On 14 September 2018 at 18:22, Jason A. Donenfeld <Jason@xxxxxxxxx> wrote:
> These NEON and non-NEON implementations come from Andy Polyakov's
> implementation. They are exactly the same as Andy Polyakov's original,
> with the following exceptions:
>
> - Entries and exits use the proper kernel convention macro.
> - CPU feature checking is done in C by the glue code, so that has been
> removed from the assembly.
> - The function names have been renamed to fit kernel conventions.
> - Labels have been renamed to fit kernel conventions.
> - The neon code can jump to the scalar code when it makes sense to do
> so.
>
> After '/^#/d;/^\..*[^:]$/d', the code has the following diff in actual
> instructions from the original.
>
As I asked in response to v3, could we please have this as a separate
patch on top? The diff below is corrupted.
Also, both Andy and Eric have offered to get involved in upstreaming
these changes to OpenSSL, so there is no delta to begin with.
> ARM:
>
> -poly1305_init:
> -.Lpoly1305_init:
> +ENTRY(poly1305_init_arm)
> stmdb sp!,{r4-r11}
>
> eor r3,r3,r3
> @@ -18,8 +25,6 @@
> moveq r0,#0
> beq .Lno_key
>
> - adr r11,.Lpoly1305_init
> - ldr r12,.LOPENSSL_armcap
> ldrb r4,[r1,#0]
> mov r10,#0x0fffffff
> ldrb r5,[r1,#1]
> @@ -34,8 +39,6 @@
> ldrb r7,[r1,#6]
> and r4,r4,r10
>
> - ldr r12,[r11,r12] @ OPENSSL_armcap_P
> - ldr r12,[r12]
> ldrb r8,[r1,#7]
> orr r5,r5,r6,lsl#8
> ldrb r6,[r1,#8]
> @@ -45,22 +48,6 @@
> ldrb r8,[r1,#10]
> and r5,r5,r3
>
> - tst r12,#ARMV7_NEON @ check for NEON
> - adr r9,poly1305_blocks_neon
> - adr r11,poly1305_blocks
> - it ne
> - movne r11,r9
> - adr r12,poly1305_emit
> - adr r10,poly1305_emit_neon
> - it ne
> - movne r12,r10
> - itete eq
> - addeq r12,r11,#(poly1305_emit-.Lpoly1305_init)
> - addne r12,r11,#(poly1305_emit_neon-.Lpoly1305_init)
> - addeq r11,r11,#(poly1305_blocks-.Lpoly1305_init)
> - addne r11,r11,#(poly1305_blocks_neon-.Lpoly1305_init)
> - orr r12,r12,#1 @ thumb-ify address
> - orr r11,r11,#1
> ldrb r9,[r1,#11]
> orr r6,r6,r7,lsl#8
> ldrb r7,[r1,#12]
> @@ -79,17 +66,16 @@
> str r6,[r0,#8]
> and r7,r7,r3
> str r7,[r0,#12]
> - stmia r2,{r11,r12} @ fill functions table
> - mov r0,#1
> - mov r0,#0
> .Lno_key:
> ldmia sp!,{r4-r11}
> bx lr @ bx lr
> tst lr,#1
> moveq pc,lr @ be binary compatible with V4, yet
> .word 0xe12fff1e @ interoperable with Thumb ISA:-)
> -poly1305_blocks:
> -.Lpoly1305_blocks:
> +ENDPROC(poly1305_init_arm)
> +
> +ENTRY(poly1305_blocks_arm)
> +.Lpoly1305_blocks_arm:
> stmdb sp!,{r3-r11,lr}
>
> ands r2,r2,#-16
> @@ -231,10 +217,11 @@
> tst lr,#1
> moveq pc,lr @ be binary compatible with V4, yet
> .word 0xe12fff1e @ interoperable with Thumb ISA:-)
> -poly1305_emit:
> +ENDPROC(poly1305_blocks_arm)
> +
> +ENTRY(poly1305_emit_arm)
> stmdb sp!,{r4-r11}
> .Lpoly1305_emit_enter:
> -
> ldmia r0,{r3-r7}
> adds r8,r3,#5 @ compare to modulus
> adcs r9,r4,#0
> @@ -305,8 +292,12 @@
> tst lr,#1
> moveq pc,lr @ be binary compatible with V4, yet
> .word 0xe12fff1e @ interoperable with Thumb ISA:-)
> +ENDPROC(poly1305_emit_arm)
> +
> +
>
> -poly1305_init_neon:
> +ENTRY(poly1305_init_neon)
> +.Lpoly1305_init_neon:
> ldr r4,[r0,#20] @ load key base 2^32
> ldr r5,[r0,#24]
> ldr r6,[r0,#28]
> @@ -515,8 +506,9 @@
> vst1.32 {d8[1]},[r7]
>
> bx lr @ bx lr
> +ENDPROC(poly1305_init_neon)
>
> -poly1305_blocks_neon:
> +ENTRY(poly1305_blocks_neon)
> ldr ip,[r0,#36] @ is_base2_26
> ands r2,r2,#-16
> beq .Lno_data_neon
> @@ -524,7 +516,7 @@
> cmp r2,#64
> bhs .Lenter_neon
> tst ip,ip @ is_base2_26?
> - beq .Lpoly1305_blocks
> + beq .Lpoly1305_blocks_arm
>
> .Lenter_neon:
> stmdb sp!,{r4-r7}
> @@ -534,7 +526,7 @@
> bne .Lbase2_26_neon
>
> stmdb sp!,{r1-r3,lr}
> - bl poly1305_init_neon
> + bl .Lpoly1305_init_neon
>
> ldr r4,[r0,#0] @ load hash value base 2^32
> ldr r5,[r0,#4]
> @@ -989,8 +981,9 @@
> ldmia sp!,{r4-r7}
> .Lno_data_neon:
> bx lr @ bx lr
> +ENDPROC(poly1305_blocks_neon)
>
> -poly1305_emit_neon:
> +ENTRY(poly1305_emit_neon)
> ldr ip,[r0,#36] @ is_base2_26
>
> stmdb sp!,{r4-r11}
> @@ -1055,6 +1048,6 @@
>
> ldmia sp!,{r4-r11}
> bx lr @ bx lr
> +ENDPROC(poly1305_emit_neon)
>
> ARM64:
>
> -poly1305_init:
> +ENTRY(poly1305_init_arm)
> cmp x1,xzr
> stp xzr,xzr,[x0] // zero hash value
> stp xzr,xzr,[x0,#16] // [along with is_base2_26]
> @@ -11,14 +15,9 @@
> csel x0,xzr,x0,eq
> b.eq .Lno_key
>
> - ldrsw x11,.LOPENSSL_armcap_P
> - ldr x11,.LOPENSSL_armcap_P
In the original, this looks like
#ifdef __ILP32__
ldrsw $t1,.LOPENSSL_armcap_P
#else
ldr $t1,.LOPENSSL_armcap_P
#endif
so I guess git commit ate those lines.
> - adr x10,.LOPENSSL_armcap_P
> -
> ldp x7,x8,[x1] // load key
> mov x9,#0xfffffffc0fffffff
> movk x9,#0x0fff,lsl#48
> - ldr w17,[x10,x11]
> rev x7,x7 // flip bytes
> rev x8,x8
> and x7,x7,x9 // &=0ffffffc0fffffff
> @@ -26,24 +25,11 @@
> and x8,x8,x9 // &=0ffffffc0ffffffc
> stp x7,x8,[x0,#32] // save key value
>
> - tst w17,#ARMV7_NEON
> -
> - adr x12,poly1305_blocks
> - adr x7,poly1305_blocks_neon
> - adr x13,poly1305_emit
> - adr x8,poly1305_emit_neon
> -
> - csel x12,x12,x7,eq
> - csel x13,x13,x8,eq
> -
> - stp w12,w13,[x2]
> - stp x12,x13,[x2]
> -
> - mov x0,#1
> .Lno_key:
> ret
> +ENDPROC(poly1305_init_arm)
>
> -poly1305_blocks:
> +ENTRY(poly1305_blocks_arm)
> ands x2,x2,#-16
> b.eq .Lno_data
>
> @@ -100,8 +86,9 @@
>
> .Lno_data:
> ret
> +ENDPROC(poly1305_blocks_arm)
>
> -poly1305_emit:
> +ENTRY(poly1305_emit_arm)
> ldp x4,x5,[x0] // load hash base 2^64
> ldr x6,[x0,#16]
> ldp x10,x11,[x2] // load nonce
> @@ -124,7 +111,9 @@
> stp x4,x5,[x1] // write result
>
> ret
> -poly1305_mult:
> +ENDPROC(poly1305_emit_arm)
> +
> +__poly1305_mult:
> mul x12,x4,x7 // h0*r0
> umulh x13,x4,x7
>
> @@ -158,7 +147,7 @@
>
> ret
>
> -poly1305_splat:
> +__poly1305_splat:
> and x12,x4,#0x03ffffff // base 2^64 -> base 2^26
> ubfx x13,x4,#26,#26
> extr x14,x5,x4,#52
> @@ -182,11 +171,11 @@
>
> ret
>
> -poly1305_blocks_neon:
> +ENTRY(poly1305_blocks_neon)
> ldr x17,[x0,#24]
> cmp x2,#128
> b.hs .Lblocks_neon
> - cbz x17,poly1305_blocks
> + cbz x17,poly1305_blocks_arm
>
> .Lblocks_neon:
> stp x29,x30,[sp,#-80]!
> @@ -232,7 +221,7 @@
> adcs x5,x5,x13
> adc x6,x6,x3
>
> - bl poly1305_mult
> + bl __poly1305_mult
> ldr x30,[sp,#8]
>
> cbz x3,.Lstore_base2_64_neon
> @@ -274,7 +263,7 @@
> adcs x5,x5,x13
> adc x6,x6,x3
>
> - bl poly1305_mult
> + bl __poly1305_mult
>
> .Linit_neon:
> and x10,x4,#0x03ffffff // base 2^64 -> base 2^26
> @@ -301,19 +290,19 @@
> mov x5,x8
> mov x6,xzr
> add x0,x0,#48+12
> - bl poly1305_splat
> + bl __poly1305_splat
>
> - bl poly1305_mult // r^2
> + bl __poly1305_mult // r^2
> sub x0,x0,#4
> - bl poly1305_splat
> + bl __poly1305_splat
>
> - bl poly1305_mult // r^3
> + bl __poly1305_mult // r^3
> sub x0,x0,#4
> - bl poly1305_splat
> + bl __poly1305_splat
>
> - bl poly1305_mult // r^4
> + bl __poly1305_mult // r^4
> sub x0,x0,#4
> - bl poly1305_splat
> + bl __poly1305_splat
> ldr x30,[sp,#8]
>
> add x16,x1,#32
> @@ -743,10 +732,11 @@
> .Lno_data_neon:
> ldr x29,[sp],#80
> ret
> +ENDPROC(poly1305_blocks_neon)
>
> -poly1305_emit_neon:
> +ENTRY(poly1305_emit_neon)
> ldr x17,[x0,#24]
> - cbz x17,poly1305_emit
> + cbz x17,poly1305_emit_arm
>
> ldp w10,w11,[x0] // load hash value base 2^26
> ldp w12,w13,[x0,#8]
> @@ -788,6 +778,6 @@
> stp x4,x5,[x1] // write result
>
> ret
> +ENDPROC(poly1305_emit_neon)
>
> Signed-off-by: Jason A. Donenfeld <Jason@xxxxxxxxx>
> Cc: Samuel Neves <sneves@xxxxxxxxx>
> Cc: Andy Lutomirski <luto@xxxxxxxxxx>
> Cc: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
> Cc: Jean-Philippe Aumasson <jeanphilippe.aumasson@xxxxxxxxx>
> Cc: Andy Polyakov <appro@xxxxxxxxxxx>
> Cc: Russell King <linux@xxxxxxxxxxxxxxx>
> Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> ---
> lib/zinc/Makefile | 8 +
> lib/zinc/poly1305/poly1305-arm-glue.h | 69 ++
> lib/zinc/poly1305/poly1305-arm.S | 1117 +++++++++++++++++++++++++
> lib/zinc/poly1305/poly1305-arm64.S | 822 ++++++++++++++++++
> 4 files changed, 2016 insertions(+)
> create mode 100644 lib/zinc/poly1305/poly1305-arm-glue.h
> create mode 100644 lib/zinc/poly1305/poly1305-arm.S
> create mode 100644 lib/zinc/poly1305/poly1305-arm64.S
>
> diff --git a/lib/zinc/Makefile b/lib/zinc/Makefile
> index d1e3892e06d9..f37df89a3f87 100644
> --- a/lib/zinc/Makefile
> +++ b/lib/zinc/Makefile
> @@ -25,6 +25,14 @@ endif
>
> ifeq ($(CONFIG_ZINC_POLY1305),y)
> zinc-y += poly1305/poly1305.o
> +ifeq ($(CONFIG_ZINC_ARCH_ARM),y)
> +zinc-y += poly1305/poly1305-arm.o
> +CFLAGS_poly1305.o += -include $(srctree)/$(src)/poly1305/poly1305-arm-glue.h
> +endif
> +ifeq ($(CONFIG_ZINC_ARCH_ARM64),y)
> +zinc-y += poly1305/poly1305-arm64.o
> +CFLAGS_poly1305.o += -include $(srctree)/$(src)/poly1305/poly1305-arm-glue.h
> +endif
> endif
>
I still don't like the GCC -includes, especially because these .h
files contain function and variable definitions so they are not
actually header files to begin with.
