This patch introduces the multi-buffer job manager which is responsible
for submitting scatter-gather buffers from several AES CBC jobs
to the multi-buffer algorithm. The glue code interfaces with the
underlying algorithm that handles 8 data streams of AES CBC encryption
in parallel. AES key expansion and CBC decryption requests are performed
in a manner similar to the existing AESNI Intel glue driver.
The outline of the algorithm for AES CBC encryption requests is
sketched below:
Any driver requesting the crypto service will place an async crypto
request on the workqueue. The multi-buffer crypto daemon will pull an
AES CBC encryption request from work queue and put each request in an
empty data lane for multi-buffer crypto computation. When all the empty
lanes are filled, computation will commence on the jobs in parallel and
the job with the shortest remaining buffer will get completed and be
returned. To prevent prolonged stall, when no new jobs arrive, we will
flush workqueue of jobs after a maximum allowable delay has elapsed.
To accommodate the fragmented nature of scatter-gather, we will keep
submitting the next scatter-buffer fragment for a job for multi-buffer
computation until a job is completed and no more buffer fragments
remain. At that time we will pull a new job to fill the now empty data
slot. We check with the multibuffer scheduler to see if there are other
completed jobs to prevent extraneous delay in returning any completed
jobs.
This multi-buffer algorithm should be used for cases where we get at
least 8 streams of crypto jobs submitted at a reasonably high rate.
For low crypto job submission rate and low number of data streams, this
algorithm will not be beneficial. The reason is at low rate, we do not
fill out the data lanes before flushing the jobs instead of processing
them with all the data lanes full. We will miss the benefit of parallel
computation, and adding delay to the processing of the crypto job at the
same time. Some tuning of the maximum latency parameter may be needed
to get the best performance.
Originally-by: Chandramouli Narayanan <mouli_7982@xxxxxxxxx>
Signed-off-by: Megha Dey <megha.dey@xxxxxxxxxxxxxxx>
Acked-by: Tim Chen <tim.c.chen@xxxxxxxxxxxxxxx>
---
arch/x86/crypto/Makefile | 1 +
arch/x86/crypto/aes-cbc-mb/Makefile | 22 +
arch/x86/crypto/aes-cbc-mb/aes_cbc_mb.c | 698 ++++++++++++++++++++++++++++++++
3 files changed, 721 insertions(+)
create mode 100644 arch/x86/crypto/aes-cbc-mb/Makefile
create mode 100644 arch/x86/crypto/aes-cbc-mb/aes_cbc_mb.c
diff --git a/arch/x86/crypto/Makefile b/arch/x86/crypto/Makefile
index 5f07333..3844f06 100644
--- a/arch/x86/crypto/Makefile
+++ b/arch/x86/crypto/Makefile
@@ -36,6 +36,7 @@ obj-$(CONFIG_CRYPTO_CRC32_PCLMUL) += crc32-pclmul.o
obj-$(CONFIG_CRYPTO_SHA256_SSSE3) += sha256-ssse3.o
obj-$(CONFIG_CRYPTO_SHA512_SSSE3) += sha512-ssse3.o
obj-$(CONFIG_CRYPTO_CRCT10DIF_PCLMUL) += crct10dif-pclmul.o
+obj-$(CONFIG_CRYPTO_AES_CBC_MB) += aes-cbc-mb/
obj-$(CONFIG_CRYPTO_POLY1305_X86_64) += poly1305-x86_64.o
# These modules require assembler to support AVX.
diff --git a/arch/x86/crypto/aes-cbc-mb/Makefile b/arch/x86/crypto/aes-cbc-mb/Makefile
new file mode 100644
index 0000000..b642bd8
--- /dev/null
+++ b/arch/x86/crypto/aes-cbc-mb/Makefile
@@ -0,0 +1,22 @@
+#
+# Arch-specific CryptoAPI modules.
