This is another resend:
Andrew, can you please pick this set up again so it can get into
linux-next again? Or let me know if there's something else I should do.
Thanks,
Logan
--
Changes since v21:
- Rebased onto v4.19-rc6 (No Changes)
Changes since v20:
- Rebased onto v4.19-rc3 (No Changes)
Changes since v19:
- Rebased onto v4.19-rc1 (No Changes)
Changes since v18:
- Dropped the CAAM patch as it was subtly wrong and broke when people
tested it in linux-next. Seeing the code is much trickier than it
appears, we'll leave it to its maintainers to clean it up,
should they chose.
- Restored the ioread64/iowrite64 extern prototypes as despite
appearing to be unusued, they are in fact used in a rare corner case
by the caam driver on 64bit powerpc. This was reported by Guenter testing
on linux-next.
- Rebased onto v4.18-rc4 (No Changes)
Changes since v17:
- Rebased onto v4.18-rc1 (No Changes)
Changes since v16:
- Rebased onto v4.17-rc4 (No Changes)
Changes since v15:
- Rebased onto v4.17-rc1, dropping the powerpc patches which were
picked up by Michael
Changes since v14:
- Rebased onto v4.16-rc7
- Replace the first two patches so that instead of correcting the
endianness annotations we change to using writeX() and readX() with
swabX() calls. This makes the big-endian functions more symmetric
with the little-endian versions (with respect to barriers that are
not included in the raw functions). As a side effect, it also fixes
the kbuild warnings that the first two patches tried to address.
Changes since v13:
- Changed the subject of patch 0001 to correct a nit pointed out by Luc
Changes since v12:
- Rebased onto v4.16-rc6
- Split patch 0001 into two and reworked the commit log as requested
by Luc Van Oostenryck
Changes since v11:
- Rebased onto v4.16-rc5
- Added a patch (0001) to fix some old and new sparse warnings
that the kbuild robot warned about this cycle. The latest version
of sparse was required to reproduce these.
- Added a patch (0002) to add io{read|write}64 to parisc which the kbuild
robot also found errors for this cycle
Changes since v10:
- Rebased onto v4.16-rc4, this droped the drm/tilcdc patch which was
picked up by that tree and is already in 4.16.
Changes since v9:
- Rebased onto v4.15-rc6
- Fixed a couple of issues in the new version of the CAAM patch as
pointed out by Horia
Changes since v8:
- Rebased onto v4.15-rc2, as a result rewrote patch 7 seeing someone did
some similar cleanup in that area.
- Added a patch to clean up the Switchtec NTB driver which landed in
v4.15-rc1
Changes since v7:
- Fix minor nits from Andy Shevchenko
- Rebased onto v4.14-rc1
Changes since v6:
** none **
Changes since v5:
- Added a fix to the tilcdc driver to ensure it doesn't use the
non-atomic operation. (This includes adding io{read|write}64[be]_is_nonatomic
defines).
Changes since v4:
- Add functions so the powerpc implementation of iomap.c compiles. (As
noticed by Horia)
Changes since v3:
- I noticed powerpc didn't use the appropriate functions seeing
readq/writeq were not defined when iomap.h was included. Thus I've
included a patch to adjust this
- Fixed some mistakes with a couple of the defines in io-64-nonatomic*
headers
- Fixed a typo noticed by Horia.
(earlier versions were drastically different)
--
Logan Gunthorpe (6):
iomap: Use non-raw io functions for io{read|write}XXbe
parisc: iomap: introduce io{read|write}64
iomap: introduce io{read|write}64_{lo_hi|hi_lo}
io-64-nonatomic: add io{read|write}64[be]{_lo_hi|_hi_lo} macros
ntb: ntb_hw_intel: use io-64-nonatomic instead of in-driver hacks
ntb: ntb_hw_switchtec: Cleanup 64bit IO defines to use the common
header
arch/parisc/include/asm/io.h | 9 ++
arch/parisc/lib/iomap.c | 64 +++++++++++
arch/powerpc/include/asm/io.h | 2 +
drivers/ntb/hw/intel/ntb_hw_intel.h | 30 +-----
drivers/ntb/hw/mscc/ntb_hw_switchtec.c | 36 +------
include/asm-generic/iomap.h | 22 ++++
include/linux/io-64-nonatomic-hi-lo.h | 64 +++++++++++
include/linux/io-64-nonatomic-lo-hi.h | 64 +++++++++++
lib/iomap.c | 140 ++++++++++++++++++++++++-
9 files changed, 366 insertions(+), 65 deletions(-)
--
2.19.0