Also, you mentioned in the commit log that you got rid of defines and
made the code more modular, but as far as I can tell, libzinc is still
a single monolithic binary that is essentially always builtin once we
move random.c to it.
> zinc-y += main.o
> diff --git a/lib/zinc/poly1305/poly1305-arm-glue.h b/lib/zinc/poly1305/poly1305-arm-glue.h
> new file mode 100644
> index 000000000000..53f8fec7f858
> --- /dev/null
> +++ b/lib/zinc/poly1305/poly1305-arm-glue.h
> @@ -0,0 +1,69 @@
> +/* SPDX-License-Identifier: GPL-2.0
> + *
> + * Copyright (C) 2015-2018 Jason A. Donenfeld <Jason@xxxxxxxxx>. All Rights Reserved.
> + */
> +
> +#include <zinc/poly1305.h>
> +#include <asm/hwcap.h>
> +#include <asm/neon.h>
> +
> +asmlinkage void poly1305_init_arm(void *ctx, const u8 key[16]);
> +asmlinkage void poly1305_blocks_arm(void *ctx, const u8 *inp, const size_t len,
> + const u32 padbit);
> +asmlinkage void poly1305_emit_arm(void *ctx, u8 mac[16], const u32 nonce[4]);
> +#if IS_ENABLED(CONFIG_KERNEL_MODE_NEON) && \
> + (defined(CONFIG_64BIT) || __LINUX_ARM_ARCH__ >= 7)
> +#define ARM_USE_NEON
> +asmlinkage void poly1305_blocks_neon(void *ctx, const u8 *inp, const size_t len,
> + const u32 padbit);
> +asmlinkage void poly1305_emit_neon(void *ctx, u8 mac[16], const u32 nonce[4]);
> +#endif
> +
> +static bool poly1305_use_neon __ro_after_init;
> +
> +void __init poly1305_fpu_init(void)
> +{
> +#if defined(CONFIG_ARM64)
> + poly1305_use_neon = elf_hwcap & HWCAP_ASIMD;
> +#elif defined(CONFIG_ARM)
> + poly1305_use_neon = elf_hwcap & HWCAP_NEON;
> +#endif
> +}
> +
> +static inline bool poly1305_init_arch(void *ctx,
> + const u8 key[POLY1305_KEY_SIZE],
> + simd_context_t simd_context)
> +{
> + poly1305_init_arm(ctx, key);
> + return true;
> +}
> +
> +static inline bool poly1305_blocks_arch(void *ctx, const u8 *inp,
> + const size_t len, const u32 padbit,
> + simd_context_t simd_context)
> +{
> +#if defined(ARM_USE_NEON)
> + if (simd_context == HAVE_FULL_SIMD && poly1305_use_neon) {
> + poly1305_blocks_neon(ctx, inp, len, padbit);
> + return true;
> + }
> +#endif
> + poly1305_blocks_arm(ctx, inp, len, padbit);
> + return true;
> +}
> +
> +static inline bool poly1305_emit_arch(void *ctx, u8 mac[POLY1305_MAC_SIZE],
> + const u32 nonce[4],
> + simd_context_t simd_context)
> +{
> +#if defined(ARM_USE_NEON)
> + if (simd_context == HAVE_FULL_SIMD && poly1305_use_neon) {
> + poly1305_emit_neon(ctx, mac, nonce);
> + return true;
> + }
> +#endif
> + poly1305_emit_arm(ctx, mac, nonce);
> + return true;
> +}
> +
> +#define HAVE_POLY1305_ARCH_IMPLEMENTATION
We shouldn't #define HAVE_xxx constants in code but only in Kconfig.
> diff --git a/lib/zinc/poly1305/poly1305-arm.S b/lib/zinc/poly1305/poly1305-arm.S
> new file mode 100644
> index 000000000000..110f4317b5d7
> --- /dev/null
> +++ b/lib/zinc/poly1305/poly1305-arm.S
> @@ -0,0 +1,1117 @@
> +/* SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0
> + *
> + * Copyright (C) 2015-2018 Jason A. Donenfeld <Jason@xxxxxxxxx>. All Rights Reserved.
> + * Copyright (C) 2006-2017 CRYPTOGAMS by <appro@xxxxxxxxxxx>. All Rights Reserved.
> + *
> + * This is based in part on Andy Polyakov's implementation from CRYPTOGAMS.
> + */
> +
> +#include <linux/linkage.h>
> +
> +.text
> +#if defined(__thumb2__)
> +.syntax unified
> +.thumb
> +#else
> +.code 32
> +#endif
> +
> +.align 5
> +ENTRY(poly1305_init_arm)
> + stmdb sp!,{r4-r11}
> +
> + eor r3,r3,r3
> + cmp r1,#0
> + str r3,[r0,#0] @ zero hash value
> + str r3,[r0,#4]
> + str r3,[r0,#8]
> + str r3,[r0,#12]
> + str r3,[r0,#16]
> + str r3,[r0,#36] @ is_base2_26
> + add r0,r0,#20
> +
> +#ifdef __thumb2__
> + it eq
> +#endif
> + moveq r0,#0
> + beq .Lno_key
> +
> + ldrb r4,[r1,#0]
> + mov r10,#0x0fffffff
> + ldrb r5,[r1,#1]
> + and r3,r10,#-4 @ 0x0ffffffc
> + ldrb r6,[r1,#2]
> + ldrb r7,[r1,#3]
> + orr r4,r4,r5,lsl#8
> + ldrb r5,[r1,#4]
> + orr r4,r4,r6,lsl#16
> + ldrb r6,[r1,#5]
> + orr r4,r4,r7,lsl#24
> + ldrb r7,[r1,#6]
> + and r4,r4,r10
> +
> + ldrb r8,[r1,#7]
> + orr r5,r5,r6,lsl#8
> + ldrb r6,[r1,#8]
> + orr r5,r5,r7,lsl#16
> + ldrb r7,[r1,#9]
> + orr r5,r5,r8,lsl#24
> + ldrb r8,[r1,#10]
> + and r5,r5,r3
> +
> + ldrb r9,[r1,#11]
> + orr r6,r6,r7,lsl#8
> + ldrb r7,[r1,#12]
> + orr r6,r6,r8,lsl#16
> + ldrb r8,[r1,#13]
> + orr r6,r6,r9,lsl#24
> + ldrb r9,[r1,#14]
> + and r6,r6,r3
> +
> + ldrb r10,[r1,#15]
> + orr r7,r7,r8,lsl#8
> + str r4,[r0,#0]
> + orr r7,r7,r9,lsl#16
> + str r5,[r0,#4]
> + orr r7,r7,r10,lsl#24
> + str r6,[r0,#8]
> + and r7,r7,r3
> + str r7,[r0,#12]
> +.Lno_key:
> + ldmia sp!,{r4-r11}
> +#if __LINUX_ARM_ARCH__ >= 5
> + bx lr @ bx lr
> +#else
> + tst lr,#1
> + moveq pc,lr @ be binary compatible with V4, yet
> + .word 0xe12fff1e @ interoperable with Thumb ISA:-)
> +#endif
> +ENDPROC(poly1305_init_arm)
> +
> +.align 5
> +ENTRY(poly1305_blocks_arm)
> +.Lpoly1305_blocks_arm:
> + stmdb sp!,{r3-r11,lr}
> +
> + ands r2,r2,#-16
> + beq .Lno_data
> +
> + cmp r3,#0
> + add r2,r2,r1 @ end pointer
> + sub sp,sp,#32
> +
> + ldmia r0,{r4-r12} @ load context
> +
> + str r0,[sp,#12] @ offload stuff
> + mov lr,r1
> + str r2,[sp,#16]
> + str r10,[sp,#20]
> + str r11,[sp,#24]
> + str r12,[sp,#28]
> + b .Loop
> +
> +.Loop:
> +#if __LINUX_ARM_ARCH__ < 7
> + ldrb r0,[lr],#16 @ load input
> +#ifdef __thumb2__
> + it hi
> +#endif
> + addhi r8,r8,#1 @ 1<<128
> + ldrb r1,[lr,#-15]
> + ldrb r2,[lr,#-14]
> + ldrb r3,[lr,#-13]
> + orr r1,r0,r1,lsl#8
> + ldrb r0,[lr,#-12]
> + orr r2,r1,r2,lsl#16
> + ldrb r1,[lr,#-11]
> + orr r3,r2,r3,lsl#24
> + ldrb r2,[lr,#-10]
> + adds r4,r4,r3 @ accumulate input
> +
> + ldrb r3,[lr,#-9]
> + orr r1,r0,r1,lsl#8
> + ldrb r0,[lr,#-8]
> + orr r2,r1,r2,lsl#16
> + ldrb r1,[lr,#-7]
> + orr r3,r2,r3,lsl#24
> + ldrb r2,[lr,#-6]
> + adcs r5,r5,r3
> +
> + ldrb r3,[lr,#-5]
> + orr r1,r0,r1,lsl#8
> + ldrb r0,[lr,#-4]
> + orr r2,r1,r2,lsl#16
> + ldrb r1,[lr,#-3]
> + orr r3,r2,r3,lsl#24
> + ldrb r2,[lr,#-2]
> + adcs r6,r6,r3
> +
> + ldrb r3,[lr,#-1]
> + orr r1,r0,r1,lsl#8
> + str lr,[sp,#8] @ offload input pointer
> + orr r2,r1,r2,lsl#16
> + add r10,r10,r10,lsr#2
> + orr r3,r2,r3,lsl#24
> +#else
> + ldr r0,[lr],#16 @ load input
> +#ifdef __thumb2__
> + it hi
> +#endif
> + addhi r8,r8,#1 @ padbit
> + ldr r1,[lr,#-12]
> + ldr r2,[lr,#-8]
> + ldr r3,[lr,#-4]
> +#ifdef __ARMEB__
> + rev r0,r0
> + rev r1,r1
> + rev r2,r2
> + rev r3,r3
> +#endif
> + adds r4,r4,r0 @ accumulate input
> + str lr,[sp,#8] @ offload input pointer
> + adcs r5,r5,r1
> + add r10,r10,r10,lsr#2
> + adcs r6,r6,r2
> +#endif
> + add r11,r11,r11,lsr#2
> + adcs r7,r7,r3
> + add r12,r12,r12,lsr#2
> +
> + umull r2,r3,r5,r9
> + adc r8,r8,#0
> + umull r0,r1,r4,r9
> + umlal r2,r3,r8,r10
> + umlal r0,r1,r7,r10
> + ldr r10,[sp,#20] @ reload r10
> + umlal r2,r3,r6,r12
> + umlal r0,r1,r5,r12
> + umlal r2,r3,r7,r11
> + umlal r0,r1,r6,r11
> + umlal r2,r3,r4,r10
> + str r0,[sp,#0] @ future r4
> + mul r0,r11,r8
> + ldr r11,[sp,#24] @ reload r11
> + adds r2,r2,r1 @ d1+=d0>>32
> + eor r1,r1,r1
> + adc lr,r3,#0 @ future r6
> + str r2,[sp,#4] @ future r5
> +
> + mul r2,r12,r8
> + eor r3,r3,r3
> + umlal r0,r1,r7,r12
> + ldr r12,[sp,#28] @ reload r12
> + umlal r2,r3,r7,r9
> + umlal r0,r1,r6,r9
> + umlal r2,r3,r6,r10
> + umlal r0,r1,r5,r10
> + umlal r2,r3,r5,r11
> + umlal r0,r1,r4,r11
> + umlal r2,r3,r4,r12
> + ldr r4,[sp,#0]
> + mul r8,r9,r8
> + ldr r5,[sp,#4]
> +
> + adds r6,lr,r0 @ d2+=d1>>32
> + ldr lr,[sp,#8] @ reload input pointer
> + adc r1,r1,#0
> + adds r7,r2,r1 @ d3+=d2>>32
> + ldr r0,[sp,#16] @ reload end pointer
> + adc r3,r3,#0
> + add r8,r8,r3 @ h4+=d3>>32
> +
> + and r1,r8,#-4
> + and r8,r8,#3
> + add r1,r1,r1,lsr#2 @ *=5
> + adds r4,r4,r1
> + adcs r5,r5,#0
> + adcs r6,r6,#0
> + adcs r7,r7,#0
> + adc r8,r8,#0
> +
> + cmp r0,lr @ done yet?
