotr	O1, 16
+	rotr	O2, 16
+	rotr	O3, 16
+#endif
+
+	/* h0 = (u32)(d0 = (u64)h0 + inp[0] + c 'Carry_previous cycle'); */
+	addu	H0, CA
+	sltu	CA, H0, CA
+	addu	O0, H0
+	sltu	H0, O0, H0
+	addu	CA, H0
+
+	/* h1 = (u32)(d1 = (u64)h1 + (d0 >> 32) + inp[4]); */
+	addu	H1, CA
+	sltu	CA, H1, CA
+	addu	O1, H1
+	sltu	H1, O1, H1
+	addu	CA, H1
+
+	/* h2 = (u32)(d2 = (u64)h2 + (d1 >> 32) + inp[8]); */
+	addu	H2, CA
+	sltu	CA, H2, CA
+	addu	O2, H2
+	sltu	H2, O2, H2
+	addu	CA, H2
+
+	/* h3 = (u32)(d3 = (u64)h3 + (d2 >> 32) + inp[12]); */
+	addu	H3, CA
+	sltu	CA, H3, CA
+	addu	O3, H3
+	sltu	H3, O3, H3
+	addu	CA, H3
+
+	/* h4 += (u32)(d3 >> 32) + padbit; */
+	addu	H4, hibit
+	addu	O4, H4, CA
+
+	/* D0 */
+	multu	O0, R0
+	maddu	O1, S3
+	maddu	O2, S2
+	maddu	O3, S1
+	mfhi	CA
+	mflo	H0
+
+	/* D1 */
+	multu	O0, R1
+	maddu	O1, R0
+	maddu	O2, S3
+	maddu	O3, S2
+	maddu	O4, S1
+	maddu	CA, SC
+	mfhi	CA
+	mflo	H1
+
+	/* D2 */
+	multu	O0, R2
+	maddu	O1, R1
+	maddu	O2, R0
+	maddu	O3, S3
+	maddu	O4, S2
+	maddu	CA, SC
+	mfhi	CA
+	mflo	H2
+
+	/* D4 */
+	mul	H4, O4, R0
+
+	/* D3 */
+	multu	O0, R3
+	maddu	O1, R2
+	maddu	O2, R1
+	maddu	O3, R0
+	maddu	O4, S3
+	maddu	CA, SC
+	mfhi	CA
+	mflo	H3
+
+	addiu	src, POLY1305_BLOCK_SIZE
+
+	/* h4 += (u32)(d3 >> 32); */
+	addu	O4, H4, CA
+	/* h4 &= 3 */
+	andi	H4, O4, 3
+	/* c = (h4 >> 2) + (h4 & ~3U); */
+	srl	CA, O4, 2
+	ins	O4, $zero, 0, 2
+
+	addu	CA, O4
+
+	/* able to do a 16 byte block. */
+	bne	src, srclen, .Lpoly1305_loop
+
+	/* restore the used save registers. */
+	lw	$s0, 0($sp)
+	lw	$s1, 4($sp)
+	lw	$s2, 8($sp)
+	lw	$s3, 12($sp)
+	lw	$s4, 16($sp)
+	lw	$s5, 20($sp)
+
+	/* store Hx and Carry */
+	sw	CA, PTR_POLY1305_CA
+	sw	H0, PTR_POLY1305_H(0)
+	sw	H1, PTR_POLY1305_H(1)
+	sw	H2, PTR_POLY1305_H(2)
+	sw	H3, PTR_POLY1305_H(3)
+	sw	H4, PTR_POLY1305_H(4)
+
+.Lpoly1305_blocks_mips_end:
+	addiu	$sp, POLY1305_STACK_SIZE
+
+	/* Jump Back */
+	jr	$ra
+.end poly1305_blocks_mips
+.set at
+
+/* Input arguments CTX=$a0, MAC=$a1, NONCE=$a2 */
+#define MAC	$a1
+#define NONCE	$a2
+
+#define G0	$t5
+#define G1	$t6
+#define G2	$t7
+#define G3	$t8
+#define G4	$t9
+
+.set	noat
+.align	4
+.globl	poly1305_emit_mips
+.ent	poly1305_emit_mips
+poly1305_emit_mips:
+	/* load Hx and Carry */
+	lw	CA, PTR_POLY1305_CA
+	lw	H0, PTR_POLY1305_H(0)
+	lw	H1, PTR_POLY1305_H(1)
+	lw	H2, PTR_POLY1305_H(2)
+	lw	H3, PTR_POLY1305_H(3)
+	lw	H4, PTR_POLY1305_H(4)
+
+	/* Add left over carry */
+	addu	H0, CA
+	sltu	CA, H0, CA
+	addu	H1, CA
+	sltu	CA, H1, CA
+	addu	H2, CA
+	sltu	CA, H2, CA
+	addu	H3, CA
+	sltu	CA, H3, CA
+	addu	H4, CA
+
+	/* compare to modulus by computing h + -p */
+	addiu	G0, H0, 5
+	sltu	CA, G0, H0
+	addu	G1, H1, CA
+	sltu	CA, G1, H1
+	addu	G2, H2, CA
+	sltu	CA, G2, H2
+	addu	G3, H3, CA
+	sltu	CA, G3, H3
+	addu	G4, H4, CA
+
+	srl	SC, G4, 2
+
