From: Timur Tabi <timur@xxxxxxxxxxxxxx> Add support for probing on ACPI systems, with ACPI HID QCOM8160. On ACPI systems, clocks are always enabled, the PRNG should already be enabled, and the register region is read-only. The driver only verifies that the hardware is already enabled never tries to disable or configure it. Signed-off-by: Timur Tabi <timur@xxxxxxxxxxxxxx> Tested-by: Jeffrey Hugo <jhugo@xxxxxxxxxxxxxx> [port to crypto API] Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx> --- drivers/crypto/qcom-rng.c | 20 +++++++++++++++++--- 1 file changed, 17 insertions(+), 3 deletions(-) diff --git a/drivers/crypto/qcom-rng.c b/drivers/crypto/qcom-rng.c index 80544326e310..e54249ccc009 100644 --- a/drivers/crypto/qcom-rng.c +++ b/drivers/crypto/qcom-rng.c @@ -4,6 +4,7 @@ // Based on msm-rng.c and downstream driver #include <crypto/internal/rng.h> +#include <linux/acpi.h> #include <linux/clk.h> #include <linux/crypto.h> #include <linux/module.h> @@ -168,9 +169,13 @@ static int qcom_rng_probe(struct platform_device *pdev) if (IS_ERR(rng->base)) return PTR_ERR(rng->base); - rng->clk = devm_clk_get(&pdev->dev, "core"); - if (IS_ERR(rng->clk)) - return PTR_ERR(rng->clk); + /* ACPI systems have clk already on, so skip clk_get */ + if (!has_acpi_companion(&pdev->dev)) { + rng->clk = devm_clk_get(&pdev->dev, "core"); + if (IS_ERR(rng->clk)) + return PTR_ERR(rng->clk); + } + rng->skip_init = (unsigned long)device_get_match_data(&pdev->dev); @@ -193,6 +198,14 @@ static int qcom_rng_remove(struct platform_device *pdev) return 0; } +#if IS_ENABLED(CONFIG_ACPI) +static const struct acpi_device_id qcom_rng_acpi_match[] = { + { .id = "QCOM8160", .driver_data = 1 }, + {} +}; +MODULE_DEVICE_TABLE(acpi, qcom_rng_acpi_match); +#endif + static const struct of_device_id qcom_rng_of_match[] = { { .compatible = "qcom,prng", .data = (void *)0}, { .compatible = "qcom,prng-ee", .data = (void *)1}, @@ -206,6 +219,7 @@ static struct platform_driver qcom_rng_driver = { .driver = { .name = KBUILD_MODNAME, .of_match_table = of_match_ptr(qcom_rng_of_match), + .acpi_match_table = ACPI_PTR(qcom_rng_acpi_match), } }; module_platform_driver(qcom_rng_driver); -- 2.14.4