> + bhi .Loop
> +
> + ldr r0,[sp,#12]
> + add sp,sp,#32
> + stmia r0,{r4-r8} @ store the result
> +
> +.Lno_data:
> +#if __LINUX_ARM_ARCH__ >= 5
> + ldmia sp!,{r3-r11,pc}
> +#else
> + ldmia sp!,{r3-r11,lr}
> + tst lr,#1
> + moveq pc,lr @ be binary compatible with V4, yet
> + .word 0xe12fff1e @ interoperable with Thumb ISA:-)
> +#endif
> +ENDPROC(poly1305_blocks_arm)
> +
> +.align 5
> +ENTRY(poly1305_emit_arm)
> + stmdb sp!,{r4-r11}
> +.Lpoly1305_emit_enter:
> + ldmia r0,{r3-r7}
> + adds r8,r3,#5 @ compare to modulus
> + adcs r9,r4,#0
> + adcs r10,r5,#0
> + adcs r11,r6,#0
> + adc r7,r7,#0
> + tst r7,#4 @ did it carry/borrow?
> +
> +#ifdef __thumb2__
> + it ne
> +#endif
> + movne r3,r8
> + ldr r8,[r2,#0]
> +#ifdef __thumb2__
> + it ne
> +#endif
> + movne r4,r9
> + ldr r9,[r2,#4]
> +#ifdef __thumb2__
> + it ne
> +#endif
> + movne r5,r10
> + ldr r10,[r2,#8]
> +#ifdef __thumb2__
> + it ne
> +#endif
> + movne r6,r11
> + ldr r11,[r2,#12]
> +
> + adds r3,r3,r8
> + adcs r4,r4,r9
> + adcs r5,r5,r10
> + adc r6,r6,r11
> +
> +#if __LINUX_ARM_ARCH__ >= 7
> +#ifdef __ARMEB__
> + rev r3,r3
> + rev r4,r4
> + rev r5,r5
> + rev r6,r6
> +#endif
> + str r3,[r1,#0]
> + str r4,[r1,#4]
> + str r5,[r1,#8]
> + str r6,[r1,#12]
> +#else
> + strb r3,[r1,#0]
> + mov r3,r3,lsr#8
> + strb r4,[r1,#4]
> + mov r4,r4,lsr#8
> + strb r5,[r1,#8]
> + mov r5,r5,lsr#8
> + strb r6,[r1,#12]
> + mov r6,r6,lsr#8
> +
> + strb r3,[r1,#1]
> + mov r3,r3,lsr#8
> + strb r4,[r1,#5]
> + mov r4,r4,lsr#8
> + strb r5,[r1,#9]
> + mov r5,r5,lsr#8
> + strb r6,[r1,#13]
> + mov r6,r6,lsr#8
> +
> + strb r3,[r1,#2]
> + mov r3,r3,lsr#8
> + strb r4,[r1,#6]
> + mov r4,r4,lsr#8
> + strb r5,[r1,#10]
> + mov r5,r5,lsr#8
> + strb r6,[r1,#14]
> + mov r6,r6,lsr#8
> +
> + strb r3,[r1,#3]
> + strb r4,[r1,#7]
> + strb r5,[r1,#11]
> + strb r6,[r1,#15]
> +#endif
> + ldmia sp!,{r4-r11}
> +#if __LINUX_ARM_ARCH__ >= 5
> + bx lr @ bx lr
> +#else
> + tst lr,#1
> + moveq pc,lr @ be binary compatible with V4, yet
> + .word 0xe12fff1e @ interoperable with Thumb ISA:-)
> +#endif
> +ENDPROC(poly1305_emit_arm)
> +
> +
> +#if __LINUX_ARM_ARCH__ >= 7
> +.fpu neon
> +
> +.align 5
> +ENTRY(poly1305_init_neon)
> +.Lpoly1305_init_neon:
> + ldr r4,[r0,#20] @ load key base 2^32
> + ldr r5,[r0,#24]
> + ldr r6,[r0,#28]
> + ldr r7,[r0,#32]
> +
> + and r2,r4,#0x03ffffff @ base 2^32 -> base 2^26
> + mov r3,r4,lsr#26
> + mov r4,r5,lsr#20
> + orr r3,r3,r5,lsl#6
> + mov r5,r6,lsr#14
> + orr r4,r4,r6,lsl#12
> + mov r6,r7,lsr#8
> + orr r5,r5,r7,lsl#18
> + and r3,r3,#0x03ffffff
> + and r4,r4,#0x03ffffff
> + and r5,r5,#0x03ffffff
> +
> + vdup.32 d0,r2 @ r^1 in both lanes
> + add r2,r3,r3,lsl#2 @ *5
> + vdup.32 d1,r3
> + add r3,r4,r4,lsl#2
> + vdup.32 d2,r2
> + vdup.32 d3,r4
> + add r4,r5,r5,lsl#2
> + vdup.32 d4,r3
> + vdup.32 d5,r5
> + add r5,r6,r6,lsl#2
> + vdup.32 d6,r4
> + vdup.32 d7,r6
> + vdup.32 d8,r5
> +
> + mov r5,#2 @ counter
> +
> +.Lsquare_neon:
> + @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
> + @ d0 = h0*r0 + h4*5*r1 + h3*5*r2 + h2*5*r3 + h1*5*r4
> + @ d1 = h1*r0 + h0*r1 + h4*5*r2 + h3*5*r3 + h2*5*r4
> + @ d2 = h2*r0 + h1*r1 + h0*r2 + h4*5*r3 + h3*5*r4
> + @ d3 = h3*r0 + h2*r1 + h1*r2 + h0*r3 + h4*5*r4
> + @ d4 = h4*r0 + h3*r1 + h2*r2 + h1*r3 + h0*r4
> +
> + vmull.u32 q5,d0,d0[1]
> + vmull.u32 q6,d1,d0[1]
> + vmull.u32 q7,d3,d0[1]
> + vmull.u32 q8,d5,d0[1]
> + vmull.u32 q9,d7,d0[1]
> +
> + vmlal.u32 q5,d7,d2[1]
> + vmlal.u32 q6,d0,d1[1]
> + vmlal.u32 q7,d1,d1[1]
> + vmlal.u32 q8,d3,d1[1]
> + vmlal.u32 q9,d5,d1[1]
> +
> + vmlal.u32 q5,d5,d4[1]
> + vmlal.u32 q6,d7,d4[1]
> + vmlal.u32 q8,d1,d3[1]
> + vmlal.u32 q7,d0,d3[1]
> + vmlal.u32 q9,d3,d3[1]
> +
> + vmlal.u32 q5,d3,d6[1]
> + vmlal.u32 q8,d0,d5[1]
> + vmlal.u32 q6,d5,d6[1]
> + vmlal.u32 q7,d7,d6[1]
> + vmlal.u32 q9,d1,d5[1]
> +
> + vmlal.u32 q8,d7,d8[1]
> + vmlal.u32 q5,d1,d8[1]
> + vmlal.u32 q6,d3,d8[1]
> + vmlal.u32 q7,d5,d8[1]
> + vmlal.u32 q9,d0,d7[1]
> +
> + @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
> + @ lazy reduction as discussed in "NEON crypto" by D.J. Bernstein
> + @ and P. Schwabe
> + @
> + @ H0>>+H1>>+H2>>+H3>>+H4
> + @ H3>>+H4>>*5+H0>>+H1
> + @
> + @ Trivia.
> + @
> + @ Result of multiplication of n-bit number by m-bit number is
> + @ n+m bits wide. However! Even though 2^n is a n+1-bit number,
> + @ m-bit number multiplied by 2^n is still n+m bits wide.
> + @
> + @ Sum of two n-bit numbers is n+1 bits wide, sum of three - n+2,
> + @ and so is sum of four. Sum of 2^m n-m-bit numbers and n-bit
> + @ one is n+1 bits wide.
> + @
> + @ >>+ denotes Hnext += Hn>>26, Hn &= 0x3ffffff. This means that
> + @ H0, H2, H3 are guaranteed to be 26 bits wide, while H1 and H4
> + @ can be 27. However! In cases when their width exceeds 26 bits
> + @ they are limited by 2^26+2^6. This in turn means that *sum*
> + @ of the products with these values can still be viewed as sum
> + @ of 52-bit numbers as long as the amount of addends is not a
> + @ power of 2. For example,
> + @
> + @ H4 = H4*R0 + H3*R1 + H2*R2 + H1*R3 + H0 * R4,
> + @
> + @ which can't be larger than 5 * (2^26 + 2^6) * (2^26 + 2^6), or
> + @ 5 * (2^52 + 2*2^32 + 2^12), which in turn is smaller than
> + @ 8 * (2^52) or 2^55. However, the value is then multiplied by
> + @ by 5, so we should be looking at 5 * 5 * (2^52 + 2^33 + 2^12),
> + @ which is less than 32 * (2^52) or 2^57. And when processing
> + @ data we are looking at triple as many addends...
> + @
> + @ In key setup procedure pre-reduced H0 is limited by 5*4+1 and
> + @ 5*H4 - by 5*5 52-bit addends, or 57 bits. But when hashing the
> + @ input H0 is limited by (5*4+1)*3 addends, or 58 bits, while
> + @ 5*H4 by 5*5*3, or 59[!] bits. How is this relevant? vmlal.u32
> + @ instruction accepts 2x32-bit input and writes 2x64-bit result.
> + @ This means that result of reduction have to be compressed upon
> + @ loop wrap-around. This can be done in the process of reduction
> + @ to minimize amount of instructions [as well as amount of
> + @ 128-bit instructions, which benefits low-end processors], but
> + @ one has to watch for H2 (which is narrower than H0) and 5*H4
> + @ not being wider than 58 bits, so that result of right shift
> + @ by 26 bits fits in 32 bits. This is also useful on x86,
> + @ because it allows to use paddd in place for paddq, which
> + @ benefits Atom, where paddq is ridiculously slow.
