Hi, Eric, Thanks for your reply. I have run your program on an original kernel and it reproduced the crash. And I also run the program on a kernel with our patch, but there was no crash. I think the reason of the crash is the parameter buffer is aligned with the page . So the address of the parameter buffer starts at the beginning of the page, which making "walk->offset = 0" and generating the crash. I add some logs in "scatterwalk_pagedone()" to print the value of walk->offset, and the log before the crash shows that "walk->offset = 0". And I do not understand why "walk->offset = 0" means no data to be processed. In the structure " scatterlist", the member "offset" represents the offset of the buffer in the page, and the member length represents the length of the buffer. In function "af_alg_make_sg()", if a buffer occupies more than one pages, the offset will also be set to 0 in the second and following pages. And In function scatterwalk_done(), walk->offset = 0 will also allow to call "scatterwalk_pagedone()". So I think that when "walk->offset = 0" the page needs to be flushed as well. BRs GaoKui > -----邮件原件----- > 发件人: linux-crypto-owner@xxxxxxxxxxxxxxx [mailto:linux-crypto- > owner@xxxxxxxxxxxxxxx] 代表 Eric Biggers > 发送时间: 2018年7月24日 1:55 > 收件人: linux-crypto@xxxxxxxxxxxxxxx; Herbert Xu > <herbert@xxxxxxxxxxxxxxxxxxx> > 抄送: Liuchao (H) <liuchao741@xxxxxxxxxx>; 罗新强 > <luoxinqiang2@xxxxxxxxxx>; gaokui (A) <gaokui1@xxxxxxxxxx>; Eric > Biggers <ebiggers@xxxxxxxxxx> > 主题: [PATCH 1/3] crypto: skcipher - fix crash flushing dcache in error path > > From: Eric Biggers <ebiggers@xxxxxxxxxx> > > scatterwalk_done() is only meant to be called after a nonzero number of > bytes have been processed, since scatterwalk_pagedone() will flush the > dcache of the *previous* page. But in the error case of > skcipher_walk_done(), e.g. if the input wasn't an integer number of blocks, > scatterwalk_done() was actually called after advancing 0 bytes. > This caused a crash ("BUG: unable to handle kernel paging request") during > '!PageSlab(page)' on architectures like arm and arm64 that define > ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE, provided that the input was > page-aligned as in that case walk->offset == 0. > > Fix it by reorganizing skcipher_walk_done() to skip the > scatterwalk_advance() and scatterwalk_done() if an error has occurred. > > This bug was found by syzkaller fuzzing. > > Reproducer, assuming ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE: > > #include <linux/if_alg.h> > #include <sys/socket.h> > #include <unistd.h> > > int main() > { > struct sockaddr_alg addr = { > .salg_type = "skcipher", > .salg_name = "cbc(aes-generic)", > }; > char buffer[4096] __attribute__((aligned(4096))) = { 0 }; > int fd; > > fd = socket(AF_ALG, SOCK_SEQPACKET, 0); > bind(fd, (void *)&addr, sizeof(addr)); > setsockopt(fd, SOL_ALG, ALG_SET_KEY, buffer, 16); > fd = accept(fd, NULL, NULL); > write(fd, buffer, 15); > read(fd, buffer, 15); > } > > Reported-by: Liu Chao <liuchao741@xxxxxxxxxx> > Fixes: b286d8b1a690 ("crypto: skcipher - Add skcipher walk interface") > Cc: <stable@xxxxxxxxxxxxxxx> # v4.10+ > Signed-off-by: Eric Biggers <ebiggers@xxxxxxxxxx> > --- > crypto/skcipher.c | 53 ++++++++++++++++++++++++----------------------- > 1 file changed, 27 insertions(+), 26 deletions(-) > > diff --git a/crypto/skcipher.c b/crypto/skcipher.c index > 7d6a49fe3047..5f7017b36d75 100644 > --- a/crypto/skcipher.c > +++ b/crypto/skcipher.c > @@ -95,7 +95,7 @@ static inline u8 *skcipher_get_spot(u8 *start, > unsigned int len) > return max(start, end_page); > } > > -static int skcipher_done_slow(struct skcipher_walk *walk, unsigned int > bsize) > +static void skcipher_done_slow(struct skcipher_walk *walk, unsigned int > +bsize) > { > u8 *addr; > > @@ -103,23 +103,24 @@ static int skcipher_done_slow(struct > skcipher_walk *walk, unsigned int bsize) > addr = skcipher_get_spot(addr, bsize); > scatterwalk_copychunks(addr, &walk->out, bsize, > (walk->flags & SKCIPHER_WALK_PHYS) ? 2 : 1); > - return 0; > } > > int skcipher_walk_done(struct skcipher_walk *walk, int err) { > - unsigned int n = walk->nbytes - err; > - unsigned int nbytes; > - > - nbytes = walk->total - n; > - > - if (unlikely(err < 0)) { > - nbytes = 0; > - n = 0; > - } else if (likely(!(walk->flags & (SKCIPHER_WALK_PHYS | > - SKCIPHER_WALK_SLOW | > - SKCIPHER_WALK_COPY | > - SKCIPHER_WALK_DIFF)))) { > + unsigned int n; /* bytes processed */ > + bool more; > + > + if (unlikely(err < 0)) > + goto finish; > + > + n = walk->nbytes - err; > + walk->total -= n; > + more = (walk->total != 0); > + > + if (likely(!(walk->flags & (SKCIPHER_WALK_PHYS | > + SKCIPHER_WALK_SLOW | > + SKCIPHER_WALK_COPY | > + SKCIPHER_WALK_DIFF)))) { > unmap_src: > skcipher_unmap_src(walk); > } else if (walk->flags & SKCIPHER_WALK_DIFF) { @@ -131,28 > +132,28 @@ int skcipher_walk_done(struct skcipher_walk *walk, int err) > skcipher_unmap_dst(walk); > } else if (unlikely(walk->flags & SKCIPHER_WALK_SLOW)) { > if (WARN_ON(err)) { > + /* unexpected case; didn't process all bytes */ > err = -EINVAL; > - nbytes = 0; > - } else > - n = skcipher_done_slow(walk, n); > + goto finish; > + } > + skcipher_done_slow(walk, n); > + goto already_advanced; > } > > - if (err > 0) > - err = 0; > - > - walk->total = nbytes; > - walk->nbytes = nbytes; > - > scatterwalk_advance(&walk->in, n); > scatterwalk_advance(&walk->out, n); > - scatterwalk_done(&walk->in, 0, nbytes); > - scatterwalk_done(&walk->out, 1, nbytes); > +already_advanced: > + scatterwalk_done(&walk->in, 0, more); > + scatterwalk_done(&walk->out, 1, more); > > - if (nbytes) { > + if (more) { > crypto_yield(walk->flags & SKCIPHER_WALK_SLEEP ? > CRYPTO_TFM_REQ_MAY_SLEEP : 0); > return skcipher_walk_next(walk); > } > + err = 0; > +finish: > + walk->nbytes = 0; > > /* Short-circuit for the common/fast path. */ > if (!((unsigned long)walk->buffer | (unsigned long)walk->page)) > -- > 2.18.0.233.g985f88cf7e-goog