+	/* if there was carry into 131st bit, h3:h0 = g3:g0 */
+	movn	H0, G0, SC
+	movn	H1, G1, SC
+	movn	H2, G2, SC
+	movn	H3, G3, SC
+
+	lwl	G0, 0+MSB(NONCE)
+	lwl	G1, 4+MSB(NONCE)
+	lwl	G2, 8+MSB(NONCE)
+	lwl	G3,12+MSB(NONCE)
+	lwr	G0, 0+LSB(NONCE)
+	lwr	G1, 4+LSB(NONCE)
+	lwr	G2, 8+LSB(NONCE)
+	lwr	G3,12+LSB(NONCE)
+
+	/* mac = (h + nonce) % (2^128) */
+	addu	H0, G0
+	sltu	CA, H0, G0
+
+	/* H1 */
+	addu	H1, CA
+	sltu	CA, H1, CA
+	addu	H1, G1
+	sltu	G1, H1, G1
+	addu	CA, G1
+
+	/* H2 */
+	addu	H2, CA
+	sltu	CA, H2, CA
+	addu	H2, G2
+	sltu	G2, H2, G2
+	addu	CA, G2
+
+	/* H3 */
+	addu	H3, CA
+	addu	H3, G3
+
+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
+	wsbh	H0
+	wsbh	H1
+	wsbh	H2
+	wsbh	H3
+	rotr	H0, 16
+	rotr	H1, 16
+	rotr	H2, 16
+	rotr	H3, 16
+#endif
+
+	/* store MAC */
+	swl	H0, 0+MSB(MAC)
+	swl	H1, 4+MSB(MAC)
+	swl	H2, 8+MSB(MAC)
+	swl	H3,12+MSB(MAC)
+	swr	H0, 0+LSB(MAC)
+	swr	H1, 4+LSB(MAC)
+	swr	H2, 8+LSB(MAC)
+	swr	H3,12+LSB(MAC)
+
+	jr	$ra
+.end poly1305_emit_mips
+
+#define PR0 $t0
+#define PR1 $t1
+#define PR2 $t2
+#define PR3 $t3
+#define PT0 $t4
+
+/* Input arguments CTX=$a0, KEY=$a1 */
+
+.align	4
+.globl	poly1305_init_mips
+.ent	poly1305_init_mips
+poly1305_init_mips:
+	lwl	PR0, 0+MSB($a1)
+	lwl	PR1, 4+MSB($a1)
+	lwl	PR2, 8+MSB($a1)
+	lwl	PR3,12+MSB($a1)
+	lwr	PR0, 0+LSB($a1)
+	lwr	PR1, 4+LSB($a1)
+	lwr	PR2, 8+LSB($a1)
+	lwr	PR3,12+LSB($a1)
+
+	/* store Hx and Carry */
+	sw	$zero, PTR_POLY1305_CA
+	sw	$zero, PTR_POLY1305_H(0)
+	sw	$zero, PTR_POLY1305_H(1)
+	sw	$zero, PTR_POLY1305_H(2)
+	sw	$zero, PTR_POLY1305_H(3)
+	sw	$zero, PTR_POLY1305_H(4)
+
+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
+	wsbh	PR0
+	wsbh	PR1
+	wsbh	PR2
+	wsbh	PR3
+	rotr	PR0, 16
+	rotr	PR1, 16
+	rotr	PR2, 16
+	rotr	PR3, 16
+#endif
+
+	lui	PT0, 0x0FFF
+	ori	PT0, 0xFFFC
+
+	/* AND 0x0fffffff; */
+	ext	PR0, PR0, 0, (32-4)
+
+	/* AND 0x0ffffffc; */
+	and	PR1, PT0
+	and	PR2, PT0
+	and	PR3, PT0
+
+	/* store Rx */
+	sw	PR0, PTR_POLY1305_R(0)
+	sw	PR1, PTR_POLY1305_R(1)
+	sw	PR2, PTR_POLY1305_R(2)
+	sw	PR3, PTR_POLY1305_R(3)
+
+	/* Jump Back  */
+	jr	$ra
+.end poly1305_init_mips
diff --git a/lib/zinc/poly1305/poly1305-mips64-cryptogams.S b/lib/zinc/poly1305/poly1305-mips64.S
similarity index 75%
rename from lib/zinc/poly1305/poly1305-mips64-cryptogams.S
rename to lib/zinc/poly1305/poly1305-mips64.S
index 24a6005884c3..272a86c47bcb 100644
--- a/lib/zinc/poly1305/poly1305-mips64-cryptogams.S
+++ b/lib/zinc/poly1305/poly1305-mips64.S
@@ -1,26 +1,49 @@
 /* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
 /*
+ * Copyright (C) 2015-2018 Jason A. Donenfeld <Jason@xxxxxxxxx>. All Rights Reserved.
  * Copyright (C) 2006-2017 CRYPTOGAMS by <appro@xxxxxxxxxxx>. All Rights Reserved.
+ *
+ * This is based in part on Andy Polyakov's implementation from CRYPTOGAMS.
  */
 