+#
+
+avx_supported := $(call as-instr,vpxor %xmm0$(comma)%xmm0$(comma)%xmm0,yes,no)
+
+# we need decryption and key expansion routine symbols
+# if either AESNI_NI_INTEL or AES_CBC_MB is a module
+
+ifeq ($(CONFIG_CRYPTO_AES_NI_INTEL),m)
+ dec_support := ../aesni-intel_asm.o
+endif
+ifeq ($(CONFIG_CRYPTO_AES_CBC_MB),m)
+ dec_support := ../aesni-intel_asm.o
+endif
+
+ifeq ($(avx_supported),yes)
+ obj-$(CONFIG_CRYPTO_AES_CBC_MB) += aes-cbc-mb.o
+ aes-cbc-mb-y := $(dec_support) aes_cbc_mb.o aes_mb_mgr_init.o \
+ mb_mgr_inorder_x8_asm.o mb_mgr_ooo_x8_asm.o \
+ aes_cbc_enc_x8.o
+endif
diff --git a/arch/x86/crypto/aes-cbc-mb/aes_cbc_mb.c b/arch/x86/crypto/aes-cbc-mb/aes_cbc_mb.c
new file mode 100644
index 0000000..af09c4b
--- /dev/null
+++ b/arch/x86/crypto/aes-cbc-mb/aes_cbc_mb.c
@@ -0,0 +1,698 @@
+/*
+ * Multi buffer AES CBC algorithm glue code
+ *
+ *
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2016 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * Contact Information:
+ * James Guilford <james.guilford@xxxxxxxxx>
+ * Sean Gulley <sean.m.gulley@xxxxxxxxx>
+ * Tim Chen <tim.c.chen@xxxxxxxxxxxxxxx>
+ * Megha Dey <megha.dey@xxxxxxxxxxxxxxx>
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+#define CRYPTO_AES_CTX_SIZE (sizeof(struct crypto_aes_ctx) + AESNI_ALIGN_EXTRA)
+#define AESNI_ALIGN_EXTRA ((AESNI_ALIGN - 1) & ~(CRYPTO_MINALIGN - 1))
+#include <linux/hardirq.h>
+#include <linux/types.h>
+#include <linux/crypto.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <crypto/algapi.h>
+#include <crypto/aes.h>
+#include <crypto/internal/hash.h>
+#include <crypto/mcryptd.h>
+#include <crypto/crypto_wq.h>
+#include <crypto/ctr.h>
+#include <crypto/b128ops.h>
+#include <crypto/lrw.h>
+#include <crypto/xts.h>
+#include <asm/cpu_device_id.h>
+#include <asm/fpu/api.h>
+#include <asm/crypto/aes.h>
+#include <crypto/ablk_helper.h>
+#include <crypto/scatterwalk.h>
+#include <crypto/internal/aead.h>
+#include <linux/workqueue.h>
+#include <linux/spinlock.h>
+#include <crypto/internal/skcipher.h>
+#ifdef CONFIG_X86_64
+#include <asm/crypto/glue_helper.h>
+#endif
+
+#include "aes_cbc_mb_ctx.h"
+
+#define AESNI_ALIGN (16)
+#define AES_BLOCK_MASK (~(AES_BLOCK_SIZE-1))
+#define FLUSH_INTERVAL 500 /* in usec */
+
+static struct mcryptd_alg_state cbc_mb_alg_state;
+
+struct aes_cbc_mb_ctx {
+ struct mcryptd_skcipher *mcryptd_tfm;
+};
+
+static inline struct aes_cbc_mb_mgr_inorder_x8
+ *get_key_mgr(void *mgr, u32 key_len)
+{
+ struct aes_cbc_mb_mgr_inorder_x8 *key_mgr;
+
+ key_mgr = (struct aes_cbc_mb_mgr_inorder_x8 *) mgr;
+ /* valid keysize is guranteed to be one of 128/192/256 */
+ switch (key_len) {
+ case AES_KEYSIZE_256:
+ return key_mgr+2;
+ case AES_KEYSIZE_192:
+ return key_mgr+1;
+ case AES_KEYSIZE_128:
+ default:
+ return key_mgr;
+ }
+}
+
+/* support code from arch/x86/crypto/aesni-intel_glue.c */
+static inline struct crypto_aes_ctx *aes_ctx(void *raw_ctx)
+{
+ unsigned long addr = (unsigned long)raw_ctx;