> +
> + vshr.u64 q15,q8,#26
> + vmovn.i64 d16,q8
> + vshr.u64 q4,q5,#26
> + vmovn.i64 d10,q5
> + vadd.i64 q9,q9,q15 @ h3 -> h4
> + vbic.i32 d16,#0xfc000000 @ &=0x03ffffff
> + vadd.i64 q6,q6,q4 @ h0 -> h1
> + vbic.i32 d10,#0xfc000000
> +
> + vshrn.u64 d30,q9,#26
> + vmovn.i64 d18,q9
> + vshr.u64 q4,q6,#26
> + vmovn.i64 d12,q6
> + vadd.i64 q7,q7,q4 @ h1 -> h2
> + vbic.i32 d18,#0xfc000000
> + vbic.i32 d12,#0xfc000000
> +
> + vadd.i32 d10,d10,d30
> + vshl.u32 d30,d30,#2
> + vshrn.u64 d8,q7,#26
> + vmovn.i64 d14,q7
> + vadd.i32 d10,d10,d30 @ h4 -> h0
> + vadd.i32 d16,d16,d8 @ h2 -> h3
> + vbic.i32 d14,#0xfc000000
> +
> + vshr.u32 d30,d10,#26
> + vbic.i32 d10,#0xfc000000
> + vshr.u32 d8,d16,#26
> + vbic.i32 d16,#0xfc000000
> + vadd.i32 d12,d12,d30 @ h0 -> h1
> + vadd.i32 d18,d18,d8 @ h3 -> h4
> +
> + subs r5,r5,#1
> + beq .Lsquare_break_neon
> +
> + add r6,r0,#(48+0*9*4)
> + add r7,r0,#(48+1*9*4)
> +
> + vtrn.32 d0,d10 @ r^2:r^1
> + vtrn.32 d3,d14
> + vtrn.32 d5,d16
> + vtrn.32 d1,d12
> + vtrn.32 d7,d18
> +
> + vshl.u32 d4,d3,#2 @ *5
> + vshl.u32 d6,d5,#2
> + vshl.u32 d2,d1,#2
> + vshl.u32 d8,d7,#2
> + vadd.i32 d4,d4,d3
> + vadd.i32 d2,d2,d1
> + vadd.i32 d6,d6,d5
> + vadd.i32 d8,d8,d7
> +
> + vst4.32 {d0[0],d1[0],d2[0],d3[0]},[r6]!
> + vst4.32 {d0[1],d1[1],d2[1],d3[1]},[r7]!
> + vst4.32 {d4[0],d5[0],d6[0],d7[0]},[r6]!
> + vst4.32 {d4[1],d5[1],d6[1],d7[1]},[r7]!
> + vst1.32 {d8[0]},[r6,:32]
> + vst1.32 {d8[1]},[r7,:32]
> +
> + b .Lsquare_neon
> +
> +.align 4
> +.Lsquare_break_neon:
> + add r6,r0,#(48+2*4*9)
> + add r7,r0,#(48+3*4*9)
> +
> + vmov d0,d10 @ r^4:r^3
> + vshl.u32 d2,d12,#2 @ *5
> + vmov d1,d12
> + vshl.u32 d4,d14,#2
> + vmov d3,d14
> + vshl.u32 d6,d16,#2
> + vmov d5,d16
> + vshl.u32 d8,d18,#2
> + vmov d7,d18
> + vadd.i32 d2,d2,d12
> + vadd.i32 d4,d4,d14
> + vadd.i32 d6,d6,d16
> + vadd.i32 d8,d8,d18
> +
> + vst4.32 {d0[0],d1[0],d2[0],d3[0]},[r6]!
> + vst4.32 {d0[1],d1[1],d2[1],d3[1]},[r7]!
> + vst4.32 {d4[0],d5[0],d6[0],d7[0]},[r6]!
> + vst4.32 {d4[1],d5[1],d6[1],d7[1]},[r7]!
> + vst1.32 {d8[0]},[r6]
> + vst1.32 {d8[1]},[r7]
> +
> + bx lr @ bx lr
> +ENDPROC(poly1305_init_neon)
> +
> +.align 5
> +ENTRY(poly1305_blocks_neon)
> + ldr ip,[r0,#36] @ is_base2_26
> + ands r2,r2,#-16
> + beq .Lno_data_neon
> +
> + cmp r2,#64
> + bhs .Lenter_neon
> + tst ip,ip @ is_base2_26?
> + beq .Lpoly1305_blocks_arm
> +
> +.Lenter_neon:
> + stmdb sp!,{r4-r7}
> + vstmdb sp!,{d8-d15} @ ABI specification says so
> +
> + tst ip,ip @ is_base2_26?
> + bne .Lbase2_26_neon
> +
> + stmdb sp!,{r1-r3,lr}
> + bl .Lpoly1305_init_neon
> +
> + ldr r4,[r0,#0] @ load hash value base 2^32
> + ldr r5,[r0,#4]
> + ldr r6,[r0,#8]
> + ldr r7,[r0,#12]
> + ldr ip,[r0,#16]
> +
> + and r2,r4,#0x03ffffff @ base 2^32 -> base 2^26
> + mov r3,r4,lsr#26
> + veor d10,d10,d10
> + mov r4,r5,lsr#20
> + orr r3,r3,r5,lsl#6
> + veor d12,d12,d12
> + mov r5,r6,lsr#14
> + orr r4,r4,r6,lsl#12
> + veor d14,d14,d14
> + mov r6,r7,lsr#8
> + orr r5,r5,r7,lsl#18
> + veor d16,d16,d16
> + and r3,r3,#0x03ffffff
> + orr r6,r6,ip,lsl#24
> + veor d18,d18,d18
> + and r4,r4,#0x03ffffff
> + mov r1,#1
> + and r5,r5,#0x03ffffff
> + str r1,[r0,#36] @ is_base2_26
> +
> + vmov.32 d10[0],r2
> + vmov.32 d12[0],r3
> + vmov.32 d14[0],r4
> + vmov.32 d16[0],r5
> + vmov.32 d18[0],r6
> + adr r5,.Lzeros
> +
> + ldmia sp!,{r1-r3,lr}
> + b .Lbase2_32_neon
> +
> +.align 4
> +.Lbase2_26_neon:
> + @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
> + @ load hash value
> +
> + veor d10,d10,d10
> + veor d12,d12,d12
> + veor d14,d14,d14
> + veor d16,d16,d16
> + veor d18,d18,d18
> + vld4.32 {d10[0],d12[0],d14[0],d16[0]},[r0]!
> + adr r5,.Lzeros
> + vld1.32 {d18[0]},[r0]
> + sub r0,r0,#16 @ rewind
> +
> +.Lbase2_32_neon:
> + add r4,r1,#32
> + mov r3,r3,lsl#24
> + tst r2,#31
> + beq .Leven
> +
> + vld4.32 {d20[0],d22[0],d24[0],d26[0]},[r1]!
> + vmov.32 d28[0],r3
> + sub r2,r2,#16
> + add r4,r1,#32
> +
> +#ifdef __ARMEB__
> + vrev32.8 q10,q10
> + vrev32.8 q13,q13
> + vrev32.8 q11,q11
> + vrev32.8 q12,q12
> +#endif
> + vsri.u32 d28,d26,#8 @ base 2^32 -> base 2^26
> + vshl.u32 d26,d26,#18
> +
> + vsri.u32 d26,d24,#14
> + vshl.u32 d24,d24,#12
> + vadd.i32 d29,d28,d18 @ add hash value and move to #hi
> +
> + vbic.i32 d26,#0xfc000000
> + vsri.u32 d24,d22,#20
> + vshl.u32 d22,d22,#6
> +
> + vbic.i32 d24,#0xfc000000
> + vsri.u32 d22,d20,#26
> + vadd.i32 d27,d26,d16
> +
> + vbic.i32 d20,#0xfc000000
> + vbic.i32 d22,#0xfc000000
> + vadd.i32 d25,d24,d14
> +
> + vadd.i32 d21,d20,d10
> + vadd.i32 d23,d22,d12
> +
> + mov r7,r5
> + add r6,r0,#48
> +
> + cmp r2,r2
> + b .Long_tail
> +
> +.align 4
> +.Leven:
> + subs r2,r2,#64
> + it lo
> + movlo r4,r5
> +
> + vmov.i32 q14,#1<<24 @ padbit, yes, always
> + vld4.32 {d20,d22,d24,d26},[r1] @ inp[0:1]
> + add r1,r1,#64
> + vld4.32 {d21,d23,d25,d27},[r4] @ inp[2:3] (or 0)
> + add r4,r4,#64
> + itt hi
> + addhi r7,r0,#(48+1*9*4)
> + addhi r6,r0,#(48+3*9*4)
> +
> +#ifdef __ARMEB__
> + vrev32.8 q10,q10
> + vrev32.8 q13,q13
> + vrev32.8 q11,q11
> + vrev32.8 q12,q12
> +#endif
> + vsri.u32 q14,q13,#8 @ base 2^32 -> base 2^26
> + vshl.u32 q13,q13,#18
> +
> + vsri.u32 q13,q12,#14
> + vshl.u32 q12,q12,#12
> +
> + vbic.i32 q13,#0xfc000000
> + vsri.u32 q12,q11,#20
> + vshl.u32 q11,q11,#6
> +
> + vbic.i32 q12,#0xfc000000
> + vsri.u32 q11,q10,#26
> +
> + vbic.i32 q10,#0xfc000000
> + vbic.i32 q11,#0xfc000000
> +
> + bls .Lskip_loop
> +
> + vld4.32 {d0[1],d1[1],d2[1],d3[1]},[r7]! @ load r^2
> + vld4.32 {d0[0],d1[0],d2[0],d3[0]},[r6]! @ load r^4
> + vld4.32 {d4[1],d5[1],d6[1],d7[1]},[r7]!
> + vld4.32 {d4[0],d5[0],d6[0],d7[0]},[r6]!
> + b .Loop_neon
> +
> +.align 5
> +.Loop_neon:
> + @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
> + @ ((inp[0]*r^4+inp[2]*r^2+inp[4])*r^4+inp[6]*r^2
> + @ ((inp[1]*r^4+inp[3]*r^2+inp[5])*r^3+inp[7]*r
> + @ ___________________/
> + @ ((inp[0]*r^4+inp[2]*r^2+inp[4])*r^4+inp[6]*r^2+inp[8])*r^2
> + @ ((inp[1]*r^4+inp[3]*r^2+inp[5])*r^4+inp[7]*r^2+inp[9])*r
> + @ ___________________/ ____________________/
> + @
> + @ Note that we start with inp[2:3]*r^2. This is because it
> + @ doesn't depend on reduction in previous iteration.