-#include "mips_arch.h"
+#if (defined(_MIPS_ARCH_MIPS64R3) || defined(_MIPS_ARCH_MIPS64R5) || \
+     defined(_MIPS_ARCH_MIPS64R6)) && !defined(_MIPS_ARCH_MIPS64R2)
+#define _MIPS_ARCH_MIPS64R2
+#endif
+
+#ifdef __MIPSEB__
+#define MSB 0
+#define LSB 7
+#else
+#define MSB 7
+#define LSB 0
+#endif
 
-#ifdef MIPSEB
-# define MSB 0
-# define LSB 7
+#if defined(_MIPS_ARCH_MIPS64R6)
+#define dmultu(rs,rt)
+#define mflo(rd,rs,rt)	dmulu	rd,rs,rt
+#define mfhi(rd,rs,rt)	dmuhu	rd,rs,rt
 #else
-# define MSB 7
-# define LSB 0
+#define dmultu(rs,rt)		dmultu	rs,rt
+#define multu(rs,rt)		multu	rs,rt
+#define mflo(rd,rs,rt)	mflo	rd
+#define mfhi(rd,rs,rt)	mfhi	rd
 #endif
 
 .text
 .set	noat
 .set	noreorder
 
+/* While most of the assembly in the kernel prefers ENTRY() and ENDPROC(),
+ * there is no existing MIPS assembly that uses it, and MIPS assembler seems
+ * to like its own .ent/.end notation, which the MIPS include files don't
+ * provide in a MIPS-specific ENTRY/ENDPROC definition. So, we skip these
+ * for now, until somebody complains. */
+
 .align	5
-.globl	poly1305_init
-.ent	poly1305_init
-poly1305_init:
+.globl	poly1305_init_mips
+.ent	poly1305_init_mips
+poly1305_init_mips:
 	.frame	$29,0,$31
 	.set	reorder
 