+ unsigned long align = AESNI_ALIGN;
+ struct crypto_aes_ctx *ret_ctx;
+
+ if (align <= crypto_tfm_ctx_alignment())
+ align = 1;
+ ret_ctx = (struct crypto_aes_ctx *)ALIGN(addr, align);
+ return ret_ctx;
+}
+
+static struct job_aes_cbc *aes_cbc_job_mgr_submit(
+ struct aes_cbc_mb_mgr_inorder_x8 *key_mgr, u32 key_len)
+{
+ /* valid keysize is guranteed to be one of 128/192/256 */
+ switch (key_len) {
+ case AES_KEYSIZE_256:
+ return aes_cbc_submit_job_inorder_256x8(key_mgr);
+ case AES_KEYSIZE_192:
+ return aes_cbc_submit_job_inorder_192x8(key_mgr);
+ case AES_KEYSIZE_128:
+ default:
+ return aes_cbc_submit_job_inorder_128x8(key_mgr);
+ }
+}
+
+static inline struct skcipher_request *cast_mcryptd_ctx_to_req(
+ struct mcryptd_skcipher_request_ctx *ctx)
+{
+ return container_of((void *) ctx, struct skcipher_request, __ctx);
+}
+
+/*
+ * Interface functions to the synchronous algorithm with acces
+ * to the underlying multibuffer AES CBC implementation
+ */
+
+/* Map the error in request context appropriately */
+
+static struct mcryptd_skcipher_request_ctx *process_job_sts(
+ struct job_aes_cbc *job)
+{
+ struct mcryptd_skcipher_request_ctx *ret_rctx;
+
+ ret_rctx = (struct mcryptd_skcipher_request_ctx *)job->user_data;
+
+ switch (job->status) {
+ default:
+ case STS_COMPLETED:
+ ret_rctx->error = CBC_CTX_ERROR_NONE;
+ break;
+ case STS_BEING_PROCESSED:
+ ret_rctx->error = -EINPROGRESS;
+ break;
+ case STS_INTERNAL_ERROR:
+ case STS_ERROR:
+ case STS_UNKNOWN:
+ /* mark it done with error */
+ ret_rctx->flag = CBC_DONE;
+ ret_rctx->error = -EIO;
+ break;
+ }
+ return ret_rctx;
+}
+
+static struct mcryptd_skcipher_request_ctx
+ *aes_cbc_ctx_mgr_flush(struct aes_cbc_mb_mgr_inorder_x8 *key_mgr)
+{
+ struct job_aes_cbc *job;
+
+ job = aes_cbc_flush_job_inorder_x8(key_mgr);
+ if (job)
+ return process_job_sts(job);
+ return NULL;
+}
+
+static struct mcryptd_skcipher_request_ctx *aes_cbc_ctx_mgr_submit(
+ struct aes_cbc_mb_mgr_inorder_x8 *key_mgr,
+ struct mcryptd_skcipher_request_ctx *rctx
+ )
+{
+ struct crypto_aes_ctx *mb_key_ctx;
+ struct job_aes_cbc *job;
+ unsigned long src_paddr;
+ unsigned long dst_paddr;
+
+ mb_key_ctx = aes_ctx(crypto_tfm_ctx(rctx->desc.base.tfm));
+
+ /* get job, fill the details and submit */
+ job = aes_cbc_get_next_job_inorder_x8(key_mgr);
+
+ src_paddr = (page_to_phys(rctx->walk.src.phys.page) +
+ rctx->walk.src.phys.offset);
+ dst_paddr = (page_to_phys(rctx->walk.dst.phys.page) +
+ rctx->walk.dst.phys.offset);
+ job->plaintext = phys_to_virt(src_paddr);
+ job->ciphertext = phys_to_virt(dst_paddr);
+ if (rctx->flag & CBC_START) {
+ /* fresh sequence, copy iv from walk buffer initially */
+ memcpy(&job->iv, rctx->walk.iv, AES_BLOCK_SIZE);
+ rctx->flag &= ~CBC_START;
+ } else {
+ /* For a multi-part sequence, set up the updated IV */
+ job->iv = rctx->seq_iv;
+ }
+
+ job->keys = (u128 *)mb_key_ctx->key_enc;
+ /* set up updated length from the walk buffers */