> + @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
> + @ d4 = h4*r0 + h3*r1 + h2*r2 + h1*r3 + h0*r4
> + @ d3 = h3*r0 + h2*r1 + h1*r2 + h0*r3 + h4*5*r4
> + @ d2 = h2*r0 + h1*r1 + h0*r2 + h4*5*r3 + h3*5*r4
> + @ d1 = h1*r0 + h0*r1 + h4*5*r2 + h3*5*r3 + h2*5*r4
> + @ d0 = h0*r0 + h4*5*r1 + h3*5*r2 + h2*5*r3 + h1*5*r4
> +
> + @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
> + @ inp[2:3]*r^2
> +
> + vadd.i32 d24,d24,d14 @ accumulate inp[0:1]
> + vmull.u32 q7,d25,d0[1]
> + vadd.i32 d20,d20,d10
> + vmull.u32 q5,d21,d0[1]
> + vadd.i32 d26,d26,d16
> + vmull.u32 q8,d27,d0[1]
> + vmlal.u32 q7,d23,d1[1]
> + vadd.i32 d22,d22,d12
> + vmull.u32 q6,d23,d0[1]
> +
> + vadd.i32 d28,d28,d18
> + vmull.u32 q9,d29,d0[1]
> + subs r2,r2,#64
> + vmlal.u32 q5,d29,d2[1]
> + it lo
> + movlo r4,r5
> + vmlal.u32 q8,d25,d1[1]
> + vld1.32 d8[1],[r7,:32]
> + vmlal.u32 q6,d21,d1[1]
> + vmlal.u32 q9,d27,d1[1]
> +
> + vmlal.u32 q5,d27,d4[1]
> + vmlal.u32 q8,d23,d3[1]
> + vmlal.u32 q9,d25,d3[1]
> + vmlal.u32 q6,d29,d4[1]
> + vmlal.u32 q7,d21,d3[1]
> +
> + vmlal.u32 q8,d21,d5[1]
> + vmlal.u32 q5,d25,d6[1]
> + vmlal.u32 q9,d23,d5[1]
> + vmlal.u32 q6,d27,d6[1]
> + vmlal.u32 q7,d29,d6[1]
> +
> + vmlal.u32 q8,d29,d8[1]
> + vmlal.u32 q5,d23,d8[1]
> + vmlal.u32 q9,d21,d7[1]
> + vmlal.u32 q6,d25,d8[1]
> + vmlal.u32 q7,d27,d8[1]
> +
> + vld4.32 {d21,d23,d25,d27},[r4] @ inp[2:3] (or 0)
> + add r4,r4,#64
> +
> + @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
> + @ (hash+inp[0:1])*r^4 and accumulate
> +
> + vmlal.u32 q8,d26,d0[0]
> + vmlal.u32 q5,d20,d0[0]
> + vmlal.u32 q9,d28,d0[0]
> + vmlal.u32 q6,d22,d0[0]
> + vmlal.u32 q7,d24,d0[0]
> + vld1.32 d8[0],[r6,:32]
> +
> + vmlal.u32 q8,d24,d1[0]
> + vmlal.u32 q5,d28,d2[0]
> + vmlal.u32 q9,d26,d1[0]
> + vmlal.u32 q6,d20,d1[0]
> + vmlal.u32 q7,d22,d1[0]
> +
> + vmlal.u32 q8,d22,d3[0]
> + vmlal.u32 q5,d26,d4[0]
> + vmlal.u32 q9,d24,d3[0]
> + vmlal.u32 q6,d28,d4[0]
> + vmlal.u32 q7,d20,d3[0]
> +
> + vmlal.u32 q8,d20,d5[0]
> + vmlal.u32 q5,d24,d6[0]
> + vmlal.u32 q9,d22,d5[0]
> + vmlal.u32 q6,d26,d6[0]
> + vmlal.u32 q8,d28,d8[0]
> +
> + vmlal.u32 q7,d28,d6[0]
> + vmlal.u32 q5,d22,d8[0]
> + vmlal.u32 q9,d20,d7[0]
> + vmov.i32 q14,#1<<24 @ padbit, yes, always
> + vmlal.u32 q6,d24,d8[0]
> + vmlal.u32 q7,d26,d8[0]
> +
> + vld4.32 {d20,d22,d24,d26},[r1] @ inp[0:1]
> + add r1,r1,#64
> +#ifdef __ARMEB__
> + vrev32.8 q10,q10
> + vrev32.8 q11,q11
> + vrev32.8 q12,q12
> + vrev32.8 q13,q13
> +#endif
> +
> + @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
> + @ lazy reduction interleaved with base 2^32 -> base 2^26 of
> + @ inp[0:3] previously loaded to q10-q13 and smashed to q10-q14.
> +
> + vshr.u64 q15,q8,#26
> + vmovn.i64 d16,q8
> + vshr.u64 q4,q5,#26
> + vmovn.i64 d10,q5
> + vadd.i64 q9,q9,q15 @ h3 -> h4
> + vbic.i32 d16,#0xfc000000
> + vsri.u32 q14,q13,#8 @ base 2^32 -> base 2^26
> + vadd.i64 q6,q6,q4 @ h0 -> h1
> + vshl.u32 q13,q13,#18
> + vbic.i32 d10,#0xfc000000
> +
> + vshrn.u64 d30,q9,#26
> + vmovn.i64 d18,q9
> + vshr.u64 q4,q6,#26
> + vmovn.i64 d12,q6
> + vadd.i64 q7,q7,q4 @ h1 -> h2
> + vsri.u32 q13,q12,#14
> + vbic.i32 d18,#0xfc000000
> + vshl.u32 q12,q12,#12
> + vbic.i32 d12,#0xfc000000
> +
> + vadd.i32 d10,d10,d30
> + vshl.u32 d30,d30,#2
> + vbic.i32 q13,#0xfc000000
> + vshrn.u64 d8,q7,#26
> + vmovn.i64 d14,q7
> + vaddl.u32 q5,d10,d30 @ h4 -> h0 [widen for a sec]
> + vsri.u32 q12,q11,#20
> + vadd.i32 d16,d16,d8 @ h2 -> h3
> + vshl.u32 q11,q11,#6
> + vbic.i32 d14,#0xfc000000
> + vbic.i32 q12,#0xfc000000
> +
> + vshrn.u64 d30,q5,#26 @ re-narrow
> + vmovn.i64 d10,q5
> + vsri.u32 q11,q10,#26
> + vbic.i32 q10,#0xfc000000
> + vshr.u32 d8,d16,#26
> + vbic.i32 d16,#0xfc000000
> + vbic.i32 d10,#0xfc000000
> + vadd.i32 d12,d12,d30 @ h0 -> h1
> + vadd.i32 d18,d18,d8 @ h3 -> h4
> + vbic.i32 q11,#0xfc000000
> +
> + bhi .Loop_neon
> +
> +.Lskip_loop:
> + @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
> + @ multiply (inp[0:1]+hash) or inp[2:3] by r^2:r^1
> +
> + add r7,r0,#(48+0*9*4)
> + add r6,r0,#(48+1*9*4)
> + adds r2,r2,#32
> + it ne
> + movne r2,#0
> + bne .Long_tail
> +
> + vadd.i32 d25,d24,d14 @ add hash value and move to #hi
> + vadd.i32 d21,d20,d10
> + vadd.i32 d27,d26,d16
> + vadd.i32 d23,d22,d12
> + vadd.i32 d29,d28,d18
> +
> +.Long_tail:
> + vld4.32 {d0[1],d1[1],d2[1],d3[1]},[r7]! @ load r^1
> + vld4.32 {d0[0],d1[0],d2[0],d3[0]},[r6]! @ load r^2
> +
> + vadd.i32 d24,d24,d14 @ can be redundant
> + vmull.u32 q7,d25,d0
> + vadd.i32 d20,d20,d10
> + vmull.u32 q5,d21,d0
> + vadd.i32 d26,d26,d16
> + vmull.u32 q8,d27,d0
> + vadd.i32 d22,d22,d12
> + vmull.u32 q6,d23,d0
> + vadd.i32 d28,d28,d18
> + vmull.u32 q9,d29,d0
> +
> + vmlal.u32 q5,d29,d2
> + vld4.32 {d4[1],d5[1],d6[1],d7[1]},[r7]!
> + vmlal.u32 q8,d25,d1
> + vld4.32 {d4[0],d5[0],d6[0],d7[0]},[r6]!
> + vmlal.u32 q6,d21,d1
> + vmlal.u32 q9,d27,d1
> + vmlal.u32 q7,d23,d1
> +
> + vmlal.u32 q8,d23,d3
> + vld1.32 d8[1],[r7,:32]
> + vmlal.u32 q5,d27,d4
> + vld1.32 d8[0],[r6,:32]
> + vmlal.u32 q9,d25,d3
> + vmlal.u32 q6,d29,d4
> + vmlal.u32 q7,d21,d3
> +
> + vmlal.u32 q8,d21,d5
> + it ne
> + addne r7,r0,#(48+2*9*4)
> + vmlal.u32 q5,d25,d6
> + it ne
> + addne r6,r0,#(48+3*9*4)
> + vmlal.u32 q9,d23,d5
> + vmlal.u32 q6,d27,d6
> + vmlal.u32 q7,d29,d6
> +
> + vmlal.u32 q8,d29,d8
> + vorn q0,q0,q0 @ all-ones, can be redundant
> + vmlal.u32 q5,d23,d8
> + vshr.u64 q0,q0,#38
> + vmlal.u32 q9,d21,d7
> + vmlal.u32 q6,d25,d8
> + vmlal.u32 q7,d27,d8
> +
> + beq .Lshort_tail
> +
> + @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
> + @ (hash+inp[0:1])*r^4:r^3 and accumulate
> +
> + vld4.32 {d0[1],d1[1],d2[1],d3[1]},[r7]! @ load r^3
> + vld4.32 {d0[0],d1[0],d2[0],d3[0]},[r6]! @ load r^4
> +
> + vmlal.u32 q7,d24,d0
> + vmlal.u32 q5,d20,d0
> + vmlal.u32 q8,d26,d0
> + vmlal.u32 q6,d22,d0
> + vmlal.u32 q9,d28,d0
> +
> + vmlal.u32 q5,d28,d2
> + vld4.32 {d4[1],d5[1],d6[1],d7[1]},[r7]!
> + vmlal.u32 q8,d24,d1
> + vld4.32 {d4[0],d5[0],d6[0],d7[0]},[r6]!
> + vmlal.u32 q6,d20,d1
> + vmlal.u32 q9,d26,d1
> + vmlal.u32 q7,d22,d1
> +
> + vmlal.u32 q8,d22,d3
> + vld1.32 d8[1],[r7,:32]
> + vmlal.u32 q5,d26,d4
> + vld1.32 d8[0],[r6,:32]
> + vmlal.u32 q9,d24,d3
> + vmlal.u32 q6,d28,d4
> + vmlal.u32 q7,d20,d3
> +
> + vmlal.u32 q8,d20,d5
> + vmlal.u32 q5,d24,d6
> + vmlal.u32 q9,d22,d5
> + vmlal.u32 q6,d26,d6
> + vmlal.u32 q7,d28,d6
> +
> + vmlal.u32 q8,d28,d8
> + vorn q0,q0,q0 @ all-ones
> + vmlal.u32 q5,d22,d8
> + vshr.u64 q0,q0,#38
> + vmlal.u32 q9,d20,d7
> + vmlal.u32 q6,d24,d8
> + vmlal.u32 q7,d26,d8
> +
> +.Lshort_tail:
> + @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
> + @ horizontal addition
> +
> + vadd.i64 d16,d16,d17
> + vadd.i64 d10,d10,d11
> + vadd.i64 d18,d18,d19
> + vadd.i64 d12,d12,d13
> + vadd.i64 d14,d14,d15
> +
> + @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
> + @ lazy reduction, but without narrowing
> +
> + vshr.u64 q15,q8,#26
> + vand.i64 q8,q8,q0
> + vshr.u64 q4,q5,#26
> + vand.i64 q5,q5,q0
> + vadd.i64 q9,q9,q15 @ h3 -> h4
> + vadd.i64 q6,q6,q4 @ h0 -> h1
> +
> + vshr.u64 q15,q9,#26
> + vand.i64 q9,q9,q0
> + vshr.u64 q4,q6,#26
> + vand.i64 q6,q6,q0
> + vadd.i64 q7,q7,q4 @ h1 -> h2
> +
> + vadd.i64 q5,q5,q15
> + vshl.u64 q15,q15,#2
> + vshr.u64 q4,q7,#26
> + vand.i64 q7,q7,q0
> + vadd.i64 q5,q5,q15 @ h4 -> h0
> + vadd.i64 q8,q8,q4 @ h2 -> h3
> +
> + vshr.u64 q15,q5,#26
> + vand.i64 q5,q5,q0
> + vshr.u64 q4,q8,#26
> + vand.i64 q8,q8,q0
> + vadd.i64 q6,q6,q15 @ h0 -> h1
> + vadd.i64 q9,q9,q4 @ h3 -> h4
> +
> + cmp r2,#0
> + bne .Leven
> +
> + @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
> + @ store hash value
> +
> + vst4.32 {d10[0],d12[0],d14[0],d16[0]},[r0]!