@@ -39,13 +62,13 @@ poly1305_init:
 	ldr	$8,0+LSB($5)
 	ldr	$9,8+LSB($5)
 #endif
-#ifdef	MIPSEB
-# if defined(_MIPS_ARCH_MIPS64R2)
+#ifdef	__MIPSEB__
+#if defined(_MIPS_ARCH_MIPS64R2)
 	dsbh	$8,$8		# byte swap
 	 dsbh	$9,$9
 	dshd	$8,$8
 	 dshd	$9,$9
-# else
+#else
 	ori	$10,$0,0xFF
 	dsll	$1,$10,32
 	or	$10,$1		# 0x000000FF000000FF
@@ -79,7 +102,7 @@ poly1305_init:
 	 dsll	$9,32
 	or	$8,$11
 	 or	$9,$2
-# endif
+#endif
 #endif
 	li	$10,1
 	dsll	$10,32
@@ -100,18 +123,19 @@ poly1305_init:
 .Lno_key:
 	li	$2,0			# return 0
 	jr	$31
-.end	poly1305_init
+.end	poly1305_init_mips
+
 .align	5
-.globl	poly1305_blocks
-.ent	poly1305_blocks
-poly1305_blocks:
+.globl	poly1305_blocks_mips
+.ent	poly1305_blocks_mips
+poly1305_blocks_mips:
 	.set	noreorder
 	dsrl	$6,4			# number of complete blocks
 	bnez	$6,poly1305_blocks_internal
 	nop
 	jr	$31
 	nop
-.end	poly1305_blocks
+.end	poly1305_blocks_mips
 
 .align	5
 .ent	poly1305_blocks_internal
@@ -144,13 +168,13 @@ poly1305_blocks_internal:
 #endif
 	daddiu	$6,-1
 	daddiu	$5,16
-#ifdef	MIPSEB
-# if defined(_MIPS_ARCH_MIPS64R2)
+#ifdef	__MIPSEB__
+#if defined(_MIPS_ARCH_MIPS64R2)
 	dsbh	$8,$8		# byte swap
 	 dsbh	$9,$9
 	dshd	$8,$8
 	 dshd	$9,$9
-# else
+#else
 	ori	$10,$0,0xFF
 	dsll	$1,$10,32
 	or	$10,$1		# 0x000000FF000000FF
@@ -184,7 +208,7 @@ poly1305_blocks_internal:
 	 dsll	$9,32
 	or	$8,$11
 	 or	$9,$2
-# endif
+#endif
 #endif
 	daddu	$12,$8		# accumulate input
 	daddu	$13,$9
@@ -257,10 +281,11 @@ poly1305_blocks_internal:
 	jr	$31
 	daddu	$29,6*8
 .end	poly1305_blocks_internal
+
 .align	5
-.globl	poly1305_emit
-.ent	poly1305_emit
-poly1305_emit:
+.globl	poly1305_emit_mips
+.ent	poly1305_emit_mips
+poly1305_emit_mips:
 	.frame	$29,0,$31
 	.set	reorder
 
@@ -332,7 +357,4 @@ poly1305_emit:
 	sb	$11,15($5)
 
 	jr	$31
-.end	poly1305_emit
-.rdata
-.asciiz	"Poly1305 for MIPS64, CRYPTOGAMS by <appro@xxxxxxxxxxx>"
-.align	2
+.end	poly1305_emit_mips
diff --git a/lib/zinc/poly1305/poly1305.c b/lib/zinc/poly1305/poly1305.c
index 21d9a0b9c11c..69e634c8a8d9 100644
--- a/lib/zinc/poly1305/poly1305.c
+++ b/lib/zinc/poly1305/poly1305.c
@@ -20,6 +20,8 @@
 #include "poly1305-x86_64-glue.c"
 #elif defined(CONFIG_ZINC_ARCH_ARM) || defined(CONFIG_ZINC_ARCH_ARM64)
 #include "poly1305-arm-glue.c"
+#elif defined(CONFIG_ZINC_ARCH_MIPS) || defined(CONFIG_ZINC_ARCH_MIPS64)
+#include "poly1305-mips-glue.c"
 #else
 static inline bool poly1305_init_arch(void *ctx,
 				      const u8 key[POLY1305_KEY_SIZE])
-- 
2.19.1




[Index of Archives]     [Kernel]     [Gnu Classpath]     [Gnu Crypto]     [DM Crypt]     [Netfilter]     [Bugtraq]

  Powered by Linux