+ job->len = rctx->walk.nbytes & AES_BLOCK_MASK;
+ /* stow away the req_ctx so we can later check */
+ job->user_data = (void *)rctx;
+ job->key_len = mb_key_ctx->key_length;
+ rctx->job = job;
+ rctx->error = CBC_CTX_ERROR_NONE;
+ job = aes_cbc_job_mgr_submit(key_mgr, mb_key_ctx->key_length);
+ if (job) {
+ /* we already have the request context stashed in job */
+ return process_job_sts(job);
+ }
+ return NULL;
+}
+
+static int cbc_encrypt_finish(struct mcryptd_skcipher_request_ctx **ret_rctx,
+ struct mcryptd_alg_cstate *cstate,
+ bool flush)
+{
+ struct mcryptd_skcipher_request_ctx *rctx = *ret_rctx;
+ struct job_aes_cbc *job;
+ int err = 0;
+ unsigned int nbytes;
+ struct crypto_aes_ctx *mb_key_ctx;
+ struct aes_cbc_mb_mgr_inorder_x8 *key_mgr;
+ struct skcipher_request *req;
+
+
+ mb_key_ctx = aes_ctx(crypto_tfm_ctx(rctx->desc.base.tfm));
+ key_mgr = get_key_mgr(cstate->mgr, mb_key_ctx->key_length);
+
+ /*
+ * Some low-level mb job is done. Keep going till done.
+ * This loop may process multiple multi part requests
+ */
+ while (!(rctx->flag & CBC_DONE)) {
+ /* update bytes and check for more work */
+ nbytes = rctx->walk.nbytes & (AES_BLOCK_SIZE - 1);
+ req = cast_mcryptd_ctx_to_req(rctx);
+ err = skcipher_walk_done(&rctx->walk, nbytes);
+ if (err) {
+ /* done with error */
+ rctx->flag = CBC_DONE;
+ rctx->error = err;
+ goto out;
+ }
+ nbytes = rctx->walk.nbytes;
+ if (!nbytes) {
+ /* done with successful encryption */
+ rctx->flag = CBC_DONE;
+ goto out;
+ }
+ /*
+ * This is a multi-part job and there is more work to do.
+ * From the completed job, copy the running sequence of IV
+ * and start the next one in sequence.
+ */
+ job = (struct job_aes_cbc *)rctx->job;
+ rctx->seq_iv = job->iv; /* copy the running sequence of iv */
+ kernel_fpu_begin();
+ rctx = aes_cbc_ctx_mgr_submit(key_mgr, rctx);
+ if (!rctx) {
+ /* multi part job submitted, no completed job. */
+ if (flush)
+ rctx = aes_cbc_ctx_mgr_flush(key_mgr);
+ }
+ kernel_fpu_end();
+ if (!rctx) {
+ /* no completions yet to process further */
+ break;
+ }
+ /* some job finished when we submitted multi part job. */
+ if (rctx->error) {
+ /*
+ * some request completed with error
+ * bail out of chain processing
+ */
+ err = rctx->error;
+ break;
+ }
+ /* we have a valid request context to process further */
+ }
+ /* encrypted text is expected to be in out buffer already */
+out:
+ /* We came out multi-part processing for some request */
+ *ret_rctx = rctx;
+ return err;
+}
+
+/* A request that completed is dequeued and the caller is notified */
+
+static void completion_callback(struct mcryptd_skcipher_request_ctx *rctx,
+ struct mcryptd_alg_cstate *cstate,
+ int err)
+{
+ struct skcipher_request *req = cast_mcryptd_ctx_to_req(rctx);
+
+ /* remove from work list and invoke completion callback */
+ spin_lock(&cstate->work_lock);
+ list_del(&rctx->waiter);
+ spin_unlock(&cstate->work_lock);
+
+ local_bh_disable();
+ rctx->complete(&req->base, err);