> + vst1.32 {d18[0]},[r0]
> +
> + vldmia sp!,{d8-d15} @ epilogue
> + ldmia sp!,{r4-r7}
> +.Lno_data_neon:
> + bx lr @ bx lr
> +ENDPROC(poly1305_blocks_neon)
> +
> +.align 5
> +ENTRY(poly1305_emit_neon)
> + ldr ip,[r0,#36] @ is_base2_26
> +
> + stmdb sp!,{r4-r11}
> +
> + tst ip,ip
> + beq .Lpoly1305_emit_enter
> +
> + ldmia r0,{r3-r7}
> + eor r8,r8,r8
> +
> + adds r3,r3,r4,lsl#26 @ base 2^26 -> base 2^32
> + mov r4,r4,lsr#6
> + adcs r4,r4,r5,lsl#20
> + mov r5,r5,lsr#12
> + adcs r5,r5,r6,lsl#14
> + mov r6,r6,lsr#18
> + adcs r6,r6,r7,lsl#8
> + adc r7,r8,r7,lsr#24 @ can be partially reduced ...
> +
> + and r8,r7,#-4 @ ... so reduce
> + and r7,r6,#3
> + add r8,r8,r8,lsr#2 @ *= 5
> + adds r3,r3,r8
> + adcs r4,r4,#0
> + adcs r5,r5,#0
> + adcs r6,r6,#0
> + adc r7,r7,#0
> +
> + adds r8,r3,#5 @ compare to modulus
> + adcs r9,r4,#0
> + adcs r10,r5,#0
> + adcs r11,r6,#0
> + adc r7,r7,#0
> + tst r7,#4 @ did it carry/borrow?
> +
> + it ne
> + movne r3,r8
> + ldr r8,[r2,#0]
> + it ne
> + movne r4,r9
> + ldr r9,[r2,#4]
> + it ne
> + movne r5,r10
> + ldr r10,[r2,#8]
> + it ne
> + movne r6,r11
> + ldr r11,[r2,#12]
> +
> + adds r3,r3,r8 @ accumulate nonce
> + adcs r4,r4,r9
> + adcs r5,r5,r10
> + adc r6,r6,r11
> +
> +#ifdef __ARMEB__
> + rev r3,r3
> + rev r4,r4
> + rev r5,r5
> + rev r6,r6
> +#endif
> + str r3,[r1,#0] @ store the result
> + str r4,[r1,#4]
> + str r5,[r1,#8]
> + str r6,[r1,#12]
> +
> + ldmia sp!,{r4-r11}
> + bx lr @ bx lr
> +ENDPROC(poly1305_emit_neon)
> +
> +.align 5
> +.Lzeros:
> +.long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
> +#endif
> diff --git a/lib/zinc/poly1305/poly1305-arm64.S b/lib/zinc/poly1305/poly1305-arm64.S
> new file mode 100644
> index 000000000000..c20023544183
> --- /dev/null
> +++ b/lib/zinc/poly1305/poly1305-arm64.S
> @@ -0,0 +1,822 @@
> +/* SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0
> + *
> + * Copyright (C) 2015-2018 Jason A. Donenfeld <Jason@xxxxxxxxx>. All Rights Reserved.
> + * Copyright (C) 2006-2017 CRYPTOGAMS by <appro@xxxxxxxxxxx>. All Rights Reserved.
> + *
> + * This is based in part on Andy Polyakov's implementation from CRYPTOGAMS.
> + */
> +
> +#include <linux/linkage.h>
> +.text
> +
> +.align 5
> +ENTRY(poly1305_init_arm)
> + cmp x1,xzr
> + stp xzr,xzr,[x0] // zero hash value
> + stp xzr,xzr,[x0,#16] // [along with is_base2_26]
> +
> + csel x0,xzr,x0,eq
> + b.eq .Lno_key
> +
> + ldp x7,x8,[x1] // load key
> + mov x9,#0xfffffffc0fffffff
> + movk x9,#0x0fff,lsl#48
> +#ifdef __ARMEB__
> + rev x7,x7 // flip bytes
> + rev x8,x8
> +#endif
> + and x7,x7,x9 // &=0ffffffc0fffffff
> + and x9,x9,#-4
> + and x8,x8,x9 // &=0ffffffc0ffffffc
> + stp x7,x8,[x0,#32] // save key value
> +
> +.Lno_key:
> + ret
> +ENDPROC(poly1305_init_arm)
> +
> +.align 5
> +ENTRY(poly1305_blocks_arm)
> + ands x2,x2,#-16
> + b.eq .Lno_data
> +
> + ldp x4,x5,[x0] // load hash value
> + ldp x7,x8,[x0,#32] // load key value
> + ldr x6,[x0,#16]
> + add x9,x8,x8,lsr#2 // s1 = r1 + (r1 >> 2)
> + b .Loop
> +
> +.align 5
> +.Loop:
> + ldp x10,x11,[x1],#16 // load input
> + sub x2,x2,#16
> +#ifdef __ARMEB__
> + rev x10,x10
> + rev x11,x11
> +#endif
> + adds x4,x4,x10 // accumulate input
> + adcs x5,x5,x11
> +
> + mul x12,x4,x7 // h0*r0
> + adc x6,x6,x3
> + umulh x13,x4,x7
> +
> + mul x10,x5,x9 // h1*5*r1
> + umulh x11,x5,x9
> +
> + adds x12,x12,x10
> + mul x10,x4,x8 // h0*r1
> + adc x13,x13,x11
> + umulh x14,x4,x8
> +
> + adds x13,x13,x10
> + mul x10,x5,x7 // h1*r0
> + adc x14,x14,xzr
> + umulh x11,x5,x7
> +
> + adds x13,x13,x10
> + mul x10,x6,x9 // h2*5*r1
> + adc x14,x14,x11
> + mul x11,x6,x7 // h2*r0
> +
> + adds x13,x13,x10
> + adc x14,x14,x11
> +
> + and x10,x14,#-4 // final reduction
> + and x6,x14,#3
> + add x10,x10,x14,lsr#2
> + adds x4,x12,x10
> + adcs x5,x13,xzr
> + adc x6,x6,xzr
> +
> + cbnz x2,.Loop
> +
> + stp x4,x5,[x0] // store hash value
> + str x6,[x0,#16]
> +
> +.Lno_data:
> + ret
> +ENDPROC(poly1305_blocks_arm)
> +
> +.align 5
> +ENTRY(poly1305_emit_arm)
> + ldp x4,x5,[x0] // load hash base 2^64
> + ldr x6,[x0,#16]
> + ldp x10,x11,[x2] // load nonce
> +
> + adds x12,x4,#5 // compare to modulus
> + adcs x13,x5,xzr
> + adc x14,x6,xzr
> +
> + tst x14,#-4 // see if it's carried/borrowed
> +
> + csel x4,x4,x12,eq
> + csel x5,x5,x13,eq
> +
> +#ifdef __ARMEB__
> + ror x10,x10,#32 // flip nonce words
> + ror x11,x11,#32
> +#endif
> + adds x4,x4,x10 // accumulate nonce
> + adc x5,x5,x11
> +#ifdef __ARMEB__
> + rev x4,x4 // flip output bytes
> + rev x5,x5
> +#endif
> + stp x4,x5,[x1] // write result
> +
> + ret
> +ENDPROC(poly1305_emit_arm)
> +
> +.align 5
> +__poly1305_mult:
> + mul x12,x4,x7 // h0*r0
> + umulh x13,x4,x7
> +
> + mul x10,x5,x9 // h1*5*r1
> + umulh x11,x5,x9
> +
> + adds x12,x12,x10
> + mul x10,x4,x8 // h0*r1
> + adc x13,x13,x11
> + umulh x14,x4,x8
> +
> + adds x13,x13,x10
> + mul x10,x5,x7 // h1*r0
> + adc x14,x14,xzr
> + umulh x11,x5,x7
> +
> + adds x13,x13,x10
> + mul x10,x6,x9 // h2*5*r1
> + adc x14,x14,x11
> + mul x11,x6,x7 // h2*r0
> +
> + adds x13,x13,x10
> + adc x14,x14,x11
> +
> + and x10,x14,#-4 // final reduction
> + and x6,x14,#3
> + add x10,x10,x14,lsr#2
> + adds x4,x12,x10
> + adcs x5,x13,xzr
> + adc x6,x6,xzr
> +
> + ret
> +
> +__poly1305_splat:
> + and x12,x4,#0x03ffffff // base 2^64 -> base 2^26
> + ubfx x13,x4,#26,#26
> + extr x14,x5,x4,#52
> + and x14,x14,#0x03ffffff
> + ubfx x15,x5,#14,#26
> + extr x16,x6,x5,#40
> +
> + str w12,[x0,#16*0] // r0
> + add w12,w13,w13,lsl#2 // r1*5
> + str w13,[x0,#16*1] // r1
> + add w13,w14,w14,lsl#2 // r2*5
> + str w12,[x0,#16*2] // s1
> + str w14,[x0,#16*3] // r2
> + add w14,w15,w15,lsl#2 // r3*5
> + str w13,[x0,#16*4] // s2
> + str w15,[x0,#16*5] // r3
> + add w15,w16,w16,lsl#2 // r4*5
> + str w14,[x0,#16*6] // s3
> + str w16,[x0,#16*7] // r4
> + str w15,[x0,#16*8] // s4
> +
> + ret
> +
> +.align 5
> +ENTRY(poly1305_blocks_neon)
> + ldr x17,[x0,#24]
> + cmp x2,#128
> + b.hs .Lblocks_neon
> + cbz x17,poly1305_blocks_arm
> +
> +.Lblocks_neon:
> + stp x29,x30,[sp,#-80]!
> + add x29,sp,#0
> +
> + ands x2,x2,#-16
> + b.eq .Lno_data_neon
> +
> + cbz x17,.Lbase2_64_neon
> +
> + ldp w10,w11,[x0] // load hash value base 2^26
> + ldp w12,w13,[x0,#8]
> + ldr w14,[x0,#16]
> +
> + tst x2,#31
> + b.eq .Leven_neon
> +
> + ldp x7,x8,[x0,#32] // load key value
> +
> + add x4,x10,x11,lsl#26 // base 2^26 -> base 2^64
> + lsr x5,x12,#12
> + adds x4,x4,x12,lsl#52
> + add x5,x5,x13,lsl#14
> + adc x5,x5,xzr
> + lsr x6,x14,#24
> + adds x5,x5,x14,lsl#40
> + adc x14,x6,xzr // can be partially reduced...
