V2-resend: - Patch 0005 lost in the ether - resending V2: - Endian detection is ok with TrustZone enabled Horia. Endian detection logic tested with TrustZone enabled. The register that this relies on though isn't affected by the lock-down in the first page. Assuming set of affected registers is actually just the 'deco' registers though there is no formal statement of that, that I am aware of. - Moving of TrustZone work-around into u-boot This set actually doesn't need to deal with TrustZone at all now but, for the sake of consistency keeping thread title https://patchwork.ozlabs.org/patch/866460/ https://patchwork.ozlabs.org/patch/866462/ https://patchwork.ozlabs.org/patch/865890/ - Reworded endless loop fix to read a bit better - Fixes to DTS additions - Rui - Fixes to number of clocks declared - Rui V1: This patch-set enables CAAM on the i.MX7s and fixes a number of issues identified with the CAAM driver and hardware when TrustZone mode is enabled. The first block of patches are simple bug-fixes, followed by a second block of patches which are simple enabling patches for the i.MX7Solo - note we aren't enabling for the i.MX7Dual since we don't have hardware to test that out but it should be a 1:1 mapping for others to enable when appropriate. The final block in this series implements a fix for using the CAAM when OPTEE/TrustZone is enabled. The various details are logged in these threads. Link: https://github.com/OP-TEE/optee_os/issues/1408 Link: https://tinyurl.com/yam5gv9a Link: https://patchwork.ozlabs.org/cover/865042 In simple terms, when TrustZone is active the first page of the CAAM becomes inaccessible to Linux as it has a special 'TZ bit' associated with it that software cannot toggle or even view AFAIK. The patches here then 1. Detect when TrustZone is active 2. Detect if u-boot (or OPTEE) has already initialized the RNG and loads the CAAM driver in a different way - skipping over the RNG initialization that Linux now no-longer has permissions to carry out. Should #1 be true but #2 not be true, driver loading stops (and Rui's patch for the NULL pointer dereference fixes a cash on this path). If #2 is true but #1 is not then it's a NOP as Linux has full permission to rewrite the deco registers in the first page of CAAM registers. Finally then if #1 and #2 are true, the fixes here allow the CAAM to come up and for the RNG to be useable again. Bryan O'Donoghue (1): crypto: caam: Fix endless loop when RNG is already initialized Rui Miguel Silva (4): crypto: caam: Fix null dereference at error path crypto: caam: do not use mem and emi_slow clock for imx7x clk: imx7d: add CAAM clock ARM: dts: imx7s: add CAAM device node arch/arm/boot/dts/imx7s.dtsi | 31 +++++++++++++++++++++++ drivers/clk/imx/clk-imx7d.c | 1 + drivers/crypto/caam/ctrl.c | 45 ++++++++++++++++++++------------- include/dt-bindings/clock/imx7d-clock.h | 3 ++- 4 files changed, 61 insertions(+), 19 deletions(-) -- 2.7.4