+ local_bh_enable();
+}
+
+/* complete a blkcipher request and process any further completions */
+
+static void cbc_complete_job(struct mcryptd_skcipher_request_ctx *rctx,
+ struct mcryptd_alg_cstate *cstate,
+ int err)
+{
+ struct job_aes_cbc *job;
+ int ret;
+ struct mcryptd_skcipher_request_ctx *sctx;
+ struct crypto_aes_ctx *mb_key_ctx;
+ struct aes_cbc_mb_mgr_inorder_x8 *key_mgr;
+ struct skcipher_request *req;
+
+ req = cast_mcryptd_ctx_to_req(rctx);
+ skcipher_walk_complete(&rctx->walk, err);
+ completion_callback(rctx, cstate, err);
+
+ mb_key_ctx = aes_ctx(crypto_tfm_ctx(rctx->desc.base.tfm));
+ key_mgr = get_key_mgr(cstate->mgr, mb_key_ctx->key_length);
+
+ /* check for more completed jobs and process */
+ while ((job = aes_cbc_get_completed_job_inorder_x8(key_mgr)) != NULL) {
+ sctx = process_job_sts(job);
+ if (WARN_ON(sctx == NULL))
+ return;
+ ret = sctx->error;
+ if (!ret) {
+ /* further process it */
+ ret = cbc_encrypt_finish(&sctx, cstate, false);
+ }
+ if (sctx) {
+ req = cast_mcryptd_ctx_to_req(sctx);
+ skcipher_walk_complete(&sctx->walk, err);
+ completion_callback(sctx, cstate, ret);
+ }
+ }
+}
+
+/* Add request to the waiter list. It stays in queue until completion */
+
+static void cbc_mb_add_list(struct mcryptd_skcipher_request_ctx *rctx,
+ struct mcryptd_alg_cstate *cstate)
+{
+ unsigned long next_flush;
+ unsigned long delay = usecs_to_jiffies(FLUSH_INTERVAL);
+
+ /* initialize tag */
+ rctx->tag.arrival = jiffies; /* tag the arrival time */
+ rctx->tag.seq_num = cstate->next_seq_num++;
+ next_flush = rctx->tag.arrival + delay;
+ rctx->tag.expire = next_flush;
+
+ spin_lock(&cstate->work_lock);
+ list_add_tail(&rctx->waiter, &cstate->work_list);
+ spin_unlock(&cstate->work_lock);
+
+ mcryptd_arm_flusher(cstate, delay);
+}
+
+static int mb_aes_cbc_encrypt(struct skcipher_request *desc)
+{
+ struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(desc);
+ struct mcryptd_skcipher_request_ctx *rctx =
+ container_of(desc, struct mcryptd_skcipher_request_ctx, desc);
+ struct mcryptd_skcipher_request_ctx *ret_rctx;
+ struct mcryptd_alg_cstate *cstate =
+ this_cpu_ptr(cbc_mb_alg_state.alg_cstate);
+ int err;
+ int ret = 0;
+ struct crypto_aes_ctx *mb_key_ctx;
+ struct aes_cbc_mb_mgr_inorder_x8 *key_mgr;
+ struct skcipher_request *req;
+
+ mb_key_ctx = aes_ctx(crypto_skcipher_ctx(tfm));
+ key_mgr = get_key_mgr(cstate->mgr, mb_key_ctx->key_length);
+
+ /* sanity check */
+ if (rctx->tag.cpu != smp_processor_id()) {
+ /* job not on list yet */
+ pr_err("mcryptd error: cpu clash\n");
+ goto done;
+ }
+
+ /* a new job, initialize the cbc context and add to worklist */
+ cbc_ctx_init(rctx, desc->cryptlen, CBC_ENCRYPT);
+ cbc_mb_add_list(rctx, cstate);
+
+ req = cast_mcryptd_ctx_to_req(rctx);
+
+ err = skcipher_walk_async(&rctx->walk, req);
+ if (err || !rctx->walk.nbytes) {
+ /* terminate this request */
+ skcipher_walk_complete(&rctx->walk, err);
+ completion_callback(rctx, cstate, (!err) ? -EINVAL : err);