> +
> + ldp x12,x13,[x1],#16 // load input
> + sub x2,x2,#16
> + add x9,x8,x8,lsr#2 // s1 = r1 + (r1 >> 2)
> +
> + and x10,x14,#-4 // ... so reduce
> + and x6,x14,#3
> + add x10,x10,x14,lsr#2
> + adds x4,x4,x10
> + adcs x5,x5,xzr
> + adc x6,x6,xzr
> +
> +#ifdef __ARMEB__
> + rev x12,x12
> + rev x13,x13
> +#endif
> + adds x4,x4,x12 // accumulate input
> + adcs x5,x5,x13
> + adc x6,x6,x3
> +
> + bl __poly1305_mult
> + ldr x30,[sp,#8]
> +
> + cbz x3,.Lstore_base2_64_neon
> +
> + and x10,x4,#0x03ffffff // base 2^64 -> base 2^26
> + ubfx x11,x4,#26,#26
> + extr x12,x5,x4,#52
> + and x12,x12,#0x03ffffff
> + ubfx x13,x5,#14,#26
> + extr x14,x6,x5,#40
> +
> + cbnz x2,.Leven_neon
> +
> + stp w10,w11,[x0] // store hash value base 2^26
> + stp w12,w13,[x0,#8]
> + str w14,[x0,#16]
> + b .Lno_data_neon
> +
> +.align 4
> +.Lstore_base2_64_neon:
> + stp x4,x5,[x0] // store hash value base 2^64
> + stp x6,xzr,[x0,#16] // note that is_base2_26 is zeroed
> + b .Lno_data_neon
> +
> +.align 4
> +.Lbase2_64_neon:
> + ldp x7,x8,[x0,#32] // load key value
> +
> + ldp x4,x5,[x0] // load hash value base 2^64
> + ldr x6,[x0,#16]
> +
> + tst x2,#31
> + b.eq .Linit_neon
> +
> + ldp x12,x13,[x1],#16 // load input
> + sub x2,x2,#16
> + add x9,x8,x8,lsr#2 // s1 = r1 + (r1 >> 2)
> +#ifdef __ARMEB__
> + rev x12,x12
> + rev x13,x13
> +#endif
> + adds x4,x4,x12 // accumulate input
> + adcs x5,x5,x13
> + adc x6,x6,x3
> +
> + bl __poly1305_mult
> +
> +.Linit_neon:
> + and x10,x4,#0x03ffffff // base 2^64 -> base 2^26
> + ubfx x11,x4,#26,#26
> + extr x12,x5,x4,#52
> + and x12,x12,#0x03ffffff
> + ubfx x13,x5,#14,#26
> + extr x14,x6,x5,#40
> +
> + stp d8,d9,[sp,#16] // meet ABI requirements
> + stp d10,d11,[sp,#32]
> + stp d12,d13,[sp,#48]
> + stp d14,d15,[sp,#64]
> +
> + fmov d24,x10
> + fmov d25,x11
> + fmov d26,x12
> + fmov d27,x13
> + fmov d28,x14
> +
> + ////////////////////////////////// initialize r^n table
> + mov x4,x7 // r^1
> + add x9,x8,x8,lsr#2 // s1 = r1 + (r1 >> 2)
> + mov x5,x8
> + mov x6,xzr
> + add x0,x0,#48+12
> + bl __poly1305_splat
> +
> + bl __poly1305_mult // r^2
> + sub x0,x0,#4
> + bl __poly1305_splat
> +
> + bl __poly1305_mult // r^3
> + sub x0,x0,#4
> + bl __poly1305_splat
> +
> + bl __poly1305_mult // r^4
> + sub x0,x0,#4
> + bl __poly1305_splat
> + ldr x30,[sp,#8]
> +
> + add x16,x1,#32
> + adr x17,.Lzeros
> + subs x2,x2,#64
> + csel x16,x17,x16,lo
> +
> + mov x4,#1
> + str x4,[x0,#-24] // set is_base2_26
> + sub x0,x0,#48 // restore original x0
> + b .Ldo_neon
> +
> +.align 4
> +.Leven_neon:
> + add x16,x1,#32
> + adr x17,.Lzeros
> + subs x2,x2,#64
> + csel x16,x17,x16,lo
> +
> + stp d8,d9,[sp,#16] // meet ABI requirements
> + stp d10,d11,[sp,#32]
> + stp d12,d13,[sp,#48]
> + stp d14,d15,[sp,#64]
> +
> + fmov d24,x10
> + fmov d25,x11
> + fmov d26,x12
> + fmov d27,x13
> + fmov d28,x14
> +
> +.Ldo_neon:
> + ldp x8,x12,[x16],#16 // inp[2:3] (or zero)
> + ldp x9,x13,[x16],#48
> +
> + lsl x3,x3,#24
> + add x15,x0,#48
> +
> +#ifdef __ARMEB__
> + rev x8,x8
> + rev x12,x12
> + rev x9,x9
> + rev x13,x13
> +#endif
> + and x4,x8,#0x03ffffff // base 2^64 -> base 2^26
> + and x5,x9,#0x03ffffff
> + ubfx x6,x8,#26,#26
> + ubfx x7,x9,#26,#26
> + add x4,x4,x5,lsl#32 // bfi x4,x5,#32,#32
> + extr x8,x12,x8,#52
> + extr x9,x13,x9,#52
> + add x6,x6,x7,lsl#32 // bfi x6,x7,#32,#32
> + fmov d14,x4
> + and x8,x8,#0x03ffffff
> + and x9,x9,#0x03ffffff
> + ubfx x10,x12,#14,#26
> + ubfx x11,x13,#14,#26
> + add x12,x3,x12,lsr#40
> + add x13,x3,x13,lsr#40
> + add x8,x8,x9,lsl#32 // bfi x8,x9,#32,#32
> + fmov d15,x6
> + add x10,x10,x11,lsl#32 // bfi x10,x11,#32,#32
> + add x12,x12,x13,lsl#32 // bfi x12,x13,#32,#32
> + fmov d16,x8
> + fmov d17,x10
> + fmov d18,x12
> +
> + ldp x8,x12,[x1],#16 // inp[0:1]
> + ldp x9,x13,[x1],#48
> +
> + ld1 {v0.4s,v1.4s,v2.4s,v3.4s},[x15],#64
> + ld1 {v4.4s,v5.4s,v6.4s,v7.4s},[x15],#64
> + ld1 {v8.4s},[x15]
> +
> +#ifdef __ARMEB__
> + rev x8,x8
> + rev x12,x12
> + rev x9,x9
> + rev x13,x13
> +#endif
> + and x4,x8,#0x03ffffff // base 2^64 -> base 2^26
> + and x5,x9,#0x03ffffff
> + ubfx x6,x8,#26,#26
> + ubfx x7,x9,#26,#26
> + add x4,x4,x5,lsl#32 // bfi x4,x5,#32,#32
> + extr x8,x12,x8,#52
> + extr x9,x13,x9,#52
> + add x6,x6,x7,lsl#32 // bfi x6,x7,#32,#32
> + fmov d9,x4
> + and x8,x8,#0x03ffffff
> + and x9,x9,#0x03ffffff
> + ubfx x10,x12,#14,#26
> + ubfx x11,x13,#14,#26
> + add x12,x3,x12,lsr#40
> + add x13,x3,x13,lsr#40
> + add x8,x8,x9,lsl#32 // bfi x8,x9,#32,#32
> + fmov d10,x6
> + add x10,x10,x11,lsl#32 // bfi x10,x11,#32,#32
> + add x12,x12,x13,lsl#32 // bfi x12,x13,#32,#32
> + movi v31.2d,#-1
> + fmov d11,x8
> + fmov d12,x10
> + fmov d13,x12
> + ushr v31.2d,v31.2d,#38
> +
> + b.ls .Lskip_loop
> +
> +.align 4
> +.Loop_neon:
> + ////////////////////////////////////////////////////////////////
> + // ((inp[0]*r^4+inp[2]*r^2+inp[4])*r^4+inp[6]*r^2
> + // ((inp[1]*r^4+inp[3]*r^2+inp[5])*r^3+inp[7]*r
> + // ___________________/
> + // ((inp[0]*r^4+inp[2]*r^2+inp[4])*r^4+inp[6]*r^2+inp[8])*r^2
> + // ((inp[1]*r^4+inp[3]*r^2+inp[5])*r^4+inp[7]*r^2+inp[9])*r
> + // ___________________/ ____________________/
> + //
> + // Note that we start with inp[2:3]*r^2. This is because it
> + // doesn't depend on reduction in previous iteration.
> + ////////////////////////////////////////////////////////////////
> + // d4 = h0*r4 + h1*r3 + h2*r2 + h3*r1 + h4*r0
> + // d3 = h0*r3 + h1*r2 + h2*r1 + h3*r0 + h4*5*r4
> + // d2 = h0*r2 + h1*r1 + h2*r0 + h3*5*r4 + h4*5*r3
> + // d1 = h0*r1 + h1*r0 + h2*5*r4 + h3*5*r3 + h4*5*r2
> + // d0 = h0*r0 + h1*5*r4 + h2*5*r3 + h3*5*r2 + h4*5*r1
> +
> + subs x2,x2,#64
> + umull v23.2d,v14.2s,v7.s[2]
> + csel x16,x17,x16,lo
> + umull v22.2d,v14.2s,v5.s[2]
> + umull v21.2d,v14.2s,v3.s[2]
> + ldp x8,x12,[x16],#16 // inp[2:3] (or zero)
> + umull v20.2d,v14.2s,v1.s[2]
> + ldp x9,x13,[x16],#48
> + umull v19.2d,v14.2s,v0.s[2]
> +#ifdef __ARMEB__
> + rev x8,x8
> + rev x12,x12
> + rev x9,x9
> + rev x13,x13
> +#endif
> +
> + umlal v23.2d,v15.2s,v5.s[2]
> + and x4,x8,#0x03ffffff // base 2^64 -> base 2^26
> + umlal v22.2d,v15.2s,v3.s[2]
> + and x5,x9,#0x03ffffff
> + umlal v21.2d,v15.2s,v1.s[2]
> + ubfx x6,x8,#26,#26
> + umlal v20.2d,v15.2s,v0.s[2]
> + ubfx x7,x9,#26,#26
> + umlal v19.2d,v15.2s,v8.s[2]
> + add x4,x4,x5,lsl#32 // bfi x4,x5,#32,#32
> +
> + umlal v23.2d,v16.2s,v3.s[2]
> + extr x8,x12,x8,#52
> + umlal v22.2d,v16.2s,v1.s[2]
> + extr x9,x13,x9,#52
> + umlal v21.2d,v16.2s,v0.s[2]
> + add x6,x6,x7,lsl#32 // bfi x6,x7,#32,#32
> + umlal v20.2d,v16.2s,v8.s[2]
> + fmov d14,x4
> + umlal v19.2d,v16.2s,v6.s[2]
> + and x8,x8,#0x03ffffff
> +
> + umlal v23.2d,v17.2s,v1.s[2]
> + and x9,x9,#0x03ffffff
> + umlal v22.2d,v17.2s,v0.s[2]
> + ubfx x10,x12,#14,#26
> + umlal v21.2d,v17.2s,v8.s[2]
> + ubfx x11,x13,#14,#26
> + umlal v20.2d,v17.2s,v6.s[2]
> + add x8,x8,x9,lsl#32 // bfi x8,x9,#32,#32
> + umlal v19.2d,v17.2s,v4.s[2]
> + fmov d15,x6
> +
> + add v11.2s,v11.2s,v26.2s
> + add x12,x3,x12,lsr#40
> + umlal v23.2d,v18.2s,v0.s[2]
> + add x13,x3,x13,lsr#40
> + umlal v22.2d,v18.2s,v8.s[2]
> + add x10,x10,x11,lsl#32 // bfi x10,x11,#32,#32
> + umlal v21.2d,v18.2s,v6.s[2]
> + add x12,x12,x13,lsl#32 // bfi x12,x13,#32,#32
> + umlal v20.2d,v18.2s,v4.s[2]
> + fmov d16,x8
> + umlal v19.2d,v18.2s,v2.s[2]
> + fmov d17,x10
> +
> + ////////////////////////////////////////////////////////////////
> + // (hash+inp[0:1])*r^4 and accumulate
> +
> + add v9.2s,v9.2s,v24.2s
> + fmov d18,x12
> + umlal v22.2d,v11.2s,v1.s[0]
> + ldp x8,x12,[x1],#16 // inp[0:1]
> + umlal v19.2d,v11.2s,v6.s[0]
> + ldp x9,x13,[x1],#48
> + umlal v23.2d,v11.2s,v3.s[0]
> + umlal v20.2d,v11.2s,v8.s[0]
> + umlal v21.2d,v11.2s,v0.s[0]
