On Fri, Jun 01, 2018 at 10:12:24AM +0200, Geert Uytterhoeven wrote:
> Hi Gilad,
>
> On Thu, May 31, 2018 at 1:55 PM, Gilad Ben-Yossef <gilad@xxxxxxxxxxxxx> wrote:
> > On Tue, May 29, 2018 at 7:19 PM, Simon Horman <horms@xxxxxxxxxxxx> wrote:
> >> On Thu, May 24, 2018 at 03:19:10PM +0100, Gilad Ben-Yossef wrote:
> >>> Add bindings for CryptoCell instance in the SoC.
> >>>
> >>> Signed-off-by: Gilad Ben-Yossef <gilad@xxxxxxxxxxxxx>
> >>
> >> In so far as I can review the details of this (which is not much) this
> >> looks fine to me. I am, however, a little unclear in when it should be
> >> accepted.
> >
> > Since Herbert Xu ACKed the driver changes, I would say the only gating
> > commit is Geert's CR clock patch.
>
> These are queued for v4.19.
>
> > If that one is in, than I would say this one should go in as well.
>
> As the device node now has a power-domains property, the genpd code will
> try to attach it to the CPG/MSSR PM Domain, which is a clock domain.
> In the absence of the clock patch, the device's module clock cannot be
> found, and dev_pm_domain_attach() and thus platform_drv_probe() will fail,
> before calling the device driver's .probe() function.
>
> So there is no longer a dependency on the clock patch, and the DT patch can
> go in in parallel (although I prefer its subject to be changed
> s/binding/device device/).
Thanks, I have applied the following (but may not push until next week).
From: Gilad Ben-Yossef <gilad@xxxxxxxxxxxxx>
Subject: [PATCH] arm64: dts: renesas: r8a7795: add ccree to device tree
Add bindings for CryptoCell instance in the SoC.
Signed-off-by: Gilad Ben-Yossef <gilad@xxxxxxxxxxxxx>
Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
Signed-off-by: Simon Horman <horms+renesas@xxxxxxxxxxxx>
---
arch/arm64/boot/dts/renesas/r8a7795.dtsi | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
index d842940b2f43..3ac75dbf2d93 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
@@ -528,6 +528,15 @@
status = "disabled";
};
+ arm_cc630p: crypto@e6601000 {
+ compatible = "arm,cryptocell-630p-ree";
+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0 0xe6601000 0 0x1000>;
+ clocks = <&cpg CPG_MOD 229>;
+ resets = <&cpg 229>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ };
+
i2c3: i2c@e66d0000 {
#address-cells = <1>;
#size-cells = <0>;
--
2.11.0