+ return 0;
+ }
+ /* submit job */
+ kernel_fpu_begin();
+ ret_rctx = aes_cbc_ctx_mgr_submit(key_mgr, rctx);
+ kernel_fpu_end();
+
+ if (!ret_rctx)
+ return -EINPROGRESS;
+
+ /* some job completed */
+ if (ret_rctx->error) {
+ /* some job finished with error */
+ cbc_complete_job(ret_rctx, cstate, ret_rctx->error);
+ return 0;
+ }
+ /* some job finished without error, process it */
+ ret = cbc_encrypt_finish(&ret_rctx, cstate, false);
+
+ if (!ret_rctx)
+ return -EINPROGRESS;
+
+done:
+ /* complete the job */
+ cbc_complete_job(ret_rctx, cstate, ret);
+ return 0;
+}
+
+static int mb_aes_cbc_decrypt(struct skcipher_request *desc)
+{
+ struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(desc);
+ struct crypto_aes_ctx *aesni_ctx;
+ struct mcryptd_skcipher_request_ctx *rctx =
+ container_of(desc, struct mcryptd_skcipher_request_ctx, desc);
+ struct skcipher_request *req;
+ bool is_mcryptd_req;
+ unsigned long src_paddr;
+ unsigned long dst_paddr;
+ unsigned int nbytes;
+ int err;
+
+ /* note here whether it is mcryptd req */
+ is_mcryptd_req = desc->base.flags & CRYPTO_TFM_REQ_MAY_SLEEP;
+ req = cast_mcryptd_ctx_to_req(rctx);
+ aesni_ctx = aes_ctx(crypto_skcipher_ctx(tfm));
+
+ err = skcipher_walk_async(&rctx->walk, req);
+ if (err || !rctx->walk.nbytes)
+ goto done1;
+
+ kernel_fpu_begin();
+ while ((nbytes = rctx->walk.nbytes)) {
+ src_paddr = (page_to_phys(rctx->walk.src.phys.page) +
+ rctx->walk.src.phys.offset);
+ dst_paddr = (page_to_phys(rctx->walk.dst.phys.page) +
+ rctx->walk.dst.phys.offset);
+ aesni_cbc_dec(aesni_ctx, phys_to_virt(dst_paddr),
+ phys_to_virt(src_paddr),
+ rctx->walk.nbytes & AES_BLOCK_MASK,
+ rctx->walk.iv);
+ nbytes &= AES_BLOCK_SIZE - 1;
+ err = skcipher_walk_done(&rctx->walk, nbytes);
+ if (err)
+ goto done2;
+ }
+done2:
+ kernel_fpu_end();
+done1:
+ skcipher_walk_complete(&rctx->walk, err);
+ if (!is_mcryptd_req) {
+ /* synchronous request */
+ return err;
+ }
+ local_bh_disable();
+ rctx->complete(&req->base, err);
+ local_bh_enable();
+
+ return 0;
+}
+
+/* use the same common code in aesni to expand key */
+
+static int aes_set_key_common(struct crypto_tfm *tfm, void *raw_ctx,
+ const u8 *in_key, unsigned int key_len)
+{
+ struct crypto_aes_ctx *ctx = aes_ctx(raw_ctx);
+ u32 *flags = &tfm->crt_flags;
+ int err;
+
+ if (key_len != AES_KEYSIZE_128 && key_len != AES_KEYSIZE_192 &&
+ key_len != AES_KEYSIZE_256) {
+ *flags |= CRYPTO_TFM_RES_BAD_KEY_LEN;
+ return -EINVAL;
+ }
+
+ if (!irq_fpu_usable())
+ err = crypto_aes_expand_key(ctx, in_key, key_len);
+ else {
+ kernel_fpu_begin();
+ err = aesni_set_key(ctx, in_key, key_len);
+ kernel_fpu_end();
+ }
+
+ return err;
+}
+
+static int aes_set_key(struct crypto_skcipher *tfm, const u8 *in_key,
+ unsigned int key_len)
+{
+ return aes_set_key_common(crypto_skcipher_tfm(tfm),
+ crypto_skcipher_ctx(tfm), in_key, key_len);
+}
+
+/*
+ * CRYPTO_ALG_ASYNC flag is passed to indicate we have an ablk
+ * scatter-gather walk.
