On 2018-08-10 08:11 PM, Joe Perches wrote:
On Fri, 2018-08-10 at 16:02 -0400, Nicolas Pitre wrote:
On Fri, 10 Aug 2018, Joe Perches wrote:
On Fri, 2018-08-10 at 14:12 -0500, Jeff Lien wrote:
This patch provides a performance improvement for the CRC16 calculations done in read/write
workloads using the T10 Type 1/2/3 guard field. For example, today with sequential write
workloads (one thread/CPU of IO) we consume 100% of the CPU because of the CRC16 computation
bottleneck. Today's block devices are considerably faster, but the CRC16 calculation prevents
folks from utilizing the throughput of such devices. To speed up this calculation and expose
the block device throughput, we slice the old single byte for loop into a 16 byte for loop,
with a larger CRC table to match. The result has shown 5x performance improvements on various
big endian and little endian systems running the 4.18.0 kernel version.
Thanks.
This seems a sensible tradeoff for the 4k text size increase.
More like 7.5KB. Would be best if this was configurable so the small
version remained available.
Maybe something like: (compiled, untested)
---
crypto/Kconfig | 10 +
crypto/crct10dif_common.c | 543 +++++++++++++++++++++++++++++++++++++++++++++-
2 files changed, 549 insertions(+), 4 deletions(-)
diff --git a/crypto/Kconfig b/crypto/Kconfig
index f3e40ac56d93..88d9d17bb18a 100644
--- a/crypto/Kconfig
+++ b/crypto/Kconfig
@@ -618,6 +618,16 @@ config CRYPTO_CRCT10DIF
a crypto transform. This allows for faster crc t10 diff
transforms to be used if they are available.
+config CRYPTO_CRCT10DIF_TABLE_SIZE
+ int "Size of CRCT10DIF crc tables (as a power of 2)"
+ depends on CRYPTO_CRCT10DIF
+ range 1 5
+ default 1 if EMBEDDED
+ default 5
+ help
+ Set the table size used by the CRYPTO_CRCT10DIF crc calculation
+ Larger values use more memory and are faster.
+
config CRYPTO_CRCT10DIF_PCLMUL
tristate "CRCT10DIF PCLMULQDQ hardware acceleration"
depends on X86 && 64BIT && CRC_T10DIF
diff --git a/crypto/crct10dif_common.c b/crypto/crct10dif_common.c
index b2fab366f518..4eb1c50c3688 100644
--- a/crypto/crct10dif_common.c
+++ b/crypto/crct10dif_common.c
@@ -32,7 +32,8 @@
* x^16 + x^15 + x^11 + x^9 + x^8 + x^7 + x^5 + x^4 + x^2 + x + 1
* gt: 0x8bb7
*/
-static const __u16 t10_dif_crc_table[256] = {
+static const __u16 t10dif_crc_table[][256] = {
+ {
<snip data table>
+ },
+#endif
};
__u16 crc_t10dif_generic(__u16 crc, const unsigned char *buffer, size_t len)
{
- unsigned int i;
+ const u8 *ptr = (const __u8 *)buffer;
+ const u8 *ptr_end = ptr + len;
+#if CONFIG_CRYPTO_CRCT10DIF_TABLE_SIZE > 1
+ size_t tablesize = 1 << (CONFIG_CRYPTO_CRCT10DIF_TABLE_SIZE - 1);
+ const u8 *ptr_last = ptr + (len / tablesize * tablesize);
- for (i = 0 ; i < len ; i++)
- crc = (crc << 8) ^ t10_dif_crc_table[((crc >> 8) ^ buffer[i]) & 0xff];
+ while (ptr < ptr_last) {
+ size_t index = tablesize;
+ __u16 t;
+
+ t = t10dif_crc_table[--index][*ptr++ ^ (u8)(crc >> 8)];
+ t ^= t10dif_crc_table[--index][*ptr++ ^ (u8)crc];
+ crc = t;
+ while (index > 0)
+ crc ^= t10dif_crc_table[--index][*ptr++];
+ }
+#endif
+ while (ptr < ptr_end)
+ crc = t10dif_crc_table[0][*ptr++ ^ (u8)(crc >> 8)] ^ (crc << 8);
return crc;
}
It is a bit messy but below is a copy and paste of a table 27 from draft SBC-4
revision 15 in chapter 4.22.4.4 on page 87.
Table 27 — CRC test cases
Pattern
32 bytes each set to 00h CRC=0000h
32 bytes each set to FFh CRC=A293h
32 bytes of an incrementing pattern from 00h to 1Fh CRC=0224h
2 bytes each set to FFh followed by 30 bytes set to 00h CRC=21B8h
32 bytes of a decrementing pattern from FFh to E0h CRC=A0B7h
There is also example C code for its calculation in Annex C on pages
375 and 376.
Doug Gilbert
