In some cases the CCB DMA-based internal transfer started by the MOVE command (src=M3 register, dst=descriptor buffer) does not finish in time and DECO executes the unpatched descriptor. This leads eventually to a DECO Watchdog Timer timeout error. To make sure the transfer ends, change the MOVE command to be blocking. Signed-off-by: Horia Geantă <horia.geanta@xxxxxxx> --- drivers/crypto/caam/caamalg_desc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/crypto/caam/caamalg_desc.c b/drivers/crypto/caam/caamalg_desc.c index 8ae7a1be7dfd..a408edd84f34 100644 --- a/drivers/crypto/caam/caamalg_desc.c +++ b/drivers/crypto/caam/caamalg_desc.c @@ -1093,7 +1093,7 @@ void cnstr_shdsc_rfc4543_encap(u32 * const desc, struct alginfo *cdata, read_move_cmd = append_move(desc, MOVE_SRC_DESCBUF | MOVE_DEST_MATH3 | (0x6 << MOVE_LEN_SHIFT)); write_move_cmd = append_move(desc, MOVE_SRC_MATH3 | MOVE_DEST_DESCBUF | - (0x8 << MOVE_LEN_SHIFT)); + (0x8 << MOVE_LEN_SHIFT) | MOVE_WAITCOMP); /* Will read assoclen + cryptlen bytes */ append_math_sub(desc, VARSEQINLEN, SEQINLEN, REG0, CAAM_CMD_SZ); @@ -1178,7 +1178,7 @@ void cnstr_shdsc_rfc4543_decap(u32 * const desc, struct alginfo *cdata, read_move_cmd = append_move(desc, MOVE_SRC_DESCBUF | MOVE_DEST_MATH3 | (0x6 << MOVE_LEN_SHIFT)); write_move_cmd = append_move(desc, MOVE_SRC_MATH3 | MOVE_DEST_DESCBUF | - (0x8 << MOVE_LEN_SHIFT)); + (0x8 << MOVE_LEN_SHIFT) | MOVE_WAITCOMP); /* Will read assoclen + cryptlen bytes */ append_math_sub(desc, VARSEQINLEN, SEQOUTLEN, REG0, CAAM_CMD_SZ); -- 2.16.2