+ */
+static struct skcipher_alg aes_cbc_mb_alg = {
+ .base = {
+ .cra_name = "cbc(aes)",
+ .cra_driver_name = "cbc-aes-aesni-mb",
+ .cra_priority = 500,
+ .cra_flags = CRYPTO_ALG_INTERNAL |
+ CRYPTO_ALG_ASYNC,
+ .cra_blocksize = AES_BLOCK_SIZE,
+ .cra_ctxsize = CRYPTO_AES_CTX_SIZE,
+ .cra_module = THIS_MODULE,
+ },
+ .min_keysize = AES_MIN_KEY_SIZE,
+ .max_keysize = AES_MAX_KEY_SIZE,
+ .ivsize = AES_BLOCK_SIZE,
+ .setkey = aes_set_key,
+ .encrypt = mb_aes_cbc_encrypt,
+ .decrypt = mb_aes_cbc_decrypt
+};
+
+/*
+ * When there are no new jobs arriving, the multibuffer queue may stall.
+ * To prevent prolonged stall, the flusher can be invoked to alleviate
+ * the following conditions:
+ * a) There are partially completed multi-part crypto jobs after a
+ * maximum allowable delay
+ * b) We have exhausted crypto jobs in queue, and the cpu
+ * does not have other tasks and cpu will become idle otherwise.
+ */
+unsigned long cbc_mb_flusher(struct mcryptd_alg_cstate *cstate)
+{
+ struct mcryptd_skcipher_request_ctx *rctx;
+ unsigned long cur_time;
+ unsigned long next_flush = 0;
+
+ struct crypto_aes_ctx *mb_key_ctx;
+ struct aes_cbc_mb_mgr_inorder_x8 *key_mgr;
+
+
+ cur_time = jiffies;
+
+ while (!list_empty(&cstate->work_list)) {
+ rctx = list_entry(cstate->work_list.next,
+ struct mcryptd_skcipher_request_ctx, waiter);
+ if time_before(cur_time, rctx->tag.expire)
+ break;
+
+ mb_key_ctx = aes_ctx(crypto_tfm_ctx(rctx->desc.base.tfm));
+ key_mgr = get_key_mgr(cstate->mgr, mb_key_ctx->key_length);
+
+ kernel_fpu_begin();
+ rctx = aes_cbc_ctx_mgr_flush(key_mgr);
+ kernel_fpu_end();
+ if (!rctx) {
+ pr_err("%s: nothing got flushed\n", __func__);
+ break;
+ }
+ cbc_encrypt_finish(&rctx, cstate, true);
+ if (rctx)
+ cbc_complete_job(rctx, cstate, rctx->error);
+ }
+
+ if (!list_empty(&cstate->work_list)) {
+ rctx = list_entry(cstate->work_list.next,
+ struct mcryptd_skcipher_request_ctx, waiter);
+ /* get the blkcipher context and then flush time */
+ next_flush = rctx->tag.expire;
+ mcryptd_arm_flusher(cstate, get_delay(next_flush));
+ }
+ return next_flush;
+}
+struct mcryptd_skcipher_alg_mb *aes_cbc_mb_mcryptd_skciphers;
+
+static int __init aes_cbc_mb_mod_init(void)
+{
+ struct mcryptd_skcipher_alg_mb *mcryptd;
+
+ int cpu, i;
+ int err;
+ struct mcryptd_alg_cstate *cpu_state;
+ struct aes_cbc_mb_mgr_inorder_x8 *key_mgr;
+
+ /* check for dependent cpu features */
+ if (!boot_cpu_has(X86_FEATURE_AES)) {
+ pr_err("%s: no aes support\n", __func__);
+ err = -ENODEV;
+ goto err1;
+ }
+
+ if (!boot_cpu_has(X86_FEATURE_XMM)) {