> +#ifdef __ARMEB__
> + rev x8,x8
> + rev x12,x12
> + rev x9,x9
> + rev x13,x13
> +#endif
> +
> + add v10.2s,v10.2s,v25.2s
> + umlal v22.2d,v9.2s,v5.s[0]
> + umlal v23.2d,v9.2s,v7.s[0]
> + and x4,x8,#0x03ffffff // base 2^64 -> base 2^26
> + umlal v21.2d,v9.2s,v3.s[0]
> + and x5,x9,#0x03ffffff
> + umlal v19.2d,v9.2s,v0.s[0]
> + ubfx x6,x8,#26,#26
> + umlal v20.2d,v9.2s,v1.s[0]
> + ubfx x7,x9,#26,#26
> +
> + add v12.2s,v12.2s,v27.2s
> + add x4,x4,x5,lsl#32 // bfi x4,x5,#32,#32
> + umlal v22.2d,v10.2s,v3.s[0]
> + extr x8,x12,x8,#52
> + umlal v23.2d,v10.2s,v5.s[0]
> + extr x9,x13,x9,#52
> + umlal v19.2d,v10.2s,v8.s[0]
> + add x6,x6,x7,lsl#32 // bfi x6,x7,#32,#32
> + umlal v21.2d,v10.2s,v1.s[0]
> + fmov d9,x4
> + umlal v20.2d,v10.2s,v0.s[0]
> + and x8,x8,#0x03ffffff
> +
> + add v13.2s,v13.2s,v28.2s
> + and x9,x9,#0x03ffffff
> + umlal v22.2d,v12.2s,v0.s[0]
> + ubfx x10,x12,#14,#26
> + umlal v19.2d,v12.2s,v4.s[0]
> + ubfx x11,x13,#14,#26
> + umlal v23.2d,v12.2s,v1.s[0]
> + add x8,x8,x9,lsl#32 // bfi x8,x9,#32,#32
> + umlal v20.2d,v12.2s,v6.s[0]
> + fmov d10,x6
> + umlal v21.2d,v12.2s,v8.s[0]
> + add x12,x3,x12,lsr#40
> +
> + umlal v22.2d,v13.2s,v8.s[0]
> + add x13,x3,x13,lsr#40
> + umlal v19.2d,v13.2s,v2.s[0]
> + add x10,x10,x11,lsl#32 // bfi x10,x11,#32,#32
> + umlal v23.2d,v13.2s,v0.s[0]
> + add x12,x12,x13,lsl#32 // bfi x12,x13,#32,#32
> + umlal v20.2d,v13.2s,v4.s[0]
> + fmov d11,x8
> + umlal v21.2d,v13.2s,v6.s[0]
> + fmov d12,x10
> + fmov d13,x12
> +
> + /////////////////////////////////////////////////////////////////
> + // lazy reduction as discussed in "NEON crypto" by D.J. Bernstein
> + // and P. Schwabe
> + //
> + // [see discussion in poly1305-armv4 module]
> +
> + ushr v29.2d,v22.2d,#26
> + xtn v27.2s,v22.2d
> + ushr v30.2d,v19.2d,#26
> + and v19.16b,v19.16b,v31.16b
> + add v23.2d,v23.2d,v29.2d // h3 -> h4
> + bic v27.2s,#0xfc,lsl#24 // &=0x03ffffff
> + add v20.2d,v20.2d,v30.2d // h0 -> h1
> +
> + ushr v29.2d,v23.2d,#26
> + xtn v28.2s,v23.2d
> + ushr v30.2d,v20.2d,#26
> + xtn v25.2s,v20.2d
> + bic v28.2s,#0xfc,lsl#24
> + add v21.2d,v21.2d,v30.2d // h1 -> h2
> +
> + add v19.2d,v19.2d,v29.2d
> + shl v29.2d,v29.2d,#2
> + shrn v30.2s,v21.2d,#26
> + xtn v26.2s,v21.2d
> + add v19.2d,v19.2d,v29.2d // h4 -> h0
> + bic v25.2s,#0xfc,lsl#24
> + add v27.2s,v27.2s,v30.2s // h2 -> h3
> + bic v26.2s,#0xfc,lsl#24
> +
> + shrn v29.2s,v19.2d,#26
> + xtn v24.2s,v19.2d
> + ushr v30.2s,v27.2s,#26
> + bic v27.2s,#0xfc,lsl#24
> + bic v24.2s,#0xfc,lsl#24
> + add v25.2s,v25.2s,v29.2s // h0 -> h1
> + add v28.2s,v28.2s,v30.2s // h3 -> h4
> +
> + b.hi .Loop_neon
> +
> +.Lskip_loop:
> + dup v16.2d,v16.d[0]
> + add v11.2s,v11.2s,v26.2s
> +
> + ////////////////////////////////////////////////////////////////
> + // multiply (inp[0:1]+hash) or inp[2:3] by r^2:r^1
> +
> + adds x2,x2,#32
> + b.ne .Long_tail
> +
> + dup v16.2d,v11.d[0]
> + add v14.2s,v9.2s,v24.2s
> + add v17.2s,v12.2s,v27.2s
> + add v15.2s,v10.2s,v25.2s
> + add v18.2s,v13.2s,v28.2s
> +
> +.Long_tail:
> + dup v14.2d,v14.d[0]
> + umull2 v19.2d,v16.4s,v6.4s
> + umull2 v22.2d,v16.4s,v1.4s
> + umull2 v23.2d,v16.4s,v3.4s
> + umull2 v21.2d,v16.4s,v0.4s
> + umull2 v20.2d,v16.4s,v8.4s
> +
> + dup v15.2d,v15.d[0]
> + umlal2 v19.2d,v14.4s,v0.4s
> + umlal2 v21.2d,v14.4s,v3.4s
> + umlal2 v22.2d,v14.4s,v5.4s
> + umlal2 v23.2d,v14.4s,v7.4s
> + umlal2 v20.2d,v14.4s,v1.4s
> +
> + dup v17.2d,v17.d[0]
> + umlal2 v19.2d,v15.4s,v8.4s
> + umlal2 v22.2d,v15.4s,v3.4s
> + umlal2 v21.2d,v15.4s,v1.4s
> + umlal2 v23.2d,v15.4s,v5.4s
> + umlal2 v20.2d,v15.4s,v0.4s
> +
> + dup v18.2d,v18.d[0]
> + umlal2 v22.2d,v17.4s,v0.4s
> + umlal2 v23.2d,v17.4s,v1.4s
> + umlal2 v19.2d,v17.4s,v4.4s
> + umlal2 v20.2d,v17.4s,v6.4s
> + umlal2 v21.2d,v17.4s,v8.4s
> +
> + umlal2 v22.2d,v18.4s,v8.4s
> + umlal2 v19.2d,v18.4s,v2.4s
> + umlal2 v23.2d,v18.4s,v0.4s
> + umlal2 v20.2d,v18.4s,v4.4s
> + umlal2 v21.2d,v18.4s,v6.4s
> +
> + b.eq .Lshort_tail
> +
> + ////////////////////////////////////////////////////////////////
> + // (hash+inp[0:1])*r^4:r^3 and accumulate
> +
> + add v9.2s,v9.2s,v24.2s
> + umlal v22.2d,v11.2s,v1.2s
> + umlal v19.2d,v11.2s,v6.2s
> + umlal v23.2d,v11.2s,v3.2s
> + umlal v20.2d,v11.2s,v8.2s
> + umlal v21.2d,v11.2s,v0.2s
> +
> + add v10.2s,v10.2s,v25.2s
> + umlal v22.2d,v9.2s,v5.2s
> + umlal v19.2d,v9.2s,v0.2s
> + umlal v23.2d,v9.2s,v7.2s
> + umlal v20.2d,v9.2s,v1.2s
> + umlal v21.2d,v9.2s,v3.2s
> +
> + add v12.2s,v12.2s,v27.2s
> + umlal v22.2d,v10.2s,v3.2s
> + umlal v19.2d,v10.2s,v8.2s
> + umlal v23.2d,v10.2s,v5.2s
> + umlal v20.2d,v10.2s,v0.2s
> + umlal v21.2d,v10.2s,v1.2s
> +
> + add v13.2s,v13.2s,v28.2s
> + umlal v22.2d,v12.2s,v0.2s
> + umlal v19.2d,v12.2s,v4.2s
> + umlal v23.2d,v12.2s,v1.2s
> + umlal v20.2d,v12.2s,v6.2s
> + umlal v21.2d,v12.2s,v8.2s
> +
> + umlal v22.2d,v13.2s,v8.2s
> + umlal v19.2d,v13.2s,v2.2s
> + umlal v23.2d,v13.2s,v0.2s
> + umlal v20.2d,v13.2s,v4.2s
> + umlal v21.2d,v13.2s,v6.2s
> +
> +.Lshort_tail:
> + ////////////////////////////////////////////////////////////////
> + // horizontal add
> +
> + addp v22.2d,v22.2d,v22.2d
> + ldp d8,d9,[sp,#16] // meet ABI requirements
> + addp v19.2d,v19.2d,v19.2d
> + ldp d10,d11,[sp,#32]
> + addp v23.2d,v23.2d,v23.2d
> + ldp d12,d13,[sp,#48]
> + addp v20.2d,v20.2d,v20.2d
> + ldp d14,d15,[sp,#64]
> + addp v21.2d,v21.2d,v21.2d
> +
> + ////////////////////////////////////////////////////////////////
> + // lazy reduction, but without narrowing
> +
> + ushr v29.2d,v22.2d,#26
> + and v22.16b,v22.16b,v31.16b
> + ushr v30.2d,v19.2d,#26
> + and v19.16b,v19.16b,v31.16b
> +
> + add v23.2d,v23.2d,v29.2d // h3 -> h4
> + add v20.2d,v20.2d,v30.2d // h0 -> h1
> +
> + ushr v29.2d,v23.2d,#26
> + and v23.16b,v23.16b,v31.16b
> + ushr v30.2d,v20.2d,#26
> + and v20.16b,v20.16b,v31.16b
> + add v21.2d,v21.2d,v30.2d // h1 -> h2
> +
> + add v19.2d,v19.2d,v29.2d
> + shl v29.2d,v29.2d,#2
> + ushr v30.2d,v21.2d,#26
> + and v21.16b,v21.16b,v31.16b
> + add v19.2d,v19.2d,v29.2d // h4 -> h0
> + add v22.2d,v22.2d,v30.2d // h2 -> h3
> +
> + ushr v29.2d,v19.2d,#26
> + and v19.16b,v19.16b,v31.16b
> + ushr v30.2d,v22.2d,#26
> + and v22.16b,v22.16b,v31.16b
> + add v20.2d,v20.2d,v29.2d // h0 -> h1
> + add v23.2d,v23.2d,v30.2d // h3 -> h4
> +
> + ////////////////////////////////////////////////////////////////
> + // write the result, can be partially reduced
> +
> + st4 {v19.s,v20.s,v21.s,v22.s}[0],[x0],#16
> + st1 {v23.s}[0],[x0]
> +
> +.Lno_data_neon:
> + ldr x29,[sp],#80
> + ret
> +ENDPROC(poly1305_blocks_neon)
> +
> +.align 5
> +ENTRY(poly1305_emit_neon)
> + ldr x17,[x0,#24]
> + cbz x17,poly1305_emit_arm
> +
> + ldp w10,w11,[x0] // load hash value base 2^26
> + ldp w12,w13,[x0,#8]
> + ldr w14,[x0,#16]
> +
> + add x4,x10,x11,lsl#26 // base 2^26 -> base 2^64
> + lsr x5,x12,#12
> + adds x4,x4,x12,lsl#52
> + add x5,x5,x13,lsl#14
> + adc x5,x5,xzr
> + lsr x6,x14,#24
> + adds x5,x5,x14,lsl#40
> + adc x6,x6,xzr // can be partially reduced...
> +
> + ldp x10,x11,[x2] // load nonce
> +
> + and x12,x6,#-4 // ... so reduce
> + add x12,x12,x6,lsr#2
> + and x6,x6,#3
> + adds x4,x4,x12
> + adcs x5,x5,xzr
> + adc x6,x6,xzr
> +
> + adds x12,x4,#5 // compare to modulus
> + adcs x13,x5,xzr
> + adc x14,x6,xzr
> +
> + tst x14,#-4 // see if it's carried/borrowed
> +
> + csel x4,x4,x12,eq
> + csel x5,x5,x13,eq
> +
> +#ifdef __ARMEB__
> + ror x10,x10,#32 // flip nonce words
> + ror x11,x11,#32
> +#endif
> + adds x4,x4,x10 // accumulate nonce
> + adc x5,x5,x11
> +#ifdef __ARMEB__
> + rev x4,x4 // flip output bytes
> + rev x5,x5
> +#endif
> + stp x4,x5,[x1] // write result
> +
> + ret
> +ENDPROC(poly1305_emit_neon)
> +
> +.align 5
> +.Lzeros:
> +.long 0,0,0,0,0,0,0,0
> --
> 2.19.0
>