+ pr_err("%s: no xmm support\n", __func__);
+ err = -ENODEV;
+ goto err1;
+ }
+
+ /* initialize multibuffer structures */
+
+ cbc_mb_alg_state.alg_cstate = alloc_percpu(struct mcryptd_alg_cstate);
+ if (!cbc_mb_alg_state.alg_cstate) {
+ pr_err("%s: insufficient memory\n", __func__);
+ err = -ENOMEM;
+ goto err1;
+ }
+
+ for_each_possible_cpu(cpu) {
+ cpu_state = per_cpu_ptr(cbc_mb_alg_state.alg_cstate, cpu);
+ cpu_state->next_flush = 0;
+ cpu_state->next_seq_num = 0;
+ cpu_state->flusher_engaged = false;
+ INIT_DELAYED_WORK(&cpu_state->flush, mcryptd_flusher);
+ cpu_state->cpu = cpu;
+ cpu_state->alg_state = &cbc_mb_alg_state;
+ cpu_state->mgr =
+ (struct aes_cbc_mb_mgr_inorder_x8 *)
+ kzalloc(3 * sizeof(struct aes_cbc_mb_mgr_inorder_x8),
+ GFP_KERNEL);
+ if (!cpu_state->mgr) {
+ err = -ENOMEM;
+ goto err2;
+ }
+ key_mgr = (struct aes_cbc_mb_mgr_inorder_x8 *) cpu_state->mgr;
+ /* initialize manager state for 128, 192 and 256 bit keys */
+ for (i = 0; i < 3; ++i) {
+ aes_cbc_init_mb_mgr_inorder_x8(key_mgr);
+ ++key_mgr;
+ }
+ INIT_LIST_HEAD(&cpu_state->work_list);
+ spin_lock_init(&cpu_state->work_lock);
+ }
+ cbc_mb_alg_state.flusher = &cbc_mb_flusher;
+
+ /* register the synchronous mb algo */
+ err = crypto_register_skcipher(&aes_cbc_mb_alg);
+ if (err)
+ goto err3;
+
+ mcryptd = mcryptd_skcipher_create_mb(aes_cbc_mb_alg.base.cra_name,
+ aes_cbc_mb_alg.base.cra_driver_name);
+ err = PTR_ERR(mcryptd);
+
+ if (IS_ERR(mcryptd))
+ goto unregister_mcryptds;
+
+ aes_cbc_mb_mcryptd_skciphers = mcryptd;
+
+ return 0; /* module init success */
+
+ /* error in algo registration */
+unregister_mcryptds:
+ mcryptd_skcipher_free_mb(aes_cbc_mb_mcryptd_skciphers);
+err3:
+ for_each_possible_cpu(cpu) {
+ cpu_state = per_cpu_ptr(cbc_mb_alg_state.alg_cstate, cpu);
+ kfree(cpu_state->mgr);
+ }
+err2:
+ free_percpu(cbc_mb_alg_state.alg_cstate);
+err1:
+ return err;
+}
+
+static void __exit aes_cbc_mb_mod_fini(void)
+{
+ int cpu;
+ struct mcryptd_alg_cstate *cpu_state;
+
+ mcryptd_skcipher_free_mb(aes_cbc_mb_mcryptd_skciphers);
+ crypto_unregister_skcipher(&aes_cbc_mb_alg);
+
+ for_each_possible_cpu(cpu) {
+ cpu_state = per_cpu_ptr(cbc_mb_alg_state.alg_cstate, cpu);
+ kfree(cpu_state->mgr);
+ }
+ free_percpu(cbc_mb_alg_state.alg_cstate);
+}
+
+module_init(aes_cbc_mb_mod_init);
+module_exit(aes_cbc_mb_mod_fini);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("AES CBC Algorithm, multi buffer accelerated");
+MODULE_AUTHOR("Megha Dey <megha.dey@xxxxxxxxxxxxxxx");
+
+MODULE_ALIAS("aes-cbc-mb");
+MODULE_ALIAS_CRYPTO("cbc-aes-aesni-mb");
--
1.9